References
- R. Yamada, T. Taguchi and N. Igawa: ‘Mechanical and thermal properties of 2 D and 3 D SiC/SiC composites’, J. Nucl. Mater., 2000, 283–287, 574–578.
- A. Sayano, C. Sutoh and S. Suyama: ‘Development of a reaction-sintered silicon carbide matrix composite’, J. Nucl. Mater., 1999, 271, 467–471.
- K. Yoshida, M. Imai and T. Yano: ‘Improvement of the mechanical properties of hot-pressed silicon-carbide-fiber-reinforced silicon carbide composites by polycarbosilane impregnation’, Compos. Sci. Technol., 2001, 61, 1323–1329.
- H. T. Liu, H. F. Cheng, J. Wang, G. P. Tang, R. C. Che and Q. S. Ma: ‘Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites’, Mater. Sci. Eng. A., 2009, 525, 121–127.
- H. T. Liu, H. F. Cheng, J. Wang, R. C. Che, G. P. Tang, and Q. S. Ma: ‘Microstructural investigations of the pyrocarbon interphase in SiC fiber-reinforced SiC matrix composites’, Mater. Lett., 2009, 63, 2029–2031.
- H. L. Wang, X. G. Zhou and J. S. Yu: ‘Fabrication of SiCf/SiC composites by chemical vapor infiltration and vapor silicon infiltration’, Mater. Lett., 2010, 64, 1691–1693.
- J. S. Yu, X. G. Zhou and H. L. Wang: ‘2D Sic/SiC composite for flow channel insert (FCI) application’, Fusion Eng. Des., 2010, 85, 1693–1696.
- G. W. He, T. Shibayama and H. Takahashi: ‘Microstructural evolution of Hi-Nicalon (TM) SiC fibre annealed and crept in various oxygen partial pressure atmospheres’, J. Mater. Sci., 2000, 35, 1153–1164.
- R. Qian, A. O. Yao, X. Y. Tang and Y. F. Wang: ‘Fracture mechanism of Hi-Nicalon SiC fibers annealed at high temperature’, Heat Treat. Met., 2007, 32, 55–58.
- J. J. Sha, T. Hinoki and A. Kohyama: ‘Microstructural characterization and fracture properties of SiC-based fibers annealed at elevated temperatures’, J. Mater. Sci., 2007, 42, 5046–5056.
- S. Li, Z. Feng, H. Mei and L. Zhang: ‘Mechanical and microstructural evolution of Hi-Nicalon trade mark SiC fibers annealed in O2-H2O-Ar atmospheres’, Mater. Sci. Eng. A, 2008, 487, (1–2), 424–430.
- J. J. Sha, T. Hinoki and A. Kohyama: ‘Thermal and mechanical stabilities of Hi-Nicalon SiC fiber under annealing and creep in various oxygen partial pressures’, Corros. Sci., 2008, 50, 3132–3138.
- R. Q. Yao, Y. Y. Wang and Z. D. Feng: ‘The effect of high-temperature annealing on tensile strength and its mechanism of Hi-Nicalon SiC fibres under inert atmosphere’, Fatigue Fract. Eng. Mater. Struct., 2008, 31, 777–787.
- W. Hu: ‘The study of structure and performance of polycarbosilane fractions’, Master's thesis, National University of Defense Technology, 2006.
- Y. Zhao: ‘The study of structure of polycarbosilane’, Master's thesis, National University of Defense Technology, 2005.
- X. Lan, Y. Wang and H. J. Xue: ‘Weibull analysis of the silicon carbon fiber mechanics performance’, Proceedings of the 13th International Conference for Composite Materials, Chengdu, China, 2004, 296–300.
- C. Zheng, B. Zhu, X. Li and Y. Wang: ‘Study on termal-curing of polycarbosilane fibers’, Acta Polym. Sin., 2004, 246–250.
- X. Chen, J. Xiao, Z. Xie and Y. Song: ‘Research on curing of polycarbosilane fiber and preparation of SiC fiber’, J. Mater. Eng., 2004, 29–32.
- T. Mah, N. L. Hecht, D. E. Mccullum, et al.: ‘Thermal stability of SiC fibres(Nicalon R)’, J. Mater. Sci., 1984, 19, 1191–1201.
- T. Shimoo, K. Okamura, I. Tsukada and T. Seguchi: ‘Thermal stability of low-oxygen SiC fibers fired under different conditions’, J. Mater. Sci., 1999, 34, 5623–5631.
- T. Shimoo, K. Okamura and H. Takeuchi: ‘Effect of reduced pressure on oxidation and thermal stability of polycarbosilane-derived SiC fibers’, J. Mater. Sci., 2003, 38, 4973–4979.
- B. Schneider, A. Guette and R. Naslain: ‘A theoretical and experimental approach to the active-to-passive transition in the oxidation of silicon carbide - experiments at high temperatures and low total pressures’, J. Mater. Sci., 1998, 33, 535–547.
- T. Shimoo, Y. Morisada and K. Okamura: ‘Oxidation behavior of Si-M-C-O fibers under wide range of oxygen partial pressures’, J. Mater. Sci., 2002, 37, 4361–4368.
- A. R. Bunsell and A. Piant: ‘A review of the development of three generations of small diameter silicon carbide fibres’, J. Mater. Sci., 2006, 41, 823–839.
- C. Shao, Y. Zhu, X. Shang and H. Wang: ‘High temperature resistant SiC fibres derived from novel boron containing polycarbosilane’, Mater. Res. Innov., 2014, 18, 892–895.
- Y. D. Wang, Y. C. Song and Y. Q. Li: ‘Effect of composition and structure on specific resistivity of SiC fibers’, Trans. Nonferrous Met. Soc. China, 2012, 22, 1133–1139.