References
- Sarkar S. and Das P. K.: ‘Microstructure and physicomechanical properties of pressureless sintered multiwalled carbon nanotube/alumina nanocomposites’, Ceram. Int., 2012, 38, (1), 423–432.
- Nakao W., Ono M., Lee S.-K., Takahashi K. and Ando K.: ‘Critical crack-healing condition for SiC whisker reinforced alumina under stress’, J. Eur. Ceram. Soc., 2005, 25, (16), 3649–3655.
- Laarz E., Carlsson M., Vivien B., Johansson M., Nygren M. and Bergström L.: ‘Colloidal processing of Al2O3-based composites reinforced with TiN and TiC particulates, whiskers and nanoparticles’, J. Eur. Ceram. Soc., 2001, 21, (8), 1027–1035.
- Zhang B. and Boey F.: ‘The phases and the toughening mechanisms in (Y) ZrO2–Al2O3–(Ti, W) C ceramics system’, Mater. Lett., 2000, 43, (4), 197–202.
- Bae S. I. and Baik S.: ‘Critical concentration of MgO for the prevention of abnormal grain growth in alumina’, J. Am. Ceram. Soc., 1994, 77, (10), 2499–2504.
- Johnson W. C. and Coble R. L.: ‘A test of the second phase and impurity segregation models for magnesia enhanced densification of sintered alumina’, J. Am. Ceram. Soc., 1978, 61, 110–114.
- Bennison S. J. and Harmer M. P.: ‘Effect of MgO solute on the kinetics of grain growth in Al2O3’, J. Am. Ceram. Soc., 1983, 66, (5), C90–C92.
- Berry K. A. and Harmer M. P.: ‘Effect of MgO solute on microstructure development in Al2O3’, J. Am. Ceram. Soc., 1986, 69, (2), 143–149.
- Bennison S. J. and Harmer M. P.: ‘Effect of magnesia solute on surface diffusion in sapphire and the role of magnesia in the sintering of alumina’, J. Am. Ceram. Soc., 1990, 73, (4), 833–837.
- Baik S. and Moon J. H.: ‘Effect of magnesium oxide on grain-boundary segregation of calcium during sintering of alumina’, J. Am. Ceram. Soc., 1991, 74, (4), 819–822.
- Jayaseelan D., Nishikawa T., Awaji H. and Gnanam F. D.: ‘Pressureless sintering of sol–gel derived alumina–zirconia composites’, Mater. Sci. Eng. A, 1998, A256, (1–2), 265–270.
- Sun L., Liu C., Zhang X., Wang B. and Ni X.: ‘Effect of diopside addition on sintering and mechanical properties of alumina’, Ceram. Int., 2009, 35, (4), 1321–1325.
- Chen R. Z. and Tuan W. H.: ‘Pressureless sintering of Al2O3/Ni nanocomposites’, J. Eur. Ceram. Soc., 1999, 19, (4), 463–468.
- Quirmbach P., Wolf M., Brook R. J. and Hennicke H.-W.: ‘Development of microstructure during pressureless sintering of alumina’, J. Eur. Ceram. Soc., 1992, 10, (1), 51–57.
- Singh V. K.: ‘Densification of alumina and silica in the presence of a liquid phase’, J. Am. Ceram. Soc., 1981, 64, (10), 133–136.
- Kingery W. D.: ‘Densification during sintering in the presence of a liquid phase. I. Theory’, J. Appl. Phys., 1959, 30, (3), 301–306.
- Lange R. G., Munir Z. A. and Holt J. B.: ‘Sintering kinetics of pure and doped boron carbide’, Mater. Sci. Res., 1980, 13, 311–320.
- Shiju G.: ‘Powder sintering theory’; 1998, Beijing, Metallurgical Industry Press.
- German R. M., Farooq S. and Kipphut C. M.: ‘Kinetics of liquid sintering’, Mater. Sci. Eng., 1988, 105–106, (1), 215–224.