Advanced search
Publication Cover
Energy Materials
Materials Science and Engineering for Energy Systems
Volume 8, 2013 - Issue 3: Materials and structural assessment under high temperature creep and fatigue
Journal homepage
81
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Application of linear matching method to creep–fatigue failure analysis of cruciform weldment manufactured of austenitic steel AISI type 316N(L)

Y. GorashDepartment of Mechanical & Aerospace EngineeringUniversity of Strathclyde, James Weir Building, 75 Montrose Street, GlasgowG11XJ, UKCorrespondence[email protected]
&
H. ChenDepartment of Mechanical & Aerospace EngineeringUniversity of Strathclyde, James Weir Building, 75 Montrose Street, GlasgowG11XJ, UK
Pages 337-343 | Received 04 Feb 2013, Accepted 10 May 2013, Published online: 22 Oct 2013

References

  • ChenH. F. ChenW. UreJ. : ‘A direct method on the evaluation of cyclic behaviour with creep effect’, Proc. ASME Pressure Vessels & Piping Conf. (PVP2012-78065), Toronto, Ont., Canada, July 2012, ASME, 1–9.
  • BrethertonI. KnowlesG. HayesJ.-P. BateS. K. AustinC. J. : ‘PC/AGR/5087: final report on the fatigue and creep–fatigue behaviour of welded cruciform joints’, Report for British Energy Generation Ltd no. RJCB/RD01186/R01, Serco Assurance, Warrington, UK, 2004.
  • GorashY. ChenH. F. : ‘Creep–fatigue life assessment of cruciform weldments using the linear matching method’, Int. J. Pres. Ves. Pip., 2013, 104, 1–13.
  • PonterA. R. S. ChenH. F. : ‘Modeling of the behavior of a welded joint subjected to reverse bending moment at high temperature’, J. Pres. Ves. Technol., 2007, 129, (2), 254–261.
  • AinsworthR. A. : ‘R5: an assessment procedure for the high temperature response of structures. Procedure R5: Issue 3. British Energy Generation Ltd, Gloucester, UK, 2003 (see also R. A. Ainsworth: ‘R5 procedures for assessing structural integrity of components under creep and creep–fatigue conditions’, Int. Mater. Rev., 2006, 51, 107–126).
  • BateS. K. HayesJ.-P. HootonD. G. SmithN. G. : ‘Further analyses to validate the R5 volume 2/3 procedure for the assessment of austenitic weldments’, Report for British Energy Generation Ltd no. SA/EIG/11890/R002, Serco Assurance, Warrington, UK, 2005.
  • National Institute for Materials Science, NIMS Creep Data Sheet No. 45A, Tsukuba, Japan, 2005.
  • ChenH. F. : ‘Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress’, J. Pres. Ves. Technol., 2010, 132, (1), 011202:1–011202:8.
  • WadaY. AotoK. UenoF. : ‘Creep–fatigue evaluation method for type 304 and 316FR SS’, ‘Creep–fatigue damage rules for advanced fast reactor design’, 75–86; 1997, Vienna, IAEA.
  • SkeltonR. P. GandyD. : ‘Creep–fatigue damage accumulation and interaction diagram based on metallographic interpretation of mechanisms’, Mater. High Temp., 2008, 25, (1), 27–54.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.