References
- ChenH. F. ChenW. UreJ. : ‘A direct method on the evaluation of cyclic behaviour with creep effect’, Proc. ASME Pressure Vessels & Piping Conf. (PVP2012-78065), Toronto, Ont., Canada, July 2012, ASME, 1–9.
- BrethertonI. KnowlesG. HayesJ.-P. BateS. K. AustinC. J. : ‘PC/AGR/5087: final report on the fatigue and creep–fatigue behaviour of welded cruciform joints’, Report for British Energy Generation Ltd no. RJCB/RD01186/R01, Serco Assurance, Warrington, UK, 2004.
- GorashY. ChenH. F. : ‘Creep–fatigue life assessment of cruciform weldments using the linear matching method’, Int. J. Pres. Ves. Pip., 2013, 104, 1–13.
- PonterA. R. S. ChenH. F. : ‘Modeling of the behavior of a welded joint subjected to reverse bending moment at high temperature’, J. Pres. Ves. Technol., 2007, 129, (2), 254–261.
- AinsworthR. A. : ‘R5: an assessment procedure for the high temperature response of structures. Procedure R5: Issue 3. British Energy Generation Ltd, Gloucester, UK, 2003 (see also R. A. Ainsworth: ‘R5 procedures for assessing structural integrity of components under creep and creep–fatigue conditions’, Int. Mater. Rev., 2006, 51, 107–126).
- BateS. K. HayesJ.-P. HootonD. G. SmithN. G. : ‘Further analyses to validate the R5 volume 2/3 procedure for the assessment of austenitic weldments’, Report for British Energy Generation Ltd no. SA/EIG/11890/R002, Serco Assurance, Warrington, UK, 2005.
- National Institute for Materials Science, NIMS Creep Data Sheet No. 45A, Tsukuba, Japan, 2005.
- ChenH. F. : ‘Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress’, J. Pres. Ves. Technol., 2010, 132, (1), 011202:1–011202:8.
- WadaY. AotoK. UenoF. : ‘Creep–fatigue evaluation method for type 304 and 316FR SS’, ‘Creep–fatigue damage rules for advanced fast reactor design’, 75–86; 1997, Vienna, IAEA.
- SkeltonR. P. GandyD. : ‘Creep–fatigue damage accumulation and interaction diagram based on metallographic interpretation of mechanisms’, Mater. High Temp., 2008, 25, (1), 27–54.