References
- Abizadeh N, Moles DR, O'Neill J and Noar J. Digital versus plaster study models: how accurate and reproducible are they? J Orthod 2012; 39: 151–159. doi: 10.1179/1465312512Z.00000000023
- Adolphs N, Liu W, Keeve E and Hoffmeister B. RapidSplint: virtual splint generation for orthognathic surgery – results of a pilot series. Comput Aided Surg 2014; 19: 1–3. doi: 10.3109/10929088.2014.887778
- Asquith J, Gillgrass T and Mossey P. Three-dimensional imaging of orthodontic models: a pilot study. Eur J Orthod 2007; 29: 517–522. doi: 10.1093/ejo/cjm044
- Bell A, Ayoub AF and Siebert P. Assessment of the accuracy of a three-dimensional imaging system for archiving dental study models. J Orthod 2003; 30: 219–223. doi: 10.1093/ortho/30.3.219
- Dalstra M and Melsen B. From alginate impressions to digital virtual models: accuracy and reproducibility. J Orthod 2009; 36: 36–41. doi: 10.1179/14653120722905
- Hazeveld A, Huddleston Slater JJ and Ren Y. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques. Am J Orthod Dentofacial Orthop 2014; 145: 108–115. doi: 10.1016/j.ajodo.2013.05.011
- Ibrahim D, Broilo TL, Heitz C, de Oliveira MG, de Oliveira HW, Nobre SM, et al. Dimensional error of selective laser sintering, three-dimensional printing and PolyJet models in the reproduction of mandibular anatomy. J Craniomaxillofac Surg 2009; 37: 167–173. doi: 10.1016/j.jcms.2008.10.008
- Ionita CN, Mokin M, Varble N, Bednarek DR, Xiang J, Snyder KV, et al. Challenges and limitations of patient-specific vascular phantom fabrication using 3D Polyjet printing. Proc Soc Photo Opt Instrum Eng 2014; 9038: 90380M.
- Keating AP, Knox J, Bibb R and Zhurov AI. A comparison of plaster, digital and reconstructed study model accuracy. J Orthod 2008; 35: 191–201. doi: 10.1179/146531207225022626
- Lim MY and Lim S. Comparison of model analysis measurements among plaster model, laser scan digital model and cone beam CT image. Korean J Orthod 2009; 39: 6–17. doi: 10.4041/kjod.2009.39.1.6
- Murugesan K, Anandapandian PA, Sharma SK and Vasantha Kumar M. Comparative evaluation of dimension and surface detail accuracy of models produced by three different rapid prototype techniques. J Indian Prosthodont Soc 2012; 12: 16–20. doi: 10.1007/s13191-011-0103-8
- Quimby ML, Vig KWL, Rashid RG and Firestone AR. The accuracy and reliability of measurements made on computer–based digital models. Angle Orthod 2004; 74: 298–303.
- Salmi M, Paloheimo KS, Tuomi J, Wolff J and Mäkitie A. Accuracy of medical models made by additive manufacturing (rapid manufacturing). J Craniomaxillofac Surg 2013; 41: 603–609. doi: 10.1016/j.jcms.2012.11.041
- Santoro M, Galkin S, Teredesai M, Nicolay OF and Cangialosi TJ. Comparison of measurements made on digital and plaster models. Am J Orthod Dentofacial Orthop 2003; 124: 101–105. doi: 10.1016/S0889-5406(03)00152-5
- Stevens DR, Flores-Mir C, Nebbe B, Raboud DW, Heo G and Major PW. Validity, reliability and reproducibility of plaster vs digital study models: comparison of peer assessment rating and Bolton analysis and their constituent measurements. Am J Orthod Dentofacial Orthop 2006; 129: 794–803. doi: 10.1016/j.ajodo.2004.08.023
- Tomassette JJ, Taloumis LJ, Denny JM and Fischer Jr, JR. A comparison of 3 computerized Bolton tooth-size analyses with a commonly used method. Angle Orthod 2001; 71: 351–357.
- Watanabe-Kanno GA, Junior HM, Sanchez-Ayala A and Lagravere MO. Reproducibilty, reliability and validity of measurements obtained from Cecile3 digital models. Braz Oral Res 2009; 23: 288–295. doi: 10.1590/S1806-83242009000300011