Using sol–gel component as additive to foundry coatings to improve casting quality

References

• in ‘Metals handbook’, 9th edn, Vol. 15, ‘Casting’; 1998, Materials Park, OH, ASM International.
   Google Scholar
• Burns T A, (ed.): ‘The Foseco foundryman’s handbook’, 9th edn; 1989, Oxford, Pergamon Press.
   Google Scholar
• AFS: ‘Analysis of casting defects’; 2007, Schaumburg, IL, American Foundry Society.
   Google Scholar
• Campbell J: ‘Castings’; 1995, Oxford, Butterworth-Heinemann.
   Google Scholar
• Nwaogu UC, Poulsen T, Stage RK, Bischoff C, Tiedje NS: ‘New sol–gel refractory coatings on chemically-bonded sand cores for foundry applications to improve casting surface quality’, Surf. Coat. Technol., 2011, 205, 4035–4044.
   Web of Science ®Google Scholar
• Stefanescu D, Wills S, Massone J, Duncan F: ‘Quantification of casting skin in ductile and compacted graphite irons and its effect on tensile properties’, Int. J. Metalcast., 2008, 7–26.
   Web of Science ®Google Scholar
• Leach RK: ‘Fundamental principles of engineering nanometrology’; 2010, London, Elsevier.
   Google Scholar
• Asiltürk I, Cunkas M: ‘Modelling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method’, Expert Syst. Appl., 2011, 38, 5826–5832.
   Web of Science ®Google Scholar
• Larena A, Millan F, Verdu M, Pinto G: ‘Surface roughness characterisation of multilayer polymer films for graphitic arts applications’, Appl. Surf. Sci., 2001, 174, 217–224.
   Web of Science ®Google Scholar
• ‘BYK additives and instruments’. http://www.byk.com/physical-properties/viscosity-cups.html
   Google Scholar
• Montgomery DC: ‘Design and analysis of experiments’, 3rd edn; 1991, New York, John Wiley & Sons.
   Google Scholar
• Davaş Ö, Kayikci R: ‘Application of Taguchi’s methods to investigate some factors affecting microporosity formation in A360 aluminium alloy casting’, Mater. Des., 2007, 28, 2224–2228.
   Web of Science ®Google Scholar
• Kumar S, Kumar P, Shan HS: ‘Parametric optimization of surface roughness of castings produced by evaporative pattern casting process’, Mater. Lett., 2006, 60, 3048–3053.
   Web of Science ®Google Scholar
• Vijian P, Arunacalam VP: ‘Optimization of squeeze cast parameters of LM6 aluminium alloy for surface roughness using Taguchi method’, J. Mater. Process. Technol., 2006, 180, 161–166.
   Web of Science ®Google Scholar
• Alauddin M, El Baradie MA, Hashmi MSJ: ‘Computer aided analysis of a surface roughness model for end milling’, J. Mater. Process. Technol., 1995, 55, 123–127.
   Web of Science ®Google Scholar
• Cast TIP: ‘Controlling refractory coatings’, ‘Modern casting’, 2010. http://www.docstoc.com/docs/56025950/Controlling-refractory-coatings(CAST-TIP-Technical-Information-and-Practice).
   Google Scholar
• Winardi L, Griffin RD: ‘Effects of coating drying methods on LOI, gas evolution and core permeability’, AFS Transactions paper, AFS, Schaumburg, IL, USA, Vol. 08-047, 2008.
   Google Scholar
• Nwaogu UC, Poulsen T, Bischoff C, Tiedje NS: ‘Influence of new sol–gel refractory coating on the casting properties of cold box and Furan cores for grey cast iron’, Proc. 69th World Foundry Cong., Hangzhou, China, 648–653, October 2010, World Foundrymen Organization.
   Google Scholar
• Ramrattan SN, Joyce MK: ‘Final report – refractory coating control’. http://amc.aticorp.org/reports/wmu2009.pdf
   Google Scholar
• Wang Y, Cannon FS, Salama M, Goudzwaard J, Furness AJ: ‘Characterization of hydrocarbon emissions from green sand foundry core binders by analytical pyrolysis’, Environ. Sci. Technol., 2007, 41, 7922–7927.
   PubMed Web of Science ®Google Scholar
• Brooks BE, Beckermann C: ‘Prediction of burn-on and mold penetration in steel casting using simulation’, Proc. 60th SFSA Technical and Operating Conf., Chicago, IL, USA, December 2006, Steel Founders’ Society of America, Paper 5·3.
   Google Scholar
• Fusayama T, Yamane M: ‘Surface roughness of castings made by various casting techniques’, J. Prosthet. Dent., 1973, 29, (5), 529–535.
   PubMed Web of Science ®Google Scholar
• Parkes WB: ‘Clay-bonded foundry sand’; 1971, London, Applied Science Publishers.
   Google Scholar
• Kim S, Yim B, Park Y: ‘Application of Taguchi experimental design for the optimization of effective parameters on the rapeseed methyl ester production’, Environ. Eng. Res., 2010, 15, (3), 129–134.
   Google Scholar
• Kandananond K: ‘Characterization of FDB sleeves surface roughness using the Taguchi approach’, Eur. J. Sci. Res., 2009, 33, (2), 330–337.
   Google Scholar
• Mehat NM, Kamaruddin S: ‘Optimization of mechanical properties of recycled plastic products via optimal processing parameters using Taguchi method’, J. Mater. Process. Technol., 2011, 211, 1989–1994.
   Web of Science ®Google Scholar
• Altan M: ‘Reducing shrinkage in injection moldings via Taguchi, ANOVA and neural network methods’, Mater. Des., 2010, 31, 599–604.
   Web of Science ®Google Scholar
• Whitehouse DJ: ‘Handbook of surface metrology’; 1994, London, IOP Publishing.
   Google Scholar