References
- Sedriks AJ: ‘Corrosion of stainless steels’, 113–115; 1979, New York, Wiley.
- Simmons JW: ‘Overview: high-nitrogen alloying of stainless steels’, Mater. Sci. Eng. A, 1996, A207, 159–169.
- Gavriljuk VG: ‘Nitrogen in iron and steel’, ISIJ Int., 1996, 36, 738–745.
- Simmons JW: ‘Mechanical properties of isothermally aged high-nitrogen stainless steel’, Metall. Mater. Trans. A, 1995, 26A, 2579–2595.
- Ningshen S and Mudali UK: ‘Pitting and intergranular corrosion resistance of AISI Type 301LN stainless steels’, J. Mater. Eng. Perform., 2010, 19, 274–281.
- Ryan MP, Williams DE, Chater RJ, Hutton BM and McPhail DS: ‘Why stainless steel corrodes’, Nature, 2002, 145, 770–774.
- Frankel GS: ‘Pitting corrosion of metals: a review of the critical factors’, J. Electrochem. Soc., 1998, 145, 2186–2198.
- Magnabosco R and Alonso-Falleiros N: ‘Pit morphology and its relation to microstructure of 850°C aged duplex stainless steel’, Corrosion, 2005, 61, 130–136.
- Bhattacharya A and Singh PM: ‘Role of microstructure on the corrosion susceptibility of UNS S32101 duplex stainless steel’, Corrosion, 2008, 64, 532–540.
- Sedriks AJ: ‘Plenary Lecture–1986: Effects of alloy composition and microstructure on the passivity of stainless steels’, Corrosion, 1986, 42, 376–389.
- Stewart J and Williams DE: ‘The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions’, Corros. Sci., 1992, 33, 457–474.
- Patchett BM and Bringas J: ‘The metals blue book, filler metals’; 1998, Edmonton, CASTI Publishing Inc., American Welding Society (AWS).
- Davis JR: ‘Corrosion of weldments’; 2006, Materials Park, OH, ASM International.
- Flowers JW, Beck FH and Fontana MG: ‘Corrosion and age hardening studies of some cast stainless alloys containing ferrite’, Corrosion, 1963, 19, 186t–198t.
- Gunn RN: ‘Duplex stainless steels: microstructure, properties and applications’, 175; 1997, Cambridge, Abington.
- Anita T, Shaikh H, Khatak HS and Amarendra G: ‘Effect of heat input on the stress corrosion cracking behavior of weld metal of nitrogen-added AISI type 316 stainless steel’, Corrosion, 2004, 60, 873–880.
- Garfias-Mesias LF, Sykes JM and Tuck CDS: ‘The effect of phase compositions on the pitting corrosion of 25 Cr duplex stainless steel in chloride solutions’, Corros. Sci., 1996, 38, 1319–1330.
- Yang Y, Tan H, Zhang Z, Wang Z, Jiang Y, Jiang L and Li J: ‘Effect of annealing temperature on the pitting corrosion behavior of UNS S82441 duplex stainless steel’, Corrosion, 2013, 69, 167–173.
- Merello R, Botana FJ, Botella J and Marcos M: ‘Determination of the weaker phase in the pitting corrosion of non-standard low-Ni high-Mn-N duplex stainless steels’, Mater. Corros., 2004, 55, 95–101.
- Gill TPS, Kamachi Mudali U, Seetharaman V and Gnanamoorthy JB: ‘Effect of heat input and microstructure on pitting corrosion in AISI 316L submerged arc welds’, Corrosion, 1988, 44, 511–516.
- Lu BT, Chen ZK, Luo JL, Patchett BM and Xu ZH: ‘Pitting and stress corrosion cracking behavior in welded austenitic stainless steel’, Electrochim. Acta, 2005, 50, 1391–1403.
- Pujar MG, Dayal RK, Gill TPS and Malhotra SN: ‘Role of delta-ferrite in the dissolution of passive films on the austenitic stainless-steel weld metals’, J. Mater. Sci. Lett., 1999, 18, 823–826.
- Grekula AI, Kujanpaa VP and Karjalainen LP: ‘Effect of solidification mode and impurities on pitting corrosion in AISI 316 GTA welds’, Corrosion, 1984, 40, 569–572.
- Kamachi Mudali U, Dayal RK, Gill TPS and Gnanamoorthy JB: ‘Pitting corrosion resistance of nitrogen-added type 304 stainless steel weld metal with different heat inputs’, Corrosion, 1990, 46, 454–460.
- Hronsky P and Duquette DJ: ‘Pitting behavior of duplex 308L stainless steel in methanol/water/HCl solutions’, Corrosion, 1982, 38, 63–69.
- Garcia C, Martin F, de Tiedra P, Blanco Y and Lopez M: ‘Pitting corrosion of welded joints of austenitic stainless steels studied by using an electrochemical minicell’, Corros. Sci., 2008, 50, 1184–1194.
- Chen L, Tan H, Wang Z, Li J and Jiang Y: ‘Influence of cooling rate on microstructure evolution and pitting corrosion resistance in the simulated heat-affected zone of 2304 duplex stainless steels’, Corros. Sci., 2012, 58, 168–174.
- Sourmail T: ‘Precipitation in creep resistant austenitic stainless steels’, Mater. Sci. Technol., 2001, 17, 1–14.
- Kordatos JD, Fourlaris G and Papadimitriou G: ‘The effect of cooling rate on the mechanical and corrosion properties of SAF 2205 (UNS 31803) duplex stainless steel welds’, Scr. Mater., 2001, 44, 401–408.
- Pujar MG, Kamachi Mudali U, Dayal RK and Gill TPS: ‘Susceptibility of as-welded and thermally aged type 316LN weldments toward pitting and intergranular corrosion’, Corrosion, 1992, 48, 579–586.
- Sriram R and Tromans D: ‘Pitting corrosion of duplex stainless steels’, Corrosion, 1989, 45, 804–810.
- Boucherit N, Hugot-Le Goff A and Joiret S: ‘Influence of Ni, Mo, and Cr on pitting corrosionof steels studied by Raman spectroscopy’, Corrosion, 1992, 48, 569–579.
- Bautista A, Alvarez SM and Velasco F: ‘Selective corrosion of duplex stainless steel bars in acid. Part 1: Effect of the composition, microstructure and anodic polarizations’, Mater. Corros., 2013, 64.
- Schino AD and Kenny JM: ‘Effect of grain size on the corrosion resistance of a high nitrogen-low nickel austenitic stainless steel’, J. Mater. Sci. Lett., 2002, 21, 1969–1971.
- Schino AD and Kenny JM: ‘Effects of the grain size on the corrosion behavior of refined AISI 304 austenitic stainless steels’, J. Mater. Sci. Lett., 2002, 21, 1631–1634.
- Manning PE, Lyman CE and Duquette DJ: ‘A STEM examination of the localized corrosion behavior of a duplex stainless steel’, Corrosion, 1980, 36, 246–251.
- Li WS, Cui N and Luo JL: ‘Pitting initiation and propagation of hypoeutectoid iron-based alloy with inclusions of martensite in chloride-containing nitrite solutions’, Electrochim. Acta, 2004, 49, 1663–1672.
- Olsson COA and Landolt D: ‘Passive films on stainless steels – chemistry, structure and growth’, Electrochim. Acta, 2003, 48, 1093–1104.
- Olefjord I and Elfstrom B: ‘The composition of the surface during passivation of stainless steels’, Corrosion, 1982, 38, 46–52.
- Horvatha J and Uhlig HH: ‘Critical potential for pitting corrosion of Ni, Cr–Ni, Cr–Fe, and related stainless steels’, J. Electrochem. Soc., 1968, 115, 791–795.
- Pardo A, Merino MC, Coy AE, Viejo F, Arrabal R and Matykina E: ‘Pitting corrosion behaviour of austenitic stainless steels – combining effects of Mn and Mo additions’, Corros. Sci., 2008, 50, 1796–1806.
- Atamert S and King JE: ‘Elemental partitioning and microstructural development in duplex stainless steel weld metal’, Acta Metall. Mater., 1991, 39, 273–285.
- Kim YJ, Ugurlu O, Jiang C, Gleeson B and Chumbley LS: ‘Microstructural evolution of secondary phases in the cast duplex stainless steels CD3MN and CD3MWCuN’, Metall. Mater. Trans. A, 2007, 38A, 203–211.
- Wang YQ, Yang B, Han J, Wu HC and Wang XT: ‘Effect of precipitated phases on the pitting corrosion of Z3CN20·09M cast duplex stainless steel’, Mater. Trans., 2013, 54, 839–843.
- Hubschmid C, Mathieu HJ and Landolt D: ‘Passive film composition and pitting behaviour of Fe–25Cr–11Nb studied by scanning Auger microscopy’, Surf. Interface Anal., 1993, 20, 755–760.