337
Views
52
CrossRef citations to date
0
Altmetric
Research Articles

Computational Modelling of Fracture in Polycrystalline Materials

Pages 99-125 | Published online: 18 Jul 2013

REFERENCES

  • S. Hill: Mater. World, June 1996, 334.
  • A. A. Griffiths: Philos. Trans. R Soc. (Lond.) A, 1921, 221, 163.
  • A. A. Griffiths: Proc. 1st Int. Congress on ‘Applied mechanics’, Delft, 1924, 55.
  • A. Kelly and N. H. MacMillan: ‘Strong solids’: 1986, Oxford, Clarendon Press.
  • C. S. Barrett and T. B. Massalski: ‘Structure of metals’: 1966, New York, McGraw-Hill.
  • G. R. Irwin: J. AppL Mech. , 1957, 24, 56.
  • G. R. Irwin: Proc. 9th. Int. Conf. on ‘Applied mechanics’, Brussels, 1956, 245.
  • A. R. Dowling and P. E. J. Flewitt: in ‘Methods for the assessment of the structural integrity of components and structures’, (ed. D. Lidbury and P. Hirsch), 1; 2003, London, Maney.
  • ‘Assessment of the integrity of structures containing defects’, R 6, Rev. 4; 2001, British Energy Generation Ltd.
  • W. Doll: in `Fractography and failure mechanisms of polymers and composites', (ed. A. C. Roulin-Moloney), 387; 1989, London, Applied Science.
  • R. Moskovic and P. E. J. Flewitt: Metall. Mater. Trans. , 1997, 28A, 2609.
  • A. S. Balankin: Eng. Fract. Mech. , 1997, 57, 135.
  • A. Kelly, W. R. Tyson and A. H. Cottrell: Philos. Mag. , 1967, 15, 567.
  • R. Rice and R. Thomson: Philos. Mag. , 1974, 29, 73.
  • A. S. Argon: J. Eng. Mater. Technot, 2001, 123, 1.
  • F. E. Bruesch, K. Frye and T. Muller: in ‘Fracture mechanics of ceramics’, (ed. R. C. Bradt et al), Vol. 5, 591; 1983, New York, Plenum.
  • M. F. Ashby and B. Tomkins: in Proc. 3rd Int. Conf. on ‘Mechanical behaviour of materials’, (ed. K. J. Miller and R. F. Smith), Vol. 1, 47; 1979, Oxford, Pergamon.
  • J. F. Knott: in Proc. 7th. Int. Conf. on Fracture, ‘Advances in fracture research’ (ed. K. Salama), 125; 1989, Oxford, Pergamon.
  • H. G. F. Wilsdorf: Mater. Set Eng. , 1983, 59, 1.
  • W. M. Garrison and N. R. Moody: J. Phys. Chem. Solids, 1987, 48, 1035.
  • N. Narita and Y. Takahara: Philos. Mag. , 2002, 82, 3229.
  • P. B. Hirsch, S. G. Roberts and J. Samuels: Proc. R Soc. (Lond.) A, 1989, 421, 25.
  • R. N. Katz: in Proc. 3rd Int. Conf. on ‘Mechanical behaviour of materials’, (ed. K. J. Miller and R. F. Smith), Vol. 1, 257; 1979, Oxford, Pergamon.
  • A. H. Cottrell: Mater. Set Technol. , 1989, 5, 1165.
  • A. H. Cottrell: Mater. Set Technot, 1990, 6, 974.
  • J. F. Knott: ‘Fundamentals of fracture mechanics’; 1973, London, Butterworths.
  • A. H. Cottrell: Trans. ASME, 1958, 212, 192.
  • D. Hull: in ‘Fracture of solids’, (ed. D. C. Drucker and J. J. Gilman), 417; 1963, New York, Gordon & Breach.
  • C. J. McMahon and M. Cohen: Acta Metall., 1965, 13, 591.
  • E. Smith: in Proc. Conf. on ‘Physical basis of fracture’, 31; 1966, London, Institute of Physics.
  • P. G. Shewmon: Mater. Metall. Trans. , 1998, 29A, 1535.
  • D. Y. Lee, E. V. Barrera, W. P. Stark and H. L. Marcus: Metall. Trans. , 1984, 15A, 1415.
  • P. J. Komeda and C. J. McMahon: Metall. Trans. , 1981, 12A, 31.
  • P. E. J. Flewitt and R. K. Wild: ‘Grain boundaries; their microstructures and chemistry’, 159; 2002, Chichester, UK, Wiley.
  • D. McLean: ‘Grain boundaries in metals’: 1954, Oxford, Clarendon Press.
  • M. P. Seah and E. D. Hondros: Proc. R. Soc. (Lond.) A, 1973, 335, 191.
  • M. P. Seah and E. D. Hondros: Int. Met. Rev. , 1977, 222, 262.
  • J. Caband and F. Cabanè: in ‘Segregation and related processes in materials’, (ed. J. Nowotny), 1-150; 1991, Switzerland, Trans. Tech. Publications.
  • P. Lejcek and S. Hoffman: Central Rev. Solid State Mater. Sci. , 1995, 20, 1.
  • X. Tingdong and C. Buyuan: Prog. Mater. Sci. , 2004, 49, 109.
  • T. R. Anthony: Acta Metall., 1969, 17, 603.
  • P. Doig and P. E. J. Flewitt: Acta Metall., 1981, 29, 1831.
  • A. B. Lidiard: Philos. Mag. , 1999, A79, 1493.0.
  • R. G. Faulkner, S. H. Song, P. E. J. Flewitt, M. Victoria and P. Marmy: J. Nucl. Mater. , 1998, 255, 189.
  • S. H. Song, R. G. Faulkner, P. E. J. Flewitt, P. Marmy and M. Victoria: Mater. Set Eng. , 2000, A286, 230.
  • S. P. Lynch and B. C. Muddle: Philos. Mag. , 2002, A82, 3361.
  • R. O. Ritchie, J. F. Knott and J. R. Rice: J. Mech. Phys. Solids, 1973, 21, 395.
  • I. Milne and D. A. Curry: ASTM STP, 1983, 803-11-278-11, 290.
  • J. R. Rice and M. A. Johnson: in ‘Elastic behaviour of solids’, (ed. M. F. Kanninen et al.), 641; 1970, New York, McGraw-Hill.
  • R. M. McMeeking: J. Mech. Phys. Solids, 1977, 25, 357.
  • D. M. Tracy: J. Eng. Mater. Technot, 1976, 98, 146.
  • J. R. Rice and D. M. Tracy: J. Mech. Phys. Solids, 1969, 17, 201.
  • R. O. Ritchie and R. Thompson: Metall. Trans. A, 1985, 16A, 233.
  • D. A. Curry and J. F. Knott: Met. Set, 1979, 13, 341.
  • N. N. Davidenkov: ‘Problems of impact in materials science’; 1938, Moscow, USSR Acad. Sci.
  • N. N. Davidenkov: ‘Dynamic strength and brittleness in materials’, Vol. 1; 1981, Kiev, Nancowa Dumka.
  • E. Hondros and D. McLean: Philos. Mag. , 1974, 29, 271.
  • M. F. Ashby: Mater. Set Technol, 1992, 8, 102.
  • N. M. Ghoniem, E. P. Busso, N. Kioussis and H. Huang: Philos. Mag. , 2003, A83, 3475.
  • E. Orowan: Weld. Res. Suppl. , 1955, 34, 157.
  • G. R. Irwin: J. Appl. Mech. , 1956, 24, 361.
  • O. C. Zienkiewicz: ‘Finite element analysis in structural and continuum mechanics’; 1971, New York/London, McGraw Hill.
  • R. H. Gallagher: ‘Finite element analysis: fundamentals’; 1974, Englewood Cliffs, NJ, Prentice Hall.
  • F. A. Leckie and D. R. Hayhurst: Acta Metall, 1977, 25, 1059.
  • E. Johnson: Int. J. Fract. , 1992, 55, 47.
  • E. Johnson: Int. J. Fract. , 1993, 61, 183.
  • X. P. Xu and A. Needleman: J. Mech. Phys. Solids, 1994, 42, 1397.
  • R. Moskovic, N. P. O'Dowd, M. Priest and P. E. J. Flewitt: Key Eng. Mater. , 2003, 251-2, 41.
  • V. Tvergaard: Int. J. Fract. , 1982, 18, 237.
  • A. L. Gurson: J. Eng. Mater. Technol. , 1977, 99, 2.
  • J. H. Beynon, S. Das, I. C. Howard and A. Shterenlikht: in ‘New and emerging computational methods: applications to fracture damage and reliability’, PVP VSL 408, (ed. F. W. Bust), 229; 2002, New York, Am. Soc. Mech. Eng.
  • J. von Neuman: ‘Theory of self reproducing automata’, (ed. W. Bourks); 1966, Urbana, IL, University of Illinois.
  • S. J. Wu, C. L. Davis, A. Shterenlikht and I. C. Howard: Metall. Mater. Trans. A, to be published.
  • L. C. Lim and T. Watanabe: Acta Metall Mater., 1990, 38, 2507.
  • T. L. Anderson, D. Stienstra and R. H. Dodds: ‘Fracture mechanics’, ASTM-STP 1207, 24 (ed. J. D. Landes et al), 186; 1994, Philadelphia, PA, ASTM.
  • F. A. McClintock: ‘George Irwin symposium on cleavage fracture’, (ed. K. S. Chan), 81; 1997, Warrendale, PA, TMS.
  • Y. Qiao and A. S. Argon: Mech. Mater. , 2003, 35, 129.
  • V. Vitek and D. J. Srolovitz: ‘Atomic simulation of materials’; 1989, New York, Plenum.
  • P. Gumbsch: Mater. Set Eng. A, 1999, 260, 72.
  • D. Uder and D. N. Seidman: Acta Metall Mater., 1994, 42, 1959.
  • S. Pafka, J. Cserti and G. Tichy: Modell. Simul Mater. Set Eng. , 1998, 6, 507.
  • D. C. Rapaport: ‘The art of computer simulation’; 1995, London, Cambridge University Press.
  • M. W. Finnis and J. F. Sinclair: Philos. Mag. , 1984, A50, 45.
  • R. Car and M. Parrinello: Phys. Rev. Lett. , 1985, 55, 2471.
  • O. N. Mryasov and A. J. Freeman: Mater. Set Eng. , 1999, A260, 80.
  • V. Heine: ‘Solid state physics’, (ed. H. Ehrenreich), 24, 1; 1970, New York, Academic Press.
  • F. F. Abraham, D. Broidbeck, R. A. Rafey and W. E. Rudge: Phys. Rev. Lett. , 1994, 73, 272.
  • B. L. Holran and R. Ravelo: Phys. Rev. , 1995, B51, 1275.
  • S. J. Zhou, P. S. Lomdahl, R. Thomson and B. L. Holian: Phys. Rev. Lett. , 1996, 76, 2318.
  • A. Omeltchenko, J. Yo, R. K. Kalia and P. Vashishka: Phys. Rev. Lett. , 1997, 78, 2148.
  • P. Gumbsch, S. L. Zhou and B. L. Holian: Phys. Rev. , 1997, B55, 3445.
  • A. Machova and G. J. Ackland: Modell. Simul Mater. Set Eng. , 1998, 6, 521.
  • G. J. Ackland, D. J. Bacon, A. F. Calder and T. Harry: Philos. Mag. , 1997, A75, 713.
  • V. Vitek: Crystal Lattice Defects, 1974, 5, 1.
  • I. H. Lin and R. Thomson: Acta Metall., 1986, 34, 187.
  • J. F. Knott: Atomistics of fracture' (ed. R. M. Latiniasen and J. R. Dickens), 209; 1983, New York, Plenum Press.
  • F. F. Abraham, D. Bradbeck, W. E. Rudge, J. Q. Broughton, D. Schneider, B. Land, D. Lifka, J. Genner, M. Rosenkrantz, J. Skovnia and H. Gao: Modell. Simul Mater. Set Eng. , 1998, 6, 639.
  • B. Lawn, B. Hockney and S. Wiederhoven: J. Mater. Set, 1980, 15, 1507.
  • Y. W. Zang and T. C. Wang: Mater. Set Eng. , 1996, 4, 231.
  • A. Crocker and G. Smith: Proc. 7th Int. Conf. on Intergranular and interphase boundaries', (ed. A. Ferro et al), 593; 1996, Zurich, Austria, Transtec.
  • G. E. Smith, A. G. Crocker, R. Moskovic and P. E. J. Flewitt: Philos. Mag. , 2002, A82, 3443.
  • G. Smith, P. Flewitt, A. Crocker and R. Moskovic: Proc. Int. Conf. on ‘Environmental degradation of engineering materials’, (ed. A. Zielinski et al), 146; 1999, Gdansk, Poland, Gdansk Scientific Society.
  • G. E. Smith, A. G. Crocker, P. E. J. Flewitt and R. Moskovic: ‘Damage and failure at interfaces’, (ed. H.-P. Rossmanith), 229; 1997, Rotterdam, Balkema.
  • G. E. Smith, A. G. Crocker, P. E. J. Flewitt and R. Moskovic: ‘Fracture mechanics beyond 2000’, (ed. A. Neimitz et al), Vol. 3, 325; 2002, Warley, UK, EMAS.
  • C. S. Smith: ‘Metal interfaces’, 65; 1952, Cleveland, ASM.
  • C. S. Smith: Acta Metall, 1953, 1, 244.
  • A. F. Wells: ‘Three-dimensional nets and polyhedra’, 193; 1977, New York, Wiley.
  • W. Thomson (Lord Kelvin): Philos. Mag. , 1887, 25, 503.
  • I. Ahmed: ‘An investigation of the morphology of grain growth in polycrystals’, PhD thesis, University of Surrey, UK, 1984.
  • P. J. Rinous, M. O. Tucker and A. G. Crocker: Proc. R. Soc. (Lond.) A, 1982, 382, 201.
  • D. Weaire and R. Phelan: Philos. Mag. Lett. , 1994, 69, 107.
  • G. E. Smith, A. G. Crocker, R. Moskovic and P. E. J. Flewitt: Proc ICSMA 13, Budapest 2003, Mater. Set Eng. A, 2004, A387—A389, 367.
  • A. G. Crocker, G. E. Smith, P. E. J. Flewitt and R. Moskovic: Mater. Set Forum, 1999, 294-296, 673.
  • G. Smith, A. Crocker, P. Flewitt and R. Moskovic: `ECF13: Fracture mechanics: applications and challenges', (ed. M. Fuentes et al), CD ROM; 2000, Amsterdam, Elsevier, ESIS.
  • G. Smith, A. Crocker, P. Flewitt and R. Moskovic: Mater. Set Technol, 2002, 18, 1329.
  • G. Smith, P. E. J. Flewitt, A. Crocker and R. Moskovic: ‘The lifetime of plant structures and components: evaluation, design, extension and management’, (ed. J. H. Edwards), 257; 2000, Warley, UK, EMAS.
  • A. G. Crocker, G. E. Smith, P. E. J. Flewitt and R. Moskovic: `ECF11: Mechanisms and mechanics of damage and failure', (ed. J. Petit), 233; 1996, Warley, UK, EMAS.
  • P. E. J. Flewitt, G. E. Smith, R. Moskovic and A. G. Crocker: `ECF12: Fracture from defects', (ed. M. W. Brown et al.), 975; 1998, Warley, UK, EMAS.
  • Y. Qiao and A. S. Argon: Mech. Mater. , 2003, 35, 313.
  • G. E. Smith, P. E. J. Flewitt and A. G. Crocker: to be published.
  • C. L. Briant: Acta Metall, 1987, 35, 149.
  • L. F. Exworthy, W. J. Little and P. E. J. Flewitt: Int. J. Pressure Vessels Piping, 2002, 79, 413.
  • R. Moskovic, I. J. Lingham, A. G. Crocker, G. E. Smith and P. E. J. Flewitt: Eng. Fract. Meek, 2004, 71, 587.
  • R. Moskovic, I. J. Lingham, A. G. Crocker, G. E. Smith and P. E. J. Flewitt: ‘Advances in fracture and damage mechanics’, (ed. M. Guagliano et al), 41; 2001, Geneva, Hoggar.
  • H. Rauh, C. A. Hippsley and R. Bullough: Acta Metall, 1989, 37, 269.
  • T. L. Anderson: ‘Fracture mechanics: fundamentals and applica-tions’; 1991, Boston, MA, CRC Press.
  • T. Pardon and Y. Brechet: Philos. Mag. , 2004, A84, 269.
  • J. W. Hancock: Met. Set, 1976, 10, 319.
  • M. Ortiz and R. Philips: Adv. Appl. Mech. , 1999, 36, 1.
  • R. Philips: ‘Crystal defects and microstructures; modelling across scales’; 2001, Cambridge, Cambridge University Press.
  • M. Sahimi: ‘Heterogeneous materials II’, 552; 2003, New York, Springer.
  • M. Ganchenkova and V. Borodin: Proc. ICSMA 13, Budapest, 2003, Mater. Set Eng. A, 2004, 387-389, 372.
  • A. G. Crocker, P. E. J. Flewitt, J. F. Knott and V. Randle: ‘Role of interfaces in fracture resistance of power generation materials: combined multiscale modelling/experimental approach’; 2003, EPSRC research contract.
  • A. S. Argon and Y. Qiao: Philos. Mag. A, 2002, A82, 3333.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.