Diversity of damage evolution during cyclic loading at very high numbers of cycles

References

• Mughrabi H: Proc. Eng., 2010, 2, 3–26.
   Google Scholar
• Stanzl-Tschegg S, Mayer H: Proc. Int. Conf. on ‘Fatigue in the very high cycle range’, Vienna, Austria, July 2001, University of Agricultural Sciences.
   Google Scholar
• Blom A F (ed.): ‘Special session: giga-cycle fatigue’, Proc. of Fatigue 2002, Vol. 5, 2927–2994; 2002, West Midlands, EMAS Ltd.
   Google Scholar
• Sakai T, Ochi Y: Proc. 3rd Int. Conf. on ‘Very high cycle fatigue’, Kyoto/Kusatsu, Japan,September 2004, Society of Materials Science of Japan.
   Google Scholar
• Allison JE, Jones JW, Larsen JM, Ritchie RO: Proc. 4th Int. Conf. on ‘Very high cycle fatigue’, Ann Arbor, MI, USA, August 2007, TMS Publications.
   Google Scholar
• Wang QY, Bathias C, Kawagoishi N, Chen Q: Int. J. Fatigue, 2002, 24, 1269–1274.
   Web of Science ®Google Scholar
• Chapetti MD, Tagawa T, Miyata T: Mater. Sci. Eng. A, 2003, A356, 227–235.
   Web of Science ®Google Scholar
• Mughrabi H: Int. J. Fatigue, 2006, 28, 1501–1508.
   Web of Science ®Google Scholar
• Mughrabi H: Fatigue Fract. Eng. Mater. Struct., 2002, 25, 755–764.
   Web of Science ®Google Scholar
• Stöcker C, Zimmermann M, Christ H.-J: Int. J. Fatigue, 2011, 33, 2–9.
   Web of Science ®Google Scholar
• Chandran KSR, Chang P, Cashman GT: Int. J. Fatigue, 2010, 32, 482–491.
   Web of Science ®Google Scholar
• Li Y, Yang Z, Li S, Liu Y, Chen S, Hui W: Adv. Eng. Mater., 2009, 11, 561–567.
   Web of Science ®Google Scholar
• Akiniwa Y, Miyamoto N, Tsuru H, Tanaka K: Int. J. Fatigue, 2006, 28, 1555–1565.
   Web of Science ®Google Scholar
• Mayer H, Haydn W, Schuller R, Issler S, Bacher-Höchst M: Int. J. Fatigue, 2009, 31, 1300–1308.
   Web of Science ®Google Scholar
• Pyttel B, Schwerdt D, Berger C: Proc. Eng., 2010, 2, 1327–1336.
   Google Scholar
• Sohar CR, Betzwar-Kotas A, Gierl C, Weiss B, Danninger H: Int. J. Fatigue, 2008, 30, 1137–1149.
   Web of Science ®Google Scholar
• Prasannavenkatesan R, Jixi Z, McDowell DL, Olson GB: Int. J. Fatigue, 2009, 31, 1176–1189.
   Web of Science ®Google Scholar
• Sakai T: J. Soc. Mech. Eng. Int. J. Ser. A, 2009, 3A, 425–439.
   Google Scholar
• Bathias C, Beswick JM: ‘Bearing steel technologies, Vol. 8: developments on rolling bearing steels and testing’, ASTM STP 1524, 160–178; 2010, West Conshohocken, PA, ASTM.
   Google Scholar
• Li SX: Int. Mater. Rev., 2012, 57, 92–114.
   Google Scholar
• Wöhler A: Z. F. Bauwesen, 1863, 13, 233–258.
   Google Scholar
• Sonsino CM: Int. J. Fatigue, 2007, 29, 2246–2258.
   Web of Science ®Google Scholar
• Jha SK, Chandran KSR: Scr. Mater., 2003, 48, 1207–1212.
   Web of Science ®Google Scholar
• Murakami Y, Stanzl-Tschegg S, Mayer H: Proc. Int. Conf. on ‘Fatigue in the very high cycle range’, Vienna, Austria,July 2001, University of Agricultural Sciences, 11–22.
   Google Scholar
• Bomas H, Burkart K, Zoch H.-W: Int. J. Fatigue, 2011, 33, 19–22.
   Web of Science ®Google Scholar
• Harlow DG, Wei RP: Eng. Fract. Mech., 2009, 76, 695–708.
   Web of Science ®Google Scholar
• Stanzl-Tschegg S, Mughrabi H, Schönbauer B: Int. J. Fatigue, 2007, 29, 2050–2059.
   Web of Science ®Google Scholar
• Höppel HW, May L, Prell M, Göken M: Int. J. Fatigue, 2011, 33, 10–18.
   Web of Science ®Google Scholar
• Zuo JH, Wang ZG, Han EH: Mater. Sci. Eng. A, 2008, A473, 147–152.
   Web of Science ®Google Scholar
• Müller-Bollenhagen C, Zimmermann M, Christ H.-J: Proc. Eng., 2010, 2, 1663–1672.
   Google Scholar
• Nishijiama S, Kanazawa K: Fatigue Fract. Eng. Mater. Struct., 1999, 22, 601–607.
   Web of Science ®Google Scholar
• Murakami Y, Nomoto T, Ueda T: Fatigue Fract. Eng. Mater. Struct., 1999, 22, 581–590.
   Web of Science ®Google Scholar
• Chan KS: Int. J. Fatigue, 2010, 32, 1428–1447.
   Web of Science ®Google Scholar
• Kitagawa H, Takahashi S: Proc. 2nd Int. Conf. on ‘Mechanical behavior of materials’, Boston, MA, USA, August 1976, ASM, 627–631.
   Google Scholar
• Bathias C, Paris PC: Int. J. Fatigue, 2010, 32, 894–897.
   Web of Science ®Google Scholar
• Marines-Garcia I, Paris PC, Tada H, Bathias C: Mater. Sci. Eng. A, 2007, A468–A470, 120–128.
   Web of Science ®Google Scholar
• Palin-Luc T, Pérez-Mora R, Bathias C, Dominguez G, Paris PC, Arana JL: Eng. Fract. Mech., 2010, 77, 1953–1962.
   Web of Science ®Google Scholar
• Yi JZ, Torbet CJ, Feng Q, Pollock TM, Jones JW: Mater. Sci. Eng. A, 2007, A443, 142–149.
   Web of Science ®Google Scholar
• Zimmermann M, Stöcker C, Christ H.-J: Int. J. Fatigue, 2011, 33, 42–48.
   Web of Science ®Google Scholar
• Ranc N, Wagner D, Paris PC: Acta Mater., 2008, 56, 4012–4021.
   Web of Science ®Google Scholar
• Stöcker C, Zimmermann M, Christ H.-J: Proc. Eng., 2010, 2, 1383–1392.
   Google Scholar
• Jha SK, John R, Larsen JM: Metall. Mater. Trans. A, 2009, 40A, 2675–2684.
   Web of Science ®Google Scholar
• Bathias C, Drouillac L, le Francois P: Int. J. Fatigue, 2001, 23, 143–151.
   Web of Science ®Google Scholar
• Murakami Y, Endo M: Int. J. Fatigue, 1994, 16, 163–182.
   Web of Science ®Google Scholar
• Sakai T, Harada H, Oguma N: Proc. ECF-16 Conf., Alexandroupolis, Greece, July 2006, ESIS, CD ROM.
   Google Scholar
• Shiozawa K, Morii Y, Nishino S, Lu L: Int. J. Fatigue, 2006, 28, 1521–1532.
   Web of Science ®Google Scholar
• Sohar CR, Betzwar-Kotas A, Gierl C, Weiss B, Danninger H: Int. J. Fatigue, 2008, 30, 2191–2199.
   Web of Science ®Google Scholar
• Zhu X, Shyam A, Jones JW, Mayer H, Lasecki JV, Allison JE: Int. J. Fatigue, 2006, 28, 1566–1571.
   Web of Science ®Google Scholar
• Xu HQ, Bayraktar E, Bathias C: J. Mater. Process. Technol., 2008, 202, 216–223.
   Web of Science ®Google Scholar
• Huang J, Spowart JE, Jones JW: Int. J. Fatigue, 2010, 32, 1243–1254.
   Web of Science ®Google Scholar
• Mayer H, Papakyriacou M, Zettl B, Stanzl-Tschegg SE: Int. J. Fatigue, 2003, 25, 245–256.
   Web of Science ®Google Scholar
• Man J, Obrtlík K, Polák J: Phil. Mag., 2009, 89, (16), 1295–1336.
   Google Scholar
• Christ H.-J: ‘Cyclic stress-strain response and microstructure’, in ‘ASM handbook’, Vol. 19, ‘Fatigue and fracture’, 1996, Materials Park, OH, ASM International, 73–95.
   Google Scholar
• Mughrabi H: in ‘Ermüdungsverhalten metallischer Werkstoffe’, (ed. , Munz D), 7–38; 1985, Oberursel, DGM Informationsgesellschaft Verlag.
   Google Scholar
• Christ H.-J, Mughrabi H, Wittig-Link C: in ‘Basic mechanisms in fatigue of metals’, (ed. , Lukáš P, Polák J), 83–92; 1988, Prag, Academia.
   Google Scholar
• Mughrabi H: Scr. Metall. Mater., 1992, 1499–1504.
   Google Scholar
• Weidner A, Skrotzki W: Int. J. Fatigue, 2010, 32, 851–855.
   Web of Science ®Google Scholar
• Stanzl-Tschegg S, Schönbauer B: Int. J. Fatigue, 2010, 32, 886–893.
   Web of Science ®Google Scholar
• Weidner A, Amberger D, Pyczak F, Schönbauer B, Stanzl-Tschegg S, Mughrabi H: Int. J. Fatigue, 2010, 32, 872–878.
   Web of Science ®Google Scholar
• Bayerlein M, Mughrabi H: Acta Metall. Mater., 1991, 39, 1645–1650.
   Google Scholar
• Man J, Obrtlík K, Polák J: Mater. Sci. Eng. A, 2003, A351, 123–132.
   Google Scholar
• Chan KS, Tian JW, Yang B, Liaw PK: Metall. Mater. Trans. A, 2009, 40A, 2545–2556.
   Web of Science ®Google Scholar
• Buque C: Int. J. Fatigue, 2001, 23, 459–466.
   Web of Science ®Google Scholar
• Roth I, Kübbeler M, Krupp U, Christ H.-J, Fritzen CP: Proc. Eng., 2010, 2, 941–948.
   Google Scholar
• Koster M, Wagner G, Eifler D: Proc. Eng., 2010, 2, 2189–2197.
   Google Scholar
• Feltner EC, Laird C: ‘Factors influencing the dislocation structures in fatigued metals’, TMS-AIME, 1968, 242, 1253–1257.
   Google Scholar
• Lukáš P, Klesnil M: Proc. 2nd Int. Conf. on ‘Corrosion fatigue’(, Devereux O J, et al..), 118–132; 1972, Houston, TX, NACE.
   Google Scholar
• Mughrabi H, Herz K, Stark X: Int. J. Fracture, 1981, 17, 193–220.
   Web of Science ®Google Scholar
• Essmann U, Gösele U, Mughrabi H: Phil. Mag. A, 1981, 44A, 405–426.
   Google Scholar
• Polák J: Mater. Sci. Eng., 1987, 92, 71–80.
   Google Scholar
• Mughrabi H, Wang R, Differt K, Essmann U: Proc. Int. Conf. on ‘Quantitative measurement of fatigue damage’, ASTM STP 811(, Lankford J, et al..), 5–45; 1983, West Conshohocken, PA, ASTM.
   Google Scholar
• Tanaka K, Mura T: J. Appl. Mech., 1981, 48, 97–103.
   Web of Science ®Google Scholar
• Krupp U: ‘Fatigue crack propagation in metals and alloys’; 2007, Weinheim, Wiley-VCH Verlag.
   Google Scholar
• Krupp U, Floer W, Lei J, Hu Y, Christ H.-J, Schick A, Fritzen CP: Phil. Mag. A, 2002, 82A, 3321–3332.
   Google Scholar
• Düber O, Künkler B, Krupp U, Christ H.-J, Fritzen CP: Int. J. Fatigue, 2006, 28, 983–992.
   Web of Science ®Google Scholar
• Marsh KJ, Smith RA, Ritchie RO: ‘Fatigue crack measurement: techniques and applications’; 1991, West Midlands: EMAS Ltd.
   Google Scholar
• Koster M, Wagner G, Eifler D: Proc. Eng., 2010, 2, 2189–2197.
   Google Scholar
• Kumar A, Torbet CJ, Jones JW, Pollock TM: Acta Mater., 2010, 58, 2143–2154.
   Web of Science ®Google Scholar
• Höppel HW, Prell M, May L, Göken M: Proc. Eng., 2010, 2, 1025–1034.
   Google Scholar
• Lukáš P, Kunz L, Svoboda M, Wang Q: in ‘Plasticity, failure and fatigue in structural materials – from macro to nano: proceedings of the Hael Mughrabi symposium’(, Hsia K J, et al..), 161–166; 2008, Warrendale, PA, TMS.
   Google Scholar
• Morrison DJ, Moosbrugger JC: Int. J. Fatigue, 1997, 19, S39–S47.
   Google Scholar
• Lankford J: Fatigue Eng. Mater., 1982, 5, 233–248.
   Web of Science ®Google Scholar
• Davidson DL, Chan KS: Acta Metall., 1989, 37, 1089–1097.
   Google Scholar
• Zimmermann M, Stoecker C, Christ H.-J: in ‘Fatigue of materials – advances and emergences in understanding’, (ed. , Srivatsan T S, Imam M A), 299–315; 2010, Wiley, HobokenNJ, Wiley.
   Google Scholar
• Berger C, Pyttel B, Trossmann T: Int. J. Fatigue, 2006, 28, 1640–1646.
   Web of Science ®Google Scholar
• Wang QY, Kawagoishi N, Chen Q: Int. J. Fatigue, 2006, 28, 1572–1576.
   Web of Science ®Google Scholar
• van Stone RH, Cox TB: ‘Use of fractography and sectioning techniques to study fracture mechanisms’, in ‘Fractography – microscopic cracking processes’, (ed. , Beachem C D, Warke W R), 1976, West Conshohocken, PA, ASTM, 5–23.
   Google Scholar
• Cremer M, Zimmermann M, Christ H.-J: Proc. 18th European Conf. on ‘Fracture’(, Klingbeil D, et al..), Dresden, Germany, August–September2010, ESIS, CD ROM.
   Google Scholar
• Jíša D, Liškutín P, Kruml T, Polák J: Int. J. Fatigue, 2010, 32, 1913–1920.
   Web of Science ®Google Scholar
• Xue Y, el Kadiri H, Horstemeyer MF, Jordon JB, Weiland H: Acta Mater., 2007, 55, 1975–1984.
   Web of Science ®Google Scholar
• Miao J, Pollock TM, Jones JW: Acta Mater., 2009, 57, 5964–5974.
   Web of Science ®Google Scholar
• Davidson DL, Tyron RG, Oja M, Matthews R, Chandran KSR: Metall. Mater. Trans. A, 2007, 38A, 2214–2225.
   Web of Science ®Google Scholar
• Oja M, Chandran KSR, Tyron RG: Int. J. Fatigue, 2010, 32, 551–556.
   Web of Science ®Google Scholar
• Krupp U, Knobbe H, Christ H.-J, Köster P, Fritzen CP: Int. J. Fatigue, 2010, 32, 914–920.
   Web of Science ®Google Scholar
• Blochwitz C, Tirschler W: Mater. Sci. Eng. A, 2003, A339, 318–327.
   Google Scholar
• Bowe KH, Hammerschmidt E, Hornbogen E, Hühner M: Materialwiss. Werkstofftech., 1988, 19, 193–201.
   Web of Science ®Google Scholar
• Peters JO, Ritchie RO: Mater. Sci. Eng. A, 2001, A319–A321, 597–601.
   Google Scholar
• Notkina E, Lütjering G, Gysler A: ‘Surface versus subsurface crack nucleation in the HCF regime of titanium alloys’, Proc. Int. Conf. on ‘Fatigue in the very high cycle range’, Vienna, Austria, July 2001, University of Agricultural Sciences, 149–156.
   Google Scholar
• Stanzl-Tschegg S: Int. J. Fatigue, 2006, 28, 1456–1464.
   Web of Science ®Google Scholar
• McEvily AJ, Nakamura T, Oguma H, Yamashita K, Matsunaga H, Endo M: Scr. Mater., 2008, 59, 1207–1209.
   Web of Science ®Google Scholar
• Morrissey R, Nicholas T: Int. J. Fatigue, 2006, 28, 1577–1582.
   Web of Science ®Google Scholar
• Szczepanski CJ, Jha SK, Larsen JM, Jones JW: Metall. Mater. Trans. A, 2008, 39A, 2841–2851.
   Web of Science ®Google Scholar
• Knobbe H, Köster P, Christ H.-J, Fritzen CP, Riedler M: Proc. Eng., 2010, 2, 931–940.
   Google Scholar
• Liu L, Husseini NS, Torbet CJ, Kumah DP, Clarke R, Pollock TM, Jones JW: J. Eng. Mater. Technol., 2008, 130, 021008-1-6.
   Google Scholar
• McDowell DL, Dunne FPE: Int. J. Fatigue, 2010, 32, 1521–1542.
   Web of Science ®Google Scholar
• Cremer M, Zimmermann M, Christ H.-J: ‘Werkstoffprüfung 2010’, (ed. , Pohl M), 125–130; 2010, Düsseldorf, Verlag Stahleisen.
   Google Scholar