References
- Davis JR: ‘Handbook of Thermal Spray Technology’; 2004, Materials Park, OH, USA, ASM International.
- Saber-Samandari S and Berndt CC: Int. Heat Treat. Surf. Eng., 2010, 4, (1), 7–13.
- McPherson R: Thin Solid Films, 1981, 83, (3), 297–310.
- Fantassi S, Vardelle M, Vardelle A and Fauchais P: J. Therm. Spray Technol., 1993, 2, (4), 379–384.
- Ang ASM, Berndt CC, Dunn M, Sesso ML and Kim SY: J. Am. Ceram. Soc., 2012, 95, (5), 1572–1580.
- Fauchais P and Vardelle A: Int. J. Therm. Sci., 2000, 39, (9–11), 852–870.
- Sampath S, Srinivasan V, Valarezo A, Vaidya A and Streibl T: J. Therm. Spray Technol., 2009, 18, (2), 243–255.
- Friis M and Persson C: J. Therm. Spray Technol., 2003, 12, (1), 44–52.
- Bisson JF, Lamontagne M, Moreau C, Pouliot L, Blain J and Nadeau F: ‘Ensemble in-flight particle diagnostics under thermal spray conditions’, Proc. Int. Thermal Spray Conf., Singapore, 2001, Materials Park, OH, USA, ASM International, 705–714.
- Berndt CC: ‘Feedstock material considerations’, in ‘Handbook of thermal spray technology’, (ed. J. R. Davis), 137–141; 2004, Materials Park, OH, USA, ASM International.
- Fauchais P, Montavon G and Bertrand G: J. Therm. Spray Technol., 2010, 19, (1–2), 56–80.
- Fauchais P, Etchart-Salas R, Rat V, Coudert JF, Caron N and Wittmann-Ténèze K: J. Therm. Spray Technol., 2008, 17, (1), 31–59.
- Pawlowski L: ‘The science and engineering of thermal spray coatings’, xxx, 656 p.: ill.; 624 cm; 2008, Chichester, UK, John Wiley & Sons.
- Pawlowski L: Surf. Coat. Technol., 2008, 202, (18), 4318–4328.
- Van Steenkiste TH, Smith JR and Teets RE: Surf. Coat. Technol., 2002, 154, (2–3), 237–252.
- Sampath S and Wayne SF: J. Therm. Spray Technol., 1994, 3, (3), 282–288.
- De Villiers Lovelock HL: J. Therm. Spray Technol., 1998, 7, (3), 357–373.
- Suresh Babu P, Rao DS, Rao GVN and Sundararajan G: J. Therm. Spray Technol., 2007, 16, (2), 281–290.
- Cheang P and Khor KA: J. Therm. Spray Technol., 1996, 5, (3), 310–316.
- Jiansirisomboon S, MacKenzie KJD, Roberts SG and Grant PS: J. Eur. Ceram. Soc., 2003, 23, (6), 961–976.
- Wang J, Jordan E and Gell M: J. Therm. Spray Technol., 2010, 19, (5), 873–878.
- Fauchais P and Montavon G: Adv. Heat Transfer, 2007, 40, 205–344.
- Vardelle M, Vardelle A, Fauchais P, Li KI, Dussoubs B and Themelis NJ: J. Therm. Spray Technol., 2001, 10, (2), 267–284.
- Cheang P and Khor KA: J. Mater. Process. Technol., 1995, 48, (1–4), 429–436.
- Longo FN, Bader NF and Dorfman MR: ‘Hollow sphere ceramic particles for abradable coatings’, US Patent, 445,018,4 A, 1984.
- Dorfman MR, Correa LF, Dambra CG, Laul K and Schmid RK: ‘Method of producing a pre-alloyed stabilized zirconia powder’, US Patent, 6,869,550 B2, 2005.
- Vaidya A, Streibl T, Sampath S and Zhang H: ‘A comparative diagnostic analysis of morphologically different YSZ powders’, Proc. Int. Thermal Spray Conf., Osaka, Japan, 10–12 May 2004, 400–406; 2004, Duesseldorf, Germany DVS-Verlag GmbH.
- Bouwman AM, Bosma JC, Vonk P, Wesselingh JA and Frijlink HW: Powder Technol., 2004, 146, (1–2), 66–72.
- Niihara K: Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/J. Ceram. Soc. Jpn, 1991, 99, (1154), 974–982.
- Singhal A, Skandan G, Wang A, Glumac N, Kear BH and Hunt RD: Nanostruct. Mater., 1999, 11, (4), 545–552.
- Altman IS, Agranovski IE and Choi M: Appl. Phys. Lett., 2005, 87, (5). ID: 053104.
- Stone V, Johnston H and Clift MJD: IEEE Trans. Nanobiosci., 2007, 6, (4), 331–340.
- Sayes CM, Reed KL and Warheit DB: Toxicol. Sci., 2007, 97, (1), 163–180.
- Kear BH and Skandan G: Nanostruct. Mater., 1997, 8, (6), 765–769.
- Luo P and Nieh TG: Biomaterials, 1996, 17, (20), 1959–1964.
- Lima RS, Kucuk A and Berndt CC: Mater. Sci. Eng. A, 2001, 313, (1–2), 75–82.
- Qiao Y, Fischer TE and Dent A: Surf. Coat. Technol., 2003, 172, (1), 24–41.
- Shaw LL, Goberman D, Ren R, Gell M, Jiang S, Wang Y, Xiao TD and Strutt PR: Surf. Coat. Technol., 2000, 130, (1), 1–8.
- Ying Chun Z, Chuan Xian D, Yukimura K, Danny Xiao T and Strutt PR: Ceram. Int., 2001, 27, (6), 669–674.
- Lima RS and Marple BR: Mater. Sci. Eng. A, 2005, 395, (1–2), 269–280.
- Chen H, Zhang Y and Ding C: Wear, 2002, 253, (7–8), 885–893.
- Karthikeyan J, Berndt CC, Tikkanen J, Reddy S and Herman H: Mater. Sci. Eng. A, 1997, 238, (2), 275–286.
- Bouyer E, Gitzhofer F and Boulos MI: IEEE Trans. Plasma Sci., 1997, 25, (5), 1066–1072.
- Tikkanen J, Gross KA, Berndt CC, Pitkänen V, Keskinen J, Raghu S, Rajala M and Karthikeyan J: Surf. Coat. Technol., 1997, 90, (3), 210–216.
- Karthikeyan J, Berndt CC, Reddy S, Wang JY, King AH and Herman H: J. Am. Ceram. Soc., 1998, 81, (1), 121–128.
- Papyrin A: Adv. Mat. Process., 2001, 159, (9), 49–51.
- Schoop MU: ‘An improved process of applying deposits of metal or metallic compounds to surfaces’, UK Patent, A.D.21,066, 1912.
- Ducos M and Durand JP: ‘Thermal coatings in Europe: a business prospective’, Proc. Int. Thermal Spray Conf., Singapore, 28–30 May 2001, 1267–1271; 2001, Materials Park, OH, USA, ASM International.
- Fukumoto M: J. Therm. Spray Technol., 2008, 17, (1), 5–13.
- Anon: ‘LINDOFLAMM® flame solutions, in Linde Gases Division, Linde AG’; 2013, Pullach, Germany.
- Bunshah RF: ‘Handbook of hard coatings’; 2001, Park Ridge, NJ, USA, William Andrew Publishing/Noyes.
- Poorman RM, Sargent HB and Lamprey H: ‘Method and apparatus utilizing detonation waves for spraying and other purposes’, US Patent, 2,714,563, 1955.
- Zverev AI, Bondarenko AS, Pudzinsky MA, Sopryazhinsky VM and Yakshin NA: ‘Apparatus for detonating application of coatings ‘, US Patent, 4,004,735, 1977
- Tucker RC Jr: J. Vac. Sci. Technol. 1974, 11, (4), 725–734.
- Sundararajan G, Prasad KUM, Rao DS and Joshi SV: J. Mater. Eng. Perform., 1998, 7, (3), 343–351.
- Niemi K, Vuoristo P and Mäntylä T: J. Therm. Spray Technol., 1994, 3, (2), 199–203.
- Thorpe ML and Richter HJ: J. Therm. Spray Technol., 1992, 1, (2), 161–170.
- Kamnis S and Gu S: Chem. Eng. Sci., 2006, 61, (16), 5427–5439.
- Rusch W: ‘Comparison of operating characteristics for gas and liquid fuel HVOF torches’, Proc. Int. Thermal Spray Conf., Beijing, China, 14–16 May 2007, 572–576; 2007, Materials Park, OH, USA, ASM International.
- Dongmo E, Wenzelburger M and Gadow R: Surf. Coat. Technol., 2008, 202, (18), 4470–4478.
- Li M and Christofides PD: Chem. Eng. Sci., 2006, 61, (19), 6540–6552.
- Joshi SV and Sivakumar R: Surf. Coat. Technol., 1991, 50, (1), 67–74.
- Li CJ and Wang YY: J. Therm. Spray Technol., 2002, 11, (4), 523–529.
- Bolelli G, Lusvarghi L, Varis T, Turunen E, Leoni M, Scardi P, Azanza-Ricardo C.-L and Barletta M: Surf. Coat. Technol., 2008, 202, (19), 4810–4819.
- Lesage J and Chicot D: Thin Solid Films, 2002, 415, (1–2), 143–150.
- Kuroda S, Tashiro Y, Yumoto H, Taira S, Fukanuma H and Tobe S: J. Therm. Spray Technol., 2001, 10, (2), 367–374.
- Stokes J and Looney L: Surf. Coat. Technol., 2004, 177–178, 18–23.
- Pina J, Dias A and Lebrun JL: Mater. Sci. Eng. A, 2003, 347, (1–2), 21–31.
- Zhao L, Maurer M, Fischer F, Dicks R and Lugscheider E: Wear, 2004, 257, (1–2), 41–46.
- Kear BH, Skandan G and Sadangi RK: Scr. Mater., 2001, 44, (8–9), 1703–1707.
- Lima RS and Marple BR: Surf. Coat. Technol., 2006, 200, (11), 3428–3437.
- Pfender E: Thin Solid Films, 1994, 238, (2), 228–241.
- Planche MP, Coudert JF and Fauchais P: Plasma Chem. Plasma Process., 1998, 18, (2), 263–283.
- Cetegen BM and Yu W: J. Therm. Spray Technol., 1999, 8, (1), 57–67.
- Remesh K, Yu SCM, Ng HW and Berndt CC: J. Therm. Spray Technol., 2003, 12, (4), 508–522.
- Das DK and Sivakumar R: Acta Metall. Mater., 1990, 38, (11), 2193–2198.
- Fauchais P: J. Phys. D Appl. Phys., 2004, 37, (9), 86–108.
- Cao M, Gitzhofer F, Gravelle DV, Henne R and Boulos MI: Plasma Sources Sci. Technol., 1997, 6, (1), 39–45.
- Zhu S and Xu B: Key Eng. Mater., 2005, 280–283, (II), 1203–1206.
- Tahara H and Ando Y: Vacuum, 2008, 83, (1), 98–101.
- Scrivani A, Bardi U, Carrafiello L, Lavacchi A, Niccolai F and Rizzi G: J. Therm. Spray Technol., 2003, 12, (4), 504–507.
- Coudert JF and Fauchais P: Ann. N. Y. Acad. Sci., 1999, 891, 382–390.
- Fauchais P, Coudert JF and Vardelle M: J. De Phys., 1997, 7, (4), 187–198.
- Vardelle A, Fauchais P, Vardelle M and Mariaux G: Adv. Eng. Mater., 2006, 8, (7), 599–610.
- Dorier JL, Hollenstein C, Salito A, Loch M and Barbezat G: High Temp. Mater. Processes, 2001, 5, (4), 477–489.
- Vysohlid M and Heberlein J: ‘Investigation of arc voltage fluctuations in a plasma torch SG-100 operated with Ar/H2’, Proc. Int. Thermal Spray Conf., Osaka, Japan, 10–12 May 2004, 998–1003; 2004, DVS-Verlag GmbH.
- Dussoubs B, Mariaux G, Vardelle A, Vardelle M and Fauchais P: High Temp. Mater. Processes, 1999, 3, (2–3), 235–254.
- Goutier S, Noguès-Delbos E, Vardelle M and Fauchais P: J. Therm. Spray Technol., 2008, 17, (5–6), 895–901.
- Gerdeman DA and Hecht NL: ‘Arc plasma technology in materials science’, 206; 1972, New York, Springer-Verlag.
- Mash DR, Weare NE and Walker DL: J. Metals, 1961, 13, 473–478.
- Cizek J, Khor KA and Prochazka Z: Mater. Sci. Eng. C, 2007, 27, (2), 340–344.
- Fauchais P, Vardelle A and Dussoubs B: J. Therm. Spray Technol., 2001, 10, (1), 44–66.
- Schoop MU: ‘Apparatus for spraying molten metal and other fusible substances’, USA Patent, 1,133,507, 1915.
- Varacalle DJ, Wilson GC, Johnson RW, Steeper TJ, Irons G, Kratochvil WR and Riggs WL: J. Therm. Spray Technol., 1994, 3, (1), 69–74.
- Alkhimov AP, Papyrin AN, Kosarev VF, Nesterovich NI and Shushpanov MM: ‘Gas-dynamic spray method for applying a coating’, US Patent, 5,302,414, 1994.
- Dykhuizen RC and Smith MF: J. Therm. Spray Technol., 1998, 7, (2), 205–212.
- Stoltenhoff T, Kreye H and Richter HJ: J. Therm. Spray Technol., 2002, 11, (4), 542–550.
- Dykhuizen RC, Smith MF, Gilmore DL, Neiser RA, Jiang X and Sampath S: J. Therm. Spray Technol., 1999, 8, (4), 559–564.
- Van Steenkiste TH, Smith JR, Teets RE, Moleski JJ, Gorkiewicz DW, Tison RP, Marantz DR, Kowalsky KA, Riggs WL Ii, Zajchowski PH, Pilsner B, McCune RC and Barnett KJ: Surf. Coat. Technol., 1999, 111, (1), 62–71.
- Schmidt T, Gärtner F, Assadi H and Kreye H: Acta Mater., 2006, 54, (3), 729–742.
- Assadi H, Gärtner F, Stoltenhoff T and Kreye H: Acta Mater., 2003, 51, (15), 4379–4394.
- Grujicic M, Zhao CL, DeRosset WS and Helfritch D: Mater. Des., 2004, 25, (8), 681–688.
- Grujicic M, Saylor JR, Beasley DE, DeRosset WS and Helfritch D: Appl. Surf. Sci., 2003, 219, (3–4), 211–227.
- Hussain T, McCartney DG, Shipway PH and Zhang D: J. Therm. Spray Technol., 2009, 1–16.
- Leigh SH and Berndt CC: Acta Mater., 1999, 47, (5), 1575–1586.
- Ilavsky J, Long GG, Allen AJ, Herman H and Berndt CC: Ceram. Silik., 1998, 42, (3), 81–89.
- Allen AJ, Long GG, Boukari H, Ilavsky J, Kulkarni A, Sampath S, Herman H and Goland AN: Surf. Coat. Technol., 2001, 146–147, 544–552.
- Sevostianov I and Kachanov M: Mater. Sci. Eng.: A, 2001, 297, (1), 235–243.
- Ostojic P and McPherson R: Mater. Forum, 1987, 10, (4), 247–255.
- Stecura S: ‘Advanced thermal barrier system bond coatings for use on Ni, Co- and Fe-base alloy substrates’, NASA-TM-87062, E-2437, NAS 1·15:87062, NASA, Lewis Research Center, Cleveland, OH, USA, 1985.
- Stecura S: ‘Thermal barrier coating system’, US Patent, 4,485,151, 1984.
- Schütze M: ‘Fundamentals of high temperature corrosion’, in Eds: RW Cahn, P Haasen, EJ Krame, ‘Materials science and technology: a comprehensive treatment’, 67–130; 2008, Weinheim, Germany, Wiley-VCH Verlag GmbH.
- Guilemany JM, Dosta S and Miguel JR: Surf. Coat. Technol., 2006, 201, (3–4), 1180–1190.
- Fisher IA: Int. Mater. Rev., 1972, 17, (1), 117–129.
- Ballard WE and Turner TH: ‘Metal spraying and the flame deposition of ceramics and plastics’; 1963, London, UK, Griffin.
- Marynowski CW, Halden FA and Farley EP: J. Electrochem. Soc., 1965, 3, 109–115.
- Kuroda S and Clyne TW: Thin Solid Films, 1991, 200, (1), 49–66.
- Clyne TW and Gill SC: J. Therm. Spray Technol., 1996, 5, (4), 401–418.
- Matějíček J and Sampath S: Acta Mater., 2001, 49, (11), 1993–1999.
- Kuroda S, Fukushima T and Kitahara S: J. Therm. Spray Technol., 1992, 1, (4), 325–332.
- Teixeira V, Andritschky M, Fischer W, Buchkremer HP and Stöver D: Surf. Coat. Technol., 1999, 120–121, 103–111.
- McCune RC, Donlon WT, Popoola OO and Cartwright EL: J. Therm. Spray Technol., 2000, 9, (1), 73–82.
- Ellor JA, Young WT and Repp J: ‘Thermally sprayed metal coatings to protect steel pilings: final report and guide’, 0309088011 9780309088015, Transportation Research Board, Washington, DC, USA, 2004.
- Jiang X, Wan Y, Herman H and Sampath S: Thin Solid Films, 2001, 385, (1–2), 132–141.
- Fukumoto M, Shiiba M, Kaji H and Yasui T: Pure Appl. Chem., 2005, 77, (2), 429–442.
- Sampath S, Jiang XY, Matejicek J, Leger AC and Vardelle A: Mater. Sci. Eng. A, 1999, 272, (1), 181–188.
- Bengtsson P and Persson C: Surf. Coat. Technol., 1997, 92, (1–2), 78–86.
- Bengtsson P and Johannesson T: J. Therm. Spray Technol., 1995, 4, (3), 245–251.
- Sun L, Berndt CC and Grey CP: Mater. Sci. Eng. A, 2003, 360, (1–2), 70–84.
- Miller R: J. Therm. Spray Technol., 1997, 6, (1), 35–42.
- Darolia R: Int. Mater. Rev., 2013, 58, (6), 315–348.
- Fauchais P, Montavon G, Lima RS and Marple BR: J. Phys. D Appl. Phys., 2011, 44, (9), 1–53.
- Ilavsky J, Berndt CC and Karthikeyan J: J. Mater. Sci., 1997, 32, (15), 3925–3932.
- Matějíček J, Kolman B, Dubský J, Neufuss K, Hopkins N and Zwick J: Mater. Charact., 2006, 57, (1), 17–29.
- Bacciochini A, Montavon G, Ilavsky J, Denoirjean A and Fauchais P: J. Therm. Spray Technol., 2010, 19, (1–2), 198–206.
- Arata Y, Ohmori A and Li C.-J: Thin Solid Films, 1988, 156, (2), 315–326.
- Kuroda S, Dendo T and Kitahara S: J. Therm. Spray Technol., 1995, 4, (1), 75–84.
- Fowler DB, Riggs W and Russ JC: ‘Image analysis applied to thermal sprayed coatings’, Proc. 3rd National Spray Conf., Long Beach, CA, USA, 20–25 May 1990, 303–319; 1990, Materials Park, OH, USA, ASM International.
- Deshpande S, Kulkarni A, Sampath S and Herman H: Surf. Coat. Technol., 2004, 187, (1), 6–16.
- Bacciochini A, Ilavsky J, Montavon G, Denoirjean A, Ben-ettouil F, Valette S, Fauchais P and Wittmann-Teneze K: Mater. Sci. Eng. A, 2010, 528, (1), 91–102.
- Kulkarni A, Gutleber J, Sampath S, Goland A, Lindquist WB, Herman H, Allen AJ and Dowd B: Mater. Sci. Eng. A, 2004, 369, (1–2), 124–137.
- Kulkarni A, Sampath S, Goland A, Herman H and Dowd B: Scr. Mater., 2000, 43, (5), 471–476.
- Rogé B, Fahr A, Giguère JSR and McRae KI: J. Therm. Spray Technol., 2003, 12, (4), 530–535.
- Parthasarathi S, Tittmann B and Onesto E: J. Therm. Spray Technol., 1997, 6, (4), 486–488.
- Anon: ‘ASTM E2109 – 01, Test methods for determining area percentage porosity in thermal sprayed coatings’; 2007, West Conshohocken, PA, ASTM International.
- Sauer JP: J. Therm. Spray Technol., 2005, 14, (3), 313–314.
- Pawley JB: ‘Points, pixels and gray levels: digitizing image data’, in ‘Handbook of biological confocal microscopy’, (ed. J. B. Pawley), 3rd edn, 59–79; 2006, New York, USA, Springer-Verlag.
- Antou G and Montavon G: J. Therm. Spray Technol., 2007, 16, (2), 168–176.
- Otsu N: IEEE Trans. Syst. Man. Cybern., 1979, SMC-9, (1), 62–66.
- Mateos J, Cuetos JM, Fernández E and Vijande R: Wear, 2000, 239, (2), 274–281.
- Liao H, Normand B and Coddet C: Surf. Coat. Technol., 2000, 124, (2–3), 235–242.
- Aw PK, Tan ALK, Tan TP and Qiu J: Thin Solid Films, 2008, 516, (16), 5710–5715.
- Ban ZG and Shaw LL: J. Therm. Spray Technol., 2003, 12, (1), 112–119.
- Voyer J and Marple BR: Wear, 1999, 225–229, (I), 135–145.
- Legoux JG, Arsenault B, Leblanc L, Bouyer V and Moreau C: J. Therm. Spray Technol., 2002, 11, (1), 86–94.
- Sahraoui T, Fenineche NE, Montavon G and Coddet C: J. Mater. Process. Technol., 2004, 152, (1), 43–55.
- Ang ASM, Berndt CC and Cheang P: Surf. Coat. Technol., 2011, 205, (10), 3260–3267.
- Du H, Hua W, Liu J, Gong J, Sun C and Wen L: Mater. Sci. Eng. A, 2005, 408, (1–2), 202–210.
- Abdel-Samad AA, El-Bahloul AMM, Lugscheider E and Rassoul SA: J. Mater. Sci., 2000, 35, (12), 3127–3130.
- Jordan EH, Gell M, Sohn YH, Goberman D, Shaw L, Jiang S, Wang M, Xiao TD, Wang Y and Strutt P: Mater. Sci. Eng. A, 2001, 301, (1), 80–89.
- Lima R, Moreau C and Marple B: J. Therm. Spray Technol., 2007, 16, (5), 866–872.
- Saravanan P, Selvarajan V, Joshi SV and Sundararajan G: J. Phys. D Appl. Phys., 2001, 34, (1), 131–140.
- Westergård R, Erickson LC, Axén N, Hawthorne HM and Hogmark S: Tribol. Int., 1998, 31, (5), 271–279.
- Leigh SH, Lin CK and Berndt CC: J. Am. Ceram. Soc., 1997, 80, (8), 2093–2099.
- Chi W, Sampath S and Wang H: J. Therm. Spray Technol., 2006, 15, (4), 773–778.
- Kulkarni AA, Goland A, Herman H, Allen AJ, Ilavsky J, Long GG and Carlo F: J. Therm. Spray Technol., 2005, 14, (2), 239–250.
- Kulkarni A, Wang Z, Nakamura T, Sampath S, Goland A, Herman H, Allen J, Ilavsky J, Long G, Frahm J and Steinbrech RW: Acta Mater., 2003, 51, (9), 2457–2475.
- Allen AJ, Ilavsky J, Long GG, Wallace JS, Berndt CC and Herman H: Acta Mater., 2001, 49, (9), 1661–1675.
- Guo HB, Murakami H and Kuroda S: J. Am. Ceram. Soc., 2006, 89, (12), 3797–3804.
- Zhou H, Li F, Wang J and Sun B.-D: J. Coat. Technol. Res., 2009, 6, (3), 383–390.
- Li Y, Chi W, Sampath S, Goland A, Herman H, Allen AJ and Ilavsky J: J. Am. Ceram. Soc., 2009, 92, (2), 491–500.
- Scardi P, Leoni M and Bertamini L: Surf. Coat. Technol., 1995, 76–77, (1–3 Pt. 1), 106–112.
- Matějíček J, Sampath S and Dubsky J: J. Therm. Spray Technol., 1998, 7, (4), 489–496.
- Matějíček J, Sampath S, Gnaeupel-Herold T and Prask HJ: Appl. Phys. A Mater. Sci. Process., 2002, 74, (Suppl. II), 1692–1694.
- Scardi P, Leoni M, Bertini L, Bertamini L and Cernuschi F: Surf. Coat. Technol., 1998, 108–109, (1–3), 93–98.
- Schlichting KW, Vaidyanathan K, Sohn YH, Jordan EH, Gell M and Padture NP: Mater. Sci. Eng. A, 2000, 291, (1–2), 68–77.
- Tanaka M, Hasegawa M, Dericioglu AF and Kagawa Y: Mater. Sci. Eng. A, 2006, 419, (1–2), 262–268.
- Withers PJ and Bhadeshia HKDH: Mater. Sci. Technol., 2001, 17, (4), 355–365.
- Kesler O, Matejicek J, Sampath S, Suresh S, Gnaeupel-Herold T, Brand PC and Prask HJ: Mater. Sci. Eng. A, 1998, 257, (2), 215–224.
- Thornton J, Slater S and Almer J: J. Am. Ceram. Soc., 2005, 88, (10), 2817–2825.
- Weyant CM, Almer J and Faber KT: Acta Mater., 2010, 58, (3), 943–951.
- Matějíček J, Sampath S, Brand PC and Prask HJ: Acta Mater., 1999, 47, (2), 607–617.
- Ahmed R, Yu H, Stewart S, Edwards L and Santisteban JR: J. Tribol., 2007, 129, (2), 411–418.
- Portinha A, Teixeira V, Carneiro J, Beghi MG, Bottani CE, Franco N, Vassen R, Stoever D and Sequeira AD: Surf. Coat. Technol., 2004, 188–189, (1–3 Spec. ISS.), 120–128.
- Luzin V, Spencer K and Zhang MX: Acta Mater., 2011, 59, (3), 1259–1270.
- Sampath S, Jiang XY, Matejicek J, Prchlik L, Kulkarni A and Vaidya A: Mater. Sci. Eng. A, 2004, 364, (1–2), 216–231.
- Ahmed R, Fitzpatrick ME and Faisal NH: Surf. Coat. Technol., 2012, 206, (19–20), 4180–4185.
- Ahmed R, Yu H, Stoica V, Edwards L and Santisteban JR: Mater. Sci. Eng. A, 2008, 498, (1–2), 191–202.
- Marot G, Démarécaux P, Lesage J, Hadad M, Siegmann S and Staia MH: Surf. Coat. Technol., 2008, 202, (18), 4411–4416.
- Matějíček J and Sampath S: Acta Mater., 2003, 51, (3), 863–872.
- Itoh Y, Saitoh M and Tamura M: J. Eng. Gas Turbines Power, 1999, 122, (1), 43–49.
- Brenner A and Senderoff S: J. Res. Natl. Bur. Stand., 1949, 42, 105–123.
- Tsui YC and Clyne TW: Thin Solid Films, 1997, 306, (1), 23–33.
- Zhang X, Watanabe M and Kuroda S: Acta Mater., 2013, 61, (4), 1037–1047.
- Vaidya A, Streibl T, Li L, Sampath S, Kovarik O and Greenlaw R: Mater. Sci. Eng. A, 2005, 403, (1–2), 191–204.
- Greving DJ, Rybicki EF and Shadley JR: J. Therm. Spray Technol., 1994, 3, (4), 379–388.
- Hashmi MSJ, Pappalettere C and Ventola F: J. Mater. Process. Technol., 1998, 75, (1–3), 81–86.
- Zhu J, Xie H, Hu Z, Chen P and Zhang Q: J. Therm. Spray Technol., 2012, 21, (5), 810–817.
- Zhu JG, Xie HM, Li YJ, Hu ZX, Luo Q and Gu CZ: Exp. Mech., 2012, 1–10.
- Mathar J: Trans ASME, 1934, 59, 249–254.
- Rendler NJ and Vigness I: Exp. Mech., 1966, 6, (12), 577–586.
- Anon: ‘ASTM E837-08e2 standard test method for determining residual stresses by the Hole-Drilling Strain-Gage Method’; 2008, West Conshohocken, PA, ASTM International.
- Montay G, Cherouat A, Lu J, Baradel N and Bianchi L: Surf. Coat. Technol., 2002, 155, (2–3), 152–160.
- Valente T, Bartuli C, Sebastiani M and Loreto A: J. Therm. Spray Technol., 2005, 14, (4), 462–470.
- Santana YY, La Barbera-Sosa JG, Staia MH, Lesage J, Puchi-Cabrera ES, Chicot D and Bemporad E: Surf. Coat. Technol., 2006, 201, (5), 2092–2098.
- Greving DJ, Shadley JR and Rybicki EF: J. Therm. Spray Technol., 1994, 3, (4), 371–378.
- Gassot H, Junquera T, Ji V, Jeandin M, Guipont V, Coddet C, Verdy C and Grandsire L: Surf. Eng., 2001, 17, (4), 317–322.
- Luzin V, Valarezo A and Sampath S: Mater. Sci. Forum, 2008, 571–572, 315–320.
- Suresh S and Giannakopoulos AE: Acta Mater., 1998, 46, (16), 5755–5767.
- Walley SM: Mater. Sci. Technol., 2012, 28, (9–10), 1028–1044.
- Lin CK and Berndt CC: J. Mater. Sci., 1995, 30, (1), 111–117.
- Valente T: Surf. Coat. Technol., 1997, 90, (1–2), 14–20.
- Factor M and Roman I: Surf. Coat. Technol., 2000, 132, (1), 65–75.
- Chicot D, Hage I, Démarécaux P and Lesage J: Surf. Coat. Technol., 1996, 81, (2–3), 269–274.
- López Cantera E and Mellor BG: Mater. Lett., 1998, 37, (4–5), 201–210.
- Chicot D, Demarecaux P and Lesage J: Thin Solid Films, 1996, 283, (1–2), 151–157.
- Hadad M, Marot G, Demarecaux P, Chicot D, Lesage J, Rohr L and Siegmann S: Surf. Eng., 2007, 23, (4), 279–283.
- Anon: ‘ASTM E384 – 11e1 Standard Test Method for Knoop and Vickers Hardness of Materials’; 2011, West Conshohocken, PA, ASTM International.
- Anon: ‘ASTM C1326 – 08 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics’; 2008, West Conshohocken, PA, ASTM International.
- Anon: ‘ASTM C1327 – 08 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics’; 2008, West Conshohocken, PA, ASTM International.
- Oganov AR and Lyakhov AO: J. Superhard Mater., 2010, 32, (3), 143–147.
- Oliver WC and Pharr GM: J. Mater. Res., 1992, 7, (6), 1564–1580.
- Marshall DB, Noma T and Evans AG: J. Am. Ceram. Soc., 1982, 65, (10), c175–c176.
- Kweh SWK, Khor KA and Cheang P: Biomaterials, 2000, 21, (12), 1223–1234.
- Villalobos-Gutiérrez CJ, Gedler-Chacón GE, La Barbera-Sosa JG, Piñeiro A, Staia MH, Lesage J, Chicot D, Mesmacque G and Puchi-Cabrera ES: Surf. Coat. Technol., 2008, 202, (18), 4572–4577.
- Sakai M: J. Mater. Res., 1999, 14, (9), 3630–3639.
- Factor M and Roman I: Surf. Coat. Technol., 2000, 132, (2–3), 181–193.
- Anon: ‘ASTM E1920 – 03(2008) standard guide for metallographic preparation of thermal sprayed coatings’; 2008, West Conshohocken, PA, ASTM International.
- Alcalá J, Gaudette F, Suresh S and Sampath S: Mater. Sci. Eng. A, 2001, 316, (1–2), 1–10.
- Lawn BR: J. Am. Ceram. Soc., 1998, 81, (8), 1977–1994.
- Nakamura T, Qian G and Berndt CC: J. Am. Ceram. Soc., 2000, 83, (3), 578–584.
- Ctibor P, Boháč P, Stranyánek M and Čtvrtlík R: J. Eur. Ceram. Soc., 2006, 26, (16), 3509–3514.
- Rodriguez J, Rico A, Otero E and Rainforth WM: Acta Mater., 2009, 57, (11), 3148–3156.
- Saber-Samandari S and Gross KA: Surf. Coat. Technol., 2009, 203, (12), 1660–1664.
- Saber-Samandari S, Berndt CC and Gross KA: Acta Biomater., 2011, 7, (2), 874–881.
- Matting HA and Steffens HD: Prog. Appl. Mater. Res., 1967, 7, 91–133.
- Berndt CC: ‘The adhesion of flame and plasma sprayed coatings’, PhD thesis, Monash University, Clayton, VIC, Australia, 1980.
- Lin CK and Berndt CC: J. Therm. Spray Technol., 1994, 3, (1), 75–104.
- Mušálek R, Pejchal V, Vilémová M and Matějíček J: J. Therm. Spray Technol., 2013, 22, (2–3), 221–232.
- Anon: ‘ASTM C633-01(2008) Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings’; 2008, West Conshohocken, PA, ASTM International.
- Anon: ‘ISO 14916:1999 thermal spraying – determination of tensile adhesive strength’; 1999, Geneva, Switzerland, International Organization for Standardization.
- Anon: ‘JIS H 8302:2010 Build-up Thermal Spraying’; 2010, Tokyo, Japan, Japanese Standards Association.
- Berndt CC: J. Mater. Eng., 1990, 12, (2), 151–158.
- Berndt CC: J. Mater. Eng., 1989, 11, (4), 275–282.
- Anon: ‘ASTM D4541 – 09e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers’; 2009, West Conshohocken, PA, ASTM International.
- Elmoursi AA and Patel N: J. Adhes. Sci. Technol., 2004, 18, (5), 597–606.
- Anon: ‘DIN EN 15340 thermal spraying – determination of shear load resistance of thermally sprayed coatings’; 2007, Berlin, Germany, Deutsches Institut für Normung.
- Siegmann S, Dvorak M, Gruetzner H, Nassenstein K and Walter A: ‘Shear testing for characterizing the adhesive and cohesive coating strength without the need of adhesives’, Proc.Int. Therm. Spray Conf., 2005, 823–829.
- Sexsmith M and Troczynski T: J. Therm. Spray Technol., 1994, 3, (4), 404–411.
- Kurzweg H, Heimann RB, Troczynski T and Wayman ML: Biomaterials, 1998, 19, (16), 1507–1511.
- Barradas S, Molins R, Jeandin M, Arrigoni M, Boustie M, Bolis C, Berthe L and Ducos M: Surf. Coat. Technol., 2005, 197, (1), 18–27.
- Bolis C, Berthe L, Boustie M, Arrigoni M, Barradas S and Jeandin M: J. Phys. D Appl. Phys., 2007, 40, (10), 3155–3163.
- Berthe L, Arrigoni M, Boustie M, Cuq-Lelandais JP, Broussillou C, Fabre G, Jeandin M, Guipont V and Nivard M: Nondestr. Test. Eval., 2011, 26, (3–4), 303–317.
- Anon: ‘ASTM C1624 – 05(2010) standard test method for adhesion strength and mechanical failure modes of ceramic coatings by quantitative single point scratch testing’; 2010, West Conshohocken, PA, ASTM International.
- Anon: ‘ISO/DIS 27307 evaluation of adhesion/cohesion of plasma sprayed ceramic coatings by scratch testing’; Under development, Geneva, Switzerland, International Organization for Standardization.
- Vencl A, Arostegui S, Favaro G, Zivic F, Mrdak M, Mitrovic S and Popovic V: Tribol. Int., 2011, 44, (11), 1281–1288.
- Das DK, Srivastava MP, Joshi SV and Sivakumar R: Surf. Coat. Technol., 1991, 46, (3), 331–345.
- Lopez E, Beltzung F and Zambelli G: J. Mater. Sci. Lett., 1989, 8, (3), 346–348.
- Chicot D, Araujo P, Horny N, Tricoteaux A and Lesage J: Surf. Coat. Technol., 2005, 200, (1–4 SPEC. ISS.), 174–177.
- Marot G, Lesage J, Démarécaux P, Hadad M, Siegmann S and Staia MH: Surf. Coat. Technol., 2006, 201, (5), 2080–2085.
- Lin C.-K, Leigh S.-H and Berndt CC: Thin Solid Films, 1997, 310, (1–2), 108–114.
- Goch G, Schmitz B, Karpuschewski B, Geerkens J, Reigl M, Sprongl P and Ritter R: Precis. Eng., 1999, 23, (1), 9–33.
- Almond DP, Patel PM, Pickup IM and Reither H: J. Mater. Energy Syst., 1985, 6, (4), 287–292.
- Staia MH, Ramos E, Carrasquero A, Roman A, Lesage J, Chicot D and Mesmacque G: Thin Solid Films, 2000, 377–378, (1–2), 657–664.
- Weibull W: J. Appl. Mech., 1951, 18, 293–297.
- Sauer JP and Ruoff S: ‘Epoxies used in tensile testing: films vs. liquid-why is there a difference?’, Proc. Int. Thermal Spray Conf., Orlando, FL, USA, 5–8 May 2003, 1447–1453; 2003, Materials Park, OH, USA, ASM International.
- Evans KA: ‘Tensile bond strength variance of thermally sprayed coatings with respect to adhesive type’, Proc. 9th Natl. Thermal Spray Conf., Cincinnati, OH, 7–11 October 1996, 803–806; 1996, Materials Park, OH, USA, ASM International.
- McPherson R: Surf. Coat. Technol., 1989, 39–40, (C), 173–181.
- Kim H.-J and Kweon Y.-G: Thin Solid Films, 1999, 342, (1–2), 201–206.
- Matějíček J, Sampath S, Gilmore D and Neiser R: Acta Mater., 2003, 51, (3), 873–885.
- Li C, Ohmori A and McPherson R: J. Mater. Sci., 1997, 32, (4), 997–1004.
- Musalek R, Matejicek J, Vilemova M and Kovarik O: J. Therm. Spray Technol., 2010, 19, (1–2), 422–428.
- Li J and Ding C: Surf. Coat. Technol., 2001, 135, (2–3), 229–237.
- Hongyu Q, Xiaoguang Y and Yamei W: Int. J. Fract., 2009, 157, (1–2), 71–80.
- Lima RS, Kruger SE and Marple BR: Surf. Coat. Technol., 2008, 202, (15), 3643–3652.
- Kucuk A, Berndt CC, Senturk U, Lima RS and Lima CRC: Mater. Sci. Eng. A, 2000, 284, (1–2), 29–40.
- Choi SR, Zhu D and Miller RA: Int. J. Appl. Ceram. Technol., 2004, 1, (4), 330–342.
- Beghini M, Benamati G, Bertini L and Frendo F: Exp. Mech., 2001, 41, (4), 305–311.
- Kovářík O, Siegl J, Nohava J and Chráska P: J. Therm. Spray Technol., 2005, 14, (2), 231–238.
- Khor KA, Gu YW and Dong ZL: Surf. Coat. Technol., 2001, 139, (2–3), 200–206.
- You JH, Hoschen T and Lindig S: J. Nucl. Mater., 2006, 348, (1–2), 94–101.
- Schwingel D, Taylor R, Haubold T, Wigren J and Gualco C: Surf. Coat. Technol., 1998, 108–109, (1–3), 99–106.
- Wang WZ, Li CJ and Wang YY: Mater. Trans., 2006, 47, (7), 1643–1648.
- Lutz EH: J. Am. Ceram. Soc., 1994, 77, (5), 1274–1280.
- Kuroda S, Fukushima T and Kitahara S: Thin Solid Films, 1988, 164, (0), 157–163.
- Thompson JA and Clyne TW: Acta Mater., 2001, 49, (9), 1565–1575.
- Rybicki E, Shadley J, Xiong Y and Greving DJ: J. Therm. Spray Technol., 1995, 4, (4), 377–383.
- Buchmann M, Escribano M, Gadow R, Bürkle G, Mahlich M and Fecht HJ: ‘On the elastic mechanical properties of thermally sprayed coatings’, Thermal Spray 2002: International Thermal Spray Conference, Essen, Germany, 4–6 March 2002, 598–605; 2002, Duesseldorf, Germany, DVS, Deutscher Verband für Schweißen.
- Damani RJ and Wanner A: J. Mater. Sci., 2000, 35, (17), 4307–4318.
- Tan Y, Shyam A, Choi WB, Lara-Curzio E and Sampath S: Acta Mater., 2010, 58, (16), 5305–5315.
- Giannakopoulos AE and Suresh S: Scr. Mater., 1999, 40, (10), 1191–1198.
- Harok V and Neufuss K: J. Therm. Spray Technol., 2001, 10, (1), 126–132.
- Rico A, Gómez-García J, Múnez CJ, Poza P and Utrilla V: Surf. Coat. Technol., 2009, 203, (16), 2307–2314.
- Kroupa F: J. Therm. Spray Technol., 2007, 16, (1), 84–95.
- Bristow JR: Br. J. Appl. Phys., 1960, 11, (2), 81.
- McPherson R and Shafer BV: Thin Solid Films, 1982, 97, (3), 201–204.
- Musálek R, Kovárík O and Matejícek J: Surf. Coat. Technol., 2010, 205, (7), 1807–1811.
- Griffith AA: Philos. Trans. R. Soc. Lond. A, 1921, 221, (582–593), 163–198.
- Liu AF: ‘Mechanics and mechanisms of fracture: an introduction’, 458; 2005, Materials Park, OH, USA, ASM International.
- Guo DZ and Wang LJ: Surf. Coat. Technol., 1992, 56, (1), 19–25.
- Callus PJ and Berndt CC: Surf. Coat. Technol., 1999, 114, (2–3), 114–128.
- Watanabe M, Owada A, Kuroda S and Gotoh Y: Surf. Coat. Technol., 2006, 201, (3–4), 619–627.
- Zhou YC, Tonomori T, Yoshida A, Liu L, Bignall G and Hashida T: Surf. Coat. Technol., 2002, 157, (2–3), 118–127.
- Zhao PF, Sun CA, Zhu XY, Shang FL and Li CJ: Surf Coat Tech, 2010, 204, (24), 4066–4074.
- Yamazaki Y, Schmidt A and Scholz A: Surf. Coat. Technol., 2006, 201, (3–4), 744–754.
- Zhao Y, Shinmi A, Zhao X, Withers PJ, Van Boxel S, Markocsan N, Nylen P and Xiao P: Surf. Coat. Technol., 2012, 206, (23), 4922–4929.
- Lima MM, Godoy C, Modenesi PJ, Avelar-Batista JC, Davison A and Matthews A: Surf. Coat. Technol., 2004, 177–178, 489–496.
- Ray AK: Bull. Mater. Sci., 1999, 22, (1), 25–32.
- Heintze GN and McPherson R: Surf. Coat. Technol., 1988, 34, (1), 15–23.
- Brown WF and Srawley JE: ‘Plane strain crack toughness testing of high strength metallic materials’, 129; 1966, Materials Park, OH, USA, ASTM International.
- Berndt CC and Lin CK: J. Adhes. Sci. Technol., 1993, 7, (12 Pt. 2), 1235–1264.
- Lawn BR, Evans AG and Marshall DB: J. Am. Ceram. Soc., 1980, 63, (9–10), 574–581.
- Niihara K, Morena R and Hasselman DPH: J. Mater. Sci. Lett., 1982, 1, (1), 13–16.
- Ang ASM and Berndt CC: ‘Mechanical properties of plasma sprayed YSZ coatings measured using TAT and TCT test’, Int. Thermal Spray Conf. 2013: innovative coating solutions for the global economy, Busan, Korea, May 13–15, 2013; 2013, Materials Park, OH, USA, ASM International.
- Lima RS, Kucuk A and Berndt CC: Mater. Sci. Eng. A, 2002, 327, (2), 224–232.
- Aw PK and Tan BH: J. Mater. Process. Technol., 2006, 174, (1–3), 305–311.
- Wang L, Wang Y, Sun XG, He JQ, Pan ZY and Wang CH: Vacuum, 2012, 86, (8), 1174–1185.
- Danzer R, Lube T, Supancic P and Damani R: Adv. Eng. Mater., 2008, 10, (4), 275–298.
- Lima RS and Marple BR: J. Therm. Spray Technol., 2003, 12, (2), 240–249.
- Li JF and Ding CX: J. Mater. Sci. Lett., 1999, 18, (19), 1591–1593.
- Ostojic P and Berndt CC: Surf. Coat. Technol., 1988, 34, (1), 43–50.
- Ang ASM, Sanpo N, Sesso ML, Kim SY and Berndt CC: J. Therm. Spray Technol., 2013, 22, (7), 1170–1183.