References
- Sun X, Stephens EV, Khaleel MA: ‘Effects of fusion zone size and failure mode on peak load and energy absorption of advanced high strength steel spot welds under lap shear loading conditions’, Eng. Fail. Anal., 2008, 15, 356–367.
- Pouranvari M, Abedi A, Marashi P, Goodarzi M: ‘Effect of expulsion on peak load and energy absorption of low carbon resistance spot welds’, Sci. Technol. Weld. Join., 2008, 13, 39–43.
- Sun X, Stephens EV, Davies RW, Khaleel MA, Spinella DJ: ‘Effects of failure modes on strength of aluminum resistance spot welds’, Weld. J., 2004, 83, 188s–195s.
- Zhang H, Senkara J: ‘Resistance welding: fundamentals and applications’; 2005, Boca Raton, FL, Taylor & Francis CRC Press.
- Zhang H, Zhou M, Hu SJ: ‘Impact strength measurement of spot welds’, Proc. Inst. Mech. Eng. B: J. Eng. Manuf. , 2001, 215, 403–414.
- Nieto J, Guerrero-Mata MP, Colas R, Mani A: ‘Experimental investigation on resistance spot welding of galvannealed HSLA steel’, Sci. Technol. Weld. Join., 2006, 11, 717–722.
- Pouranvari M, Marashi SPH: ‘Key factors influencing mechanical performance of dual phase steel resistance spot welds’, Sci. Technol. Weld. Join., 2010, 15, 149–155.
- Zuniga SM: ‘Predicting overload pull-out failures in resistance spot welded’, PhD thesis, Stanford University, Stanford, CA, USA, 1994.
- Marya M, Gayden XQ: ‘Development of requirements for resistance spot welding dual-phase (DP600) steels. Part 2. Statistical analyses and process maps’, Weld. J., 2005, 84, 197s–204s.
- Hernandez VHBaltazar, Kuntz ML, Khan MI, Zhou Y: ‘Influence of weld size and microstructure of dissimilar AHSS resistance spot welds’, Sci. Technol. Weld. Join., 2008, 13, 769–776.
- Alenius M, Pohjanne P, Somervuori M, Hanninen H: ‘Exploring the mechanical properties of spot welded dissimilar joints for stainless and galvanized steels’, Weld. J., 2006, 85, 305s–313s.
- Marashi P, Pouranvari M, Amirabdollahian S, Abedi A, Goodarzi M: ‘Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized & austenitic stainless steels’, Mater. Sci. Eng. A, 2008, A480, 175–180.
- Pouranvari M, Marashi SPH: ‘Similar and dissimilar RSW of low carbon and austenitic stainless steels: effect of weld microstructure and hardness profile on failure mode’, Mater. Sci. Technol., 2009, 25, 1411–1416.
- Poggio S, Ponte M, Gambaro C, Adamowski J: ‘Resistance spot welding of advanced high strength steel DP600’, Proc. 1st Int. Conf. on ‘Super high strength steels’, Rome, Italy, November 2005, Association Italiana di Metallurgia, 1–13.
- Khan MS, Bhole SD, Chen DL, Biro E, Boudreau G, van Deventer J: ‘Welding behaviour, microstructure and mechanical properties of dissimilar resistance spot welds between galvannealed HSLA350 and DP600 steels’, Sci. Technol. Weld. Join., 2009, 14, 616–625.
- ‘Specification for automotive weld quality resistance spot welding of steel’, D8·1M, AWS, New York, USA.
- Gould JE, Khurana SP, Li T: ‘Predictions of microstructures when welding automotive advanced high-strength steels’, Weld. J., 2006, 86, 111s–116s.
- Pouranvari M, Asgari HR, Mosavizadeh SM, Marashi PH, Goodarzi M: ‘Effect of weld nugget size on overload failure mode of resistance spot weld’, Sci. Technol. Weld. Join., 2007, 12, 217–225.
- Easterling KE: ‘Modelling the weld thermal cycle and transformation behavior in the heat-affected zone’, in ‘Mathematical modelling of weld phenomena’, (ed. , Cerjak H, Easterling K E); 1993, London, The Institute of Materials. Association Italiana di Metallurgia, 183–200.
- Pouranvari M, Marashi SPH: ‘Failure of resistance spot welds: tensile–shear versus coach–peel loading’, Ironmaking Steelmaking, 2012, 39, 104–111.
- Goodarzi M, Marashi SPH, Pouranvari M: ‘Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel’, J. Mater. Process. Technol., 2009, 209, 4379–4384.
- Zuniga SM: ‘Predicting overload pull-out failures in resistance spot welds’, PhD dissertation, Stanford University, Stanford, CA, USA, 1994.
- Pouranvari M: ‘Prediction of failure mode in AISI304 resistance spot welds’, Metalurgija: J. Metall., 2011, 17, 23–30.
- Pouranvari M, Marashi SPH: ‘Failure mode transition in AHSS resistance spot welds. Part I. Controlling factors’, Mater. Sci. Eng. A, 2011, A528, 8337–8343.
- Pouranvari M, Marashi SPH, Safanama DS: ‘Failure mode transition in AHSS resistance spot welds. Part II. Experimental investigation and model validation’, Mater. Sci. Eng. A, 2011, A528, 8344–8352.
- Pouranvari M: ‘Failure mode transition in similar and dissimilar resistance spot welds of HSLA420 and low carbon steels’, Can. Metall. Q., 2012, 51, 67–74.
- Abadi MMH, Pouranvari M: ‘Correlation between macro/micro structure and mechanical properties of dissimilar resistance spot welds of AISI 304 austenitic stainless steel and AISI 1008 low carbon steel’, Metalurgija: J. Metall., 2010, 16, 133–146.