Design and shape control technology of asymmetric universal crown temper mill

References

• H. M. Liu, Z. Z. Zheng and Y. Peng: ‘Computer simulation of shape control character for six-high CVC wide strip mill’, J. Iron Steel Res., 2001, 13, (1), 14–18.
   Google Scholar
• H. M. Liu, J. C. Lian and Y. Peng: ‘Third-power spline function strip element method and its simulation of the three-dimensional stresses and deformations of cold strip rolling’, J. Mater. Process. Technol., 2001, 116, (2), 235–243. doi: 10.1016/S0924-0136(01)00999-2
   Web of Science ®Google Scholar
• K. H. Yun, T. J. Shin and M. H. Sang: ‘A finite element-based on-line model for the prediction of deformed roll profile in flat rolling’, ISIJ Int., 2007, 47, (9), 1300–1308. doi: 10.2355/isijinternational.47.1300
   Web of Science ®Google Scholar
• F. S. Du, T. Xue and J. N. Sun: ‘FEM analysis for roll deformation and flattening of six-high CVC mill’, J. Yanshan Univ., 2011, 35, (5), 396–401.
   Google Scholar
• J. Y. Jung and Y. T. Im: ‘Simulation of fuzzy shape control for cold-rolled strip with randomly irregular strip shape’, J. Mater. Process. Technol., 1997, 63, (1), 248–253. doi: 10.1016/S0924-0136(96)02631-3
   Web of Science ®Google Scholar
• J. Y. Jung, Y. T. Irn and L. K. Hyung: ‘Fuzzy-control simulation of cross-sectional shape in six-high cold-rolling mills’, J. Mater. Process. Technol., 1996, 62, (1), 61–69. doi: 10.1016/0924-0136(95)02176-0
   Web of Science ®Google Scholar
• D. V. Raju, A. Iqbal, A. K. Trivedi and A. Mukhopadhyay: ‘Prediction of shape defects over length of cold rolled sheet using artificial neural networks’, Ironmaking Steelmaking, 2007, 34, (2), 166–176. doi: 10.1179/174328107X155268
   Web of Science ®Google Scholar
• Z. H. Bai: ‘Temper rolling process model’, 59–67; 2010, Beijing, Metallurgical Industry Press.
   Google Scholar
• J. G. Cao, Y. Zhang, G. H. Yang, X. M. Meng, L. C. Cao, X. H. Zhou and Z. K. Wang: ‘Intermediate roll contour of six-high UCM cold rolling mill’, J. Cent. South Univ., 2011, 42, (4), 966–971.
   Google Scholar
• Z. K. Dong, X. D. Qi, W. Ju, J. C. Lian and W. Z. Zhang: ‘Optimization design of roll shape for UCM tandem cold mills’, Mech. Des., 2010, 27, (12), 70–73.
   Google Scholar
• X. D. Wang, F. Li, B. H. Li, G. S. Zhu, B. Li and B. H. Zhang: ‘VCR back-up roll and negative work roll contour design for solving roll spalling and transfer bar profile problems in hot strip mill’, Ironmaking Steelmaking, 2010, 37, (8), 633–640. doi: 10.1179/030192310X12700328925949
   Web of Science ®Google Scholar
• D. H. Zhang, P. F. Wang, J. S. Wang and J. W. Liu: ‘Models and application for intermediate roll shifting control of UCM cold mill’, Iron & Steel, 2010, 45, (2), 53–57.
   Google Scholar
• S. Q. Zhang, H. Huang and D. H. Jiang: ‘Calculation of optimum intermediate roll shifting position of UCM mill’, Steel Rolling, 2012, 29, (4), 13–15.
   Google Scholar
• J. C. Lian and Z. Y. Duan: ‘Research on the lateral spread of rolled stock’, Iron & Steel, 1984, 19, (11), 15–19.
   Google Scholar
• J. C. Lian and H. M. Liu: ‘Control of thickness and shape’, 45–60; 1995, Beijing, Weapon Industry Press.
   Google Scholar
• Z. H. Bai, L. F. Han, J. Z. Li, X. C. Ma, X. D. Shi and Q. S. Zhang: ‘Research of the plate-shaped model of four-roll mill when rolling under asymmetric state’, Chin. J. Mech. Eng., 2012, 48, (20), 77–82. doi: 10.3901/JME.2012.20.077
   Google Scholar
• Y. Zhang: ‘Properties research of asymmetrical shape control in six-high rolling mill’, Metall. Equip., 2012, (2), 13–17.
   Google Scholar
• Z. Y. Jiang, H. T. Zhu and A. K. Tieu: ‘Study of work roll edge contact in asymmetrical rolling by modified influence function method’, J. Mater. Process. Technol., 2005, 162, (20), 512–518. doi: 10.1016/j.jmatprotec.2005.02.103
   Web of Science ®Google Scholar
• B. Q. Liu, H. Zhang, Z. D. Wang, J. S. Wang and Y. Zhang: ‘Theoretical research and application of the asymmetrical bending of work rolls for shape control in a cold rolling mill’, J. Beijing Univ. Sci. Technol., 2012, 34, (2), 185–189.
   Google Scholar
• J. M. Sun and Y. C. Liang: ‘Optimal design of machine’, 18–21; 2010, Beijing, China Machine, Press.
   Google Scholar
• J. S. Dhillon Nitin Narang and D. P. Kothari: ‘Multi-objective fixed head hydrothermal scheduling using integrated predator-prey optimization and Powell search method’, Energy, 2012, 47, (1), 237–252. doi: 10.1016/j.energy.2012.09.004
   Web of Science ®Google Scholar
• P. T. Wang: ‘Method of optimization with application’, Syst. Eng. Theory Pract., 1997, (9), 63–67.
   Google Scholar