References
- J. C. Werquin and J. C. Cailaud: in ‘Roll for the metal working industries’, (ed. R. B. Corbett), 55-71; 1990, Warrendale, PA, Iron and Steel Society Inc.
- W. H. Betts and H. L. Baxter: in ‘Roll for the metal working industries’, 23-30; 1990, Warrendale, PA, Iron and Steel Society Inc.
- Y. H. Moon, J. W. Kim and C. J. Van Tyne: Met. Mater. Int., 2005, 11, 169–177.
- M. F. Kanninen and C. H. Popelar: ‘Advanced fracture mechanics’, Chapter 1; 1985, New York, Oxford University Press.
- S. R. Hara: 'Tribology in rolling process', 148th Nishiyama Memorial Lecture, Iron and Steel Institute of Japan, Tokyo, Japan, 1993, 131.
- S. H. Yu, Y. B. Chun, W. Q. Cao, M. H. Kim, S. W. Chae, S. I. Kwun, D. H. Shin and S. K. Hwang: Met. Mater. Int., 2005, 11, 101–112.
- S. Lee, D. H. Kim, J. H. Ryu and K. Shin: Metall Mater. Trans. A, 1997, 28A, 2595–2608.
- J. H. Ryu, O. Kwon, P. J. Lee and Y. M. Kim: ISIJ Int., 1992, 32, 1221–1223.
- S. Lee, K.-S. Sohn, C. G. Lee and B. I. Jung: Metall Mater. Trans. A, 1997, 28A, 123–134.
- W. F. Smith: ‘Structure and properties of engineering alloys’, Chapter 1 and 9; 1981, New York, McGraw-Hill.
- S. J. Manganello: in ‘Roll for the metal working industries’, 227-242; 1990, Warrendale, PA, Iron and Steel Society Inc.
- J. J. de Barbadillo and C. J. Trozzi: Iron Steel Eng., 1981, 58, 63–72.
- Y. Sano, T. Hattori and M. Haga: ISIJ Int., 1992, 32, 1194–1201.
- T. Kudo, S. Kawashima and R. Kurahashi: ISIJ Int., 1992, 32, 1190–1193.
- K. Goto, Y. Matsuda, K. Sakamoto and Y. Sugimoto: ISIJ Int., 1992, 32, 1184–1189.
- J. X. Liu, Z. W. Shi, D. X. Jian, L. Yan and R. Long: Met. Mater. Int., 2006, 12, 371–376.
- L. A. Dobrzanski: Steel Res., 1986, 57, 37–45.
- B. C. Kim, S. Lee, D. Y. Lee and N. J. Kim: Metall Trans. A, 1991, 22A, 1889–1892.
- K. S. Sohn, S. Lee and N. J. Kim: Mater. Sci. Eng. A, 1993, A167, 11–21.
- Z.-B. Kuang: Eng. Fract. Mech., 1982, 16, 19–33.
- R. O. Ritchie, B. Francis and W. L. Serve: Metall. Trans. A, 1976, 7A, 831–838.
- Y. H. Kim, D. Kwon and S. Lee: Acta Metall., 1994, 42, 1887–1891.
- S. Karagoz and H. Fischmeister: Steel Res., 1987, 58, 46–51.
- D. Broek: ‘Elementary engineering fracture mechanics’, Chapter 8; 1983, The Hague, Martinus Nijhoff Publishers.
- K. C. Hwang, S. Lee and E. Lee: Tetsu-To-Hagane, 1997, 83, 37–42.
- K. C. Hwang, S. Lee and H. C. Lee: Mater. Sci. Eng. A, 1998, A254, 296–304.
- W. J. Plumbridge and R. A. Bartlett: Int. J. Fatigue, 1982, 25, 209–216.