REFERENCE
- A. J. DeArdo: Int. Mater. Rev., 2003, 48, 371–402.
- M. Militzer: Science, 2002, 298, 975–976.
- J. Shaw, B. Engl, C. Espina, E. C. Oren and Y. Kawamoto: in ‘New steel sheets and steel bar products and processing’, SAE-SP 1685, (ed. D. W. Anderson et al), 63-71; 2002, Warrendale, PA, SAE.
- I. Y. Pyshmintsev, C. Mesplont, S. Jacobs and B. C. de Cooman: Steel Res., 2002, 73, 392–402.
- R. Priestner and M. S. Biring: Met. ScL, 1973, 7, 60–64.
- C. Mesplont, S. Vandeputte and B. C. De Cooman: Proc. 43rd Mechanical Working and Steel Processing Conf., Vol. XLIII, Warrendale, PA, USA, 2001, ISS, 359–371.
- ‘Advanced high strength steel (AHSS) application guidelines’, report, Version 3, International Iron and Steel Institute, Committee on Automotive Application, September, 2006.
- C. M. Sellars and J. A Whiteman: Met. ScL, 1979, 13, 187–194.
- C. M. Sellars: 'Sheffield Int. Conf. on “Working and forming processes”, (ed. C. M. Sellars and G. J. Davies), 3-15; 1980, London, Met. Soc.
- M. Suehiro, K. Sato, Y. Tsukano, H. Yada, T. Senuma and Y. Matsumura: Trans. ISIJ, 1987, 27, 439–445.
- J. H. Beynon and C. M. Sellars: ISIJ Int., 1992, 32, 359–367.
- O. Kwon, K. J. Lee, J. K. Lee, K. B. Kang, J. K. Kim, J. D. Lee and J. Kim: in ‘HSLA Steels'95’, (ed. G. Liu et al), 82-89; 1995, Beijing, China Science & Technology Press.
- J. Andorfer, D. Auzinger, B. Buchmayr, W. Giselbrecht, G. Hribernig, G. Hubmer, A. Luger and A. Samoilov: 'Thermec'97', (ed. T. Chandra and T. Sakai), 2069-2075; 1997, Warrendale, PA, TMS.
- I. V. Samarasekera, D. Q. Jin and J. K. Brimacombe: Proc. 38th Mechanical Working Steel Processing Conf., Vol. XXXIV, Warrendale, PA, USA, 1997, ISS, 313–327.
- A. J. Trowsdale, K. Randerson, P. F. Morris, Z. Husain and D. N. Crowther: Ironmaking Steelmaking, 2001, 28, 170–174.
- Y. Saito: Mater. &I. Eng A, 1997, A223, 134–145.
- A. Perlade, D. Grandemange and T. lung: Ironmaking Steelmaking, 2005, 32, 299–302.
- Y. J. Lan, D. Z. Li, X. C. Sha and Y. Y. Li: Steel Res. Int., 2004, 75, 462–467.
- P. D. Hodgson and R. K. Gibbs: ISIJ Int., 1992, 32, 1329–1338.
- B. Buchmayr, A. Samoilov, L. Lachmann and G. Aigmuller: Proc. 1st Int. Conf. on ‘Modelling of metal rolling process’, 134-148; 1993, London, The Institute of Materials.
- M. Pietrzyk: J. Mater. Proc. TechnoL, 2002, 125-126, 53–62.
- M. Militzer, E. B. Hawbolt and T. R. Meadowcroft: Metall Mater. Trans. A, 2000, 31A, 1247–1259.
- D. Liu, M. Militzer and W. J. Poole: Mater. Sci. Forum, 2007,539-543, 4391–4396.
- D. Liu, F. Fazeli and M. Militzer: ISIJ Int., 2007, 47, 1789–1798.
- A. Samoilov, Y. Titovets, N. Zolotorevskii, G. Hribernig and P. Stiaszny: Proc. 2nd Int. Conf. on ‘Processing materials for properties’, (ed. B. Mishra and C. Yamauchi), 639-643; 2000, Warrendale, PA, TMS.
- F. Fazeli and M. Militzer: Steel Res., 2002, 73, 242–248.
- F. Fazeli and M. Militzer: ‘Solid-solid phase transformations in inorganic materials 2005’, (ed. J. M. Howe et al), 835-841; 2005, Warrendale, PA, TMS.
- H. N. Han and S.-H. Park: Mater. ScL Technot , 2001, 17, 721–726.
- D. Liu, F. Fazeli, M. Militzer and W. J. Poole: Metall Mater. Trans. A, 2007, 38A, 894–909.
- D. Siodlak, U. Lotter, R. Kawalla and G. Paul: Steel Res. Int., 2005, 76, 815–821.
- S. Sarkar, W. J. Poole and M. Militzer: ‘Advances in materials and materials processing (ICAMMP-2006)’, (ed. U. K. Chatterjee and B. K. Dhindaw), 682–692; 2006, Kharagpur, ITT.
- S. Sarkar, M. Militzer, W. J. Poole and A. Moreau: in ‘Advanced steels’, (ed. J. A. Szpunar and H. Li), 119-130; 2006, Montreal, PQ, The Metallurgical Society of CIM.
- S. Sarkar, A. Moreau, M. Militzer and W. J. Poole: Metall Mater. Trans., 2008, 39A, 897–907.
- F. S. LePera: JOM, 1980, 32 (3), 38–39.
- ‘ 1994 annual book of ASTM standard’, E112-881994, 3.01, ASTM, 227.
- A. Giumelli, M. Militzer and E. B. Hawbolt: ISIJ Int., 1999, 39, 271–280.
- U. F. Kocks and H. Mecking: Prog. Mater. ScL, 2003, 48, 171–273.
- H. J. Frost and M. F. Ashby: ‘Deformation mechanism maps’, 20; 1982, Oxford, Pergamon Press.
- M. Onink, C. M. Brakman, F. D. Tichelaar, E. J. Mittemeijer, S. vander Zwaag, J. H. Root and N. B. Konyer: Scr. Metall Mater., 1993, 29, 1011–1016.
- H. S. Zurob, C. R. Hutchinson, Y. Brechet and G. Purdy: Acta Mater., 2002, 50, 3075–3092.
- S. Sarkar, M. Militzer, W. J. Poole and F. Fazeli: Proc. Int. Symp. on ‘Advanced high-strength and other specialty sheet steel products for the automotive industry’, MST'07, AIST/TMS, Warrendale, PA, USA, 2007,61–72.
- P. Guyot, M. Verdier and Y. Brechet: Acta Mater., 1998, 47, 127–134.
- M. Pietrzyk: Mater. Process Technot, 2002, 125-126, 53–62.
- W. P. Sun, M. Militzer, E. B. Hawbolt and T. R. Meadowcroft: Trans. ISS, 1998, 25, (5), 85–94.
- F. J. Humphreys and M. Hatherly: ‘Recrystallization and related annealing phenomena’ 2nd edn; 1996, Oxford, Pergamon Press Ltd.
- M. Militzer: ISIJ Int., 2007, 47, 1–15.
- N. A. Gjostein, H. A. Domian, H. I. Aaronson and E. Eichen: Acta Metall., 1966, 14, 1637–1644.
- K. M. Wu, M. Kagayama and M. Enomoto: Mater. Sci. Eng. A, 2003, A343, 143–150.
- E. S. Humphreys, H. A. Fletcher, J. D. Hutchins, A. J. Garratt-Reed, W. T. Reynolds, H. I. Aaronson, G. R. Purdy and G. D. W. Smith: Metall Mater. Trans. A, 2004, 35A, 1223–1235.
- S. Lacroix, Y. Brechet, M. Veron, D. Quidort, M. Kandel and T. LUNG: ‘Austenite formation and decomposition’, (ed. E. B. Damm and M. J. Merwin), 367-379; 2003, Warrendale, PA, TMS.
- M. Militzer, R. Pandi and E. B. Hawbolt: Metall. Mater. Trans. A, 1996, 27A, 1547–1556.
- J. Agren: Scr. Metall., 1986, 20, 1507–1510.
- A. Ali and H. K. D. H. Bhadeshia: Mater. Set Technol., 1990, 6, 781–784.
- M. Militzer, W. J. Poole and W. P. Sun: Steel Res., 1998, 69, 279–285.
- N. Nakata and M. Militzer: ISIJ Int., 2005, 45, 82–90.
- H. Shercliff and M. F. Ashby: Acta Metall Mater., 1990, 38, 1789–1802.
- M. Charleux, W. J. Poole, M. Militzer and A. Deschamps: Metall. Mater. Trans. A, 2001, 32A, 1635–1647.
- M. Militzer, S. Sarkar, K. Mukherjee, H. Azizi-Alizamini and W. J. Poole: Proc. New Developments on Metallurgy and Applications of High Strength Steels, 2008, Buenos Aires, SAM association Argentina de Materiales.