References
- M. Pouranvari, A. Abedi, P. Marashi and M. Goodarzi: Sci Technol. Weld. Join., 2008, 13, 39–43.
- N. T. Williams and J. D. Parker: Int. Mater. Rev., 2004,49, 45–75.
- M. Zhou, H. Zhang and S. J. Hu: Weld J., 1999, 78, 305s-313s.
- H. Zhang, M. Zhou and S. J. Hu: Proc. IMechE Part B, J. Eng. Manuf, 2001,215, (3), 403-414(12).
- ‘Recommended practices for test methods and evaluation the resistance spot welding behaviour of automotive sheet steels’, ANSI/AWS/SAE D 8.9-97.
- J. E. Gould, S. P. Khurana and T. Li: Weld J., 2006,86, 111s-116s.
- ‘Method of inspection for spot welds’, JIS Z 3140, Japanese Industrial Standard, 1989.
- ‘Resistance spot welding’, DVS 2923, German Standard.
- X. Sun, E. V. Stephens and M. A. Khaleel: Eng. Fail. Anal, 2008, 15, 356–367.
- M. Marya, K. Wang, L. G. Hector and X. Gayden: J. Manuf Sci. Eng., 2006, 128, 287–298.
- M. Zhou, H. Zhang and S. J. Hu: Weld. J., 2003, 82, 72–77.
- Q. Song, W. Zhang and N. Bay: Weld J., 2005, 84, 73s-76s.
- S. S. Babu, M. L. Santella, Z. Feng, B. W. Riemer and J. W. Cohron: Set Technol Weld. Join., 2001, 6, 126–132.
- H. Zhang and J. Senkara: ‘Resistance welding: fundamentals and applications’: 2005, Boca Raton, FL, Taylor and Francis CRC Press; 2005.
- Y. J. Chao: Sci. Technot Weld. Join., 2003,8, 133–137
- X. Sun, E. V. Stephens and M. A. Khaleel: Weld. I, 2007, 86, 18s-25s.
- M. Marya and X. Q. Gayden: Weld J., 2005, 84, 197s-204s.
- M. Pouranvari, H. R. Asgari, S. M. Mosavizadeh, P. H. Marashi and M. Goodarzi: Set Technot Weld Join., 2007, 12, 217–225.
- S. Zuniga and S. D. Sheppard: in ‘Fatigue and fracture mechanics’, (ed. R. S. Piascik et al), Vol. 27, 469-489; 1997, Philadelphia, PA, ASTM.
- Y. J. Chao: ASME. J. Eng. Mater. Technol, 2003, 125, 1–8.
- M. Goodarzi, S. P. H. Marashi and M. Pouranvari: J. Mater. Process. Technol, 2008/2009, 209, (9), 4379–4384.
- H. Zhang: Weld J., 1999, 78, 373s-380s.
- K. E. Esterling: ‘Introduction to the physical metallurgy of welding’: 1983, Stoneham, MA, Butterworth Publishers.
- X. Deng, W. Chen and G. Shi: Finite Element Anal. Design, 2000, 35, 17–39.
- M. Zhou: ‘A unified approach to assessing the mechanical performance of resistance spot welds’, PhD thesis, University of Michigan, An Arbor, MI, USA, 2003.
- W. Chuko and J. E. Gould: ‘Development of appropriate resistance spot welding practice for transformation-hardened steels — phase 2: evaluation of post-weld cooling rate techniques’, Report to the American Iron and Steel Institute, 2002.
- A. Joaquin, A. N. A. Elliott and C. Jiang: Weld. I, 2007,86, 24–27.
- J. Heuschkel: Weld. J, 1952, 31, 931s-943s.
- J. M. Sawhill and J. C. Baker: Weld. I, 1980, 59, 19s-30s.
- M. I. Khan, M. L. Kuntz and Y. Zhou: Set Technot Weld. Join., 2008, 13, 294–304.
- V. H. Lopez-Cortez and F. A. Reyes-Valdes: Weld J., 2008, 87, 36–39.