References
- Kim SK, Cho JW, Kwak WJ, Kim G: ‘Development of TWIP steel for automotive applications’, Proc. 3rd Int. Conf. on ‘New developments in metallurgical process technologies’, Dusseldorf, Germany, June 2007, TEMA Marketing AG, Steel Institute VDEH, 690–697.
- Mintz B, Crowther DN: Int. Mater. Rev., 2010, 55, (3), 168–196.
- Phiu-on K, Heering C, Hirt G: ‘Hot workability of as-cast high manganese–high carbon steels’, Steel Res. Int., 2007, 78, 536–545.
- Kang SE, Tuling A, Banerjee JR, Gunawardana WD, Mintz B: ‘The hot ductility of TWIP steels’, Mater. Sci. Technol., 2011, 27, (1), 95–100.
- Tuling A, Lau I, Banerjee JR, Mintz B: ‘The hot ductility of Nb/V containing high Al, TWIP steels’, Mater. Sci. Technol., 2011, 27, (5), 909–915.
- Kim SK, Kim JS, Kim NJ: ‘Effect of B on the hot ductility of Nb-containing steels’, Metall. Mater. Trans. A, 2002, 33A, 701–704.
- Song SH, Guo AM, Shen DD, Yuan ZX, Liu J, Xu TD: ‘Effect of boron on the hot ductility of 2·25Cr1Mo steel’, Mater. Sci. Eng. A, 2003, A360, 96–100.
- Yamamato K, Suzuki HG, Ouna Y, Nodec N, Inoue T: ‘Formation mechanism and prevention of facial cracks of continuously cast steel slabs containing boron’, Tetsu-to-Hagane, 1987, 73, (1), 111–122.
- Chipres EL, Mejia I, Maldonado C, Bedolla-Jacuinde A, Cabrera JM: ‘Hot ductility behaviour of boron micro-alloyed steels’, Mater. Sci. Eng. A, 2007, 464–470.
- Chung IS, Cho SG: ‘Effect of cooling rate and strain rate on hot ductility of B steel’, J. Korean Inst. Metall. Mater., 1993, 31, 64–72.
- Chown LH, Cornish LA: ‘Investigation of hot ductility in Al-killed B steels’, Mater. Sci. Eng. A, 2008, A494, 263–275.
- Perrot-Simonetta MT, Kobylanski A: ‘Influence of trace elements on hot ductility of an ultra high purity invar alloy’, J. Phys. IV, 1995, 5, (7), C7-323–C7-334.
- Luo HW, Zhoo P, Zhang Y, Dong DJ: ‘Effect of B on hot ductility of low C low alloyed steel’, Mater. Sci. Technol., 2001, 17, 843–846.
- Hannerz NE: ‘Critical hot plasticity and transverse cracking in continuously slab casting with particular reference to composition’, Trans. Iron Steel. Inst. Jpn, 1985, 25, 149–158.
- Yue S: ‘The effect of boron on the hot ductility of Nb microalloyed steels’, ISIJ Int., 2006, 46, 91–598.
- Mejia I, Altamirano G, Bedolla-Jacuinde A, Cabrera JM: ‘Hot ductility behaviour of a low carbon advanced high strength steel (AHSS) microalloyed with boron’, Mater. Sci. Eng. A, 2011, A528, 4468–4474.
- Cho KC, Mun DJ, Kang MH, Lee JS, Park JK, Koo YM: ‘Effect of thermal cycle and N content on hot ductility of boron-bearing steel’, ISIJ, 2010, 50, 839–846.
- ‘Precipitation behaviour of complex B compounds in steels’, Nippon Steel technical report no. 21, Nippon Steel, Tokyo, Japan, 1983, 331–337.
- Abushosha R, Vipond R, Mintz B: ‘The influence of Ti on hot ductility of as-cast steels’, Mater. Sci. Technol., 1991, 7.613–7.621.
- Comineli O, Mintz B: ‘Influence of Ti on hot ductility of C–Mn–Al steels’, Mater. Sci. Technol., 1999, 15, 278–286.
- Comineli O, Abushosha R, Mintz B: ‘Influence of Ti and N on hot ductility of C–Mn–Nb–Al’, Mater. Sci. Technol., 1999, 15, 1058–1068.
- Kang SE, Banerjee JR, Mintz B: ‘The influence of S and AlN on hot ductility of high Al,TWIP steels’, Mater. Sci. Technol., 2012, 28, 589–596.
- Woda H, Pehlke RD: Metall. Mater. Trans. B, 1985, 16B, 815–822.
- Yue S, Jonas JJ, Mintz B: ‘Relationship between hot ductility and cracking during continuous casting of steel’, Proc. 13th Process Technology Conference, Nashville, Iron and Steel Society, Nashville, TN, USA, April 1995, pp. 45–52.
- Karlsson L, Norden H, Odelius H: ‘Non-equilibrium grain boundary segregation of boron in austenitic stainless steel – 1. Large scale segregation behaviour’, Acta Metall., 1988, 36, (1), 1–12.
- Zhang ZL, Lin QY, Yu ZS: ‘Non-equilibrium intergranular segregation in ultra low carbon steel’, Mater. Sci. Technol., 2000, 16, 305–308.
- Turkdogan ET: ‘Causes and effects of nitride and carbonitride precipitation in HSLA steels in relation to continuous casting’, Proc. AIME Steelmaking Conf., 1987, 70, 399–415.