Structure and properties of solid state diffusion bonding of 17-4PH stainless steel and titanium

References

• Kale G. B., Patil R. V. and Gawde P. S.: ‘Interdiffusion studies in titanium-304 stainless steel system’, J. Nucl. Mater., 1998, 257, 44–50.
   Web of Science ®Google Scholar
• Shiue R. K., Wu S. K. and Shiue J. Y.: ‘Infrared brazing of Ti–6Al–4V and 17-4 PH stainless steel with (Ni)/Cr barrier layer(s)’, Mater. Sci. Eng. A, 2008, A488, 186–194.
   Google Scholar
• K Shiue R., Wu S. K., Chan C. H. and Huang C. S.: ‘Infrared brazing of Ti–6Al–4V and 17-4 PH stainless steel with a nickel barrier layer’, Metall. Mater. Trans. A, 2006, 37A, 2207–2211.
   Web of Science ®Google Scholar
• C Church S. and Wild R. W.: ‘Diffusion bonding of steel to Ti–6Al–4V to produce hard wearing surface layers’, J. Vac. Sci. Technol. A, 1998, 16A, 1885–1889.
   Google Scholar
• Kundu S. and Chatterjee S.: ‘Interface microstructure and strength properties of diffusion bonded joints of titanium–Al interlayer–18Cr–8Ni stainless steel’, Mater. Sci. Eng. A, 2010, A527, 2714–2719.
   Google Scholar
• He P., Zhang J. H. and Li X. Q.: ‘Diffusion bonding of titanium alloy to stainless steel wire mesh’, Mater. Sci. Technol., 2001, 17, 1158–1162.
   Web of Science ®Google Scholar
• Torun O., Karabulut A., Baksan B. and Çelikyürek I.: ‘Diffusion bonding of AZ91 using a silver interlayer’, Mater. Des., 2008, 29, 2043–2046.
   Web of Science ®Google Scholar
• Can G. and Kocak M.: ‘Progress in joining of advanced materials’, Int. Mater. Rev., 1998, 43, 1–44.
   Web of Science ®Google Scholar
• Kundu S. and Chatterjee S.: ‘ Effect of temperature on formation of reaction products and strength properties of titanium and stainless steel joints using copper interlayer’, Mater. Sci. Technol. A, 2007, 23A, 368–373.
   Google Scholar
• He P., Yue X. and Zhang J. H.: ‘Hot pressing diffusion bonding of a titanium alloy to a stainless steel with an aluminum alloy interlayer’, Mater. Sci. Eng. A, 2008, A486, 171–176.
   Web of Science ®Google Scholar
• Kato H., Shibata M. and Yoshikawa K.: ‘Diffusion welding of Ti/Ti and Ti/stainless steel rods under phase transformation in air’, Mater. Sci. Technol., 1986, 2, 405–409.
   Web of Science ®Google Scholar
• Calvo F. A., Gomez De Salazar J. M., Urena A. and Carrion J. G.: J. Mater. Sci., 1992, 391, 74–82.
   Google Scholar
• Changing A. and Zhangpeng J.: ‘The evaluation of microstructure and diffusion paths in the titanium-steel explosion weld interface during heat treatment’, J. Less-Common Met., 1990, 162, 315–322.
   Google Scholar
• Liu H., Cao J., He P. and Feng J. C.: ‘Effect of hydrogen on diffusion bonding of commercially pure titanium and hydrogenated Ti6Al4V alloys’, Int. J. Hydrogen Energy, 2009, 34, 1108–1113.
   Web of Science ®Google Scholar
• Kundu S. and Chatterjee S.: ‘Effect of bonding temperature on interface microstructure and properties of titanium–304 stainless steel diffusion bonded joints with Ni interlayer’, Mater. Sci. Technol., 2006, 22, 1201–1207.
   Web of Science ®Google Scholar
• Eroglu M., Khan T. I. and Orhan N.: ‘Diffusion bonding between Ti–6Al–4V alloy and microduplex stainless steel with copper interlayer’, Mater. Sci. Technol., 2002, 18, 68–72.
   Web of Science ®Google Scholar
• Kurt B., Orhan N. and Kaya M.: ‘Interface characterisation of diffusion bonded Ti–6Al–4V alloy and austenitic stainless steel couple’, Mater. Sci. Technol., 2009, 25, 556–560.
   Web of Science ®Google Scholar
• Liu C. C., Ou C. L. and Shiue R. K.: ‘The microstructural observation and wettability study of brazing Ti–6Al–4V and 304 stainless steel using three braze alloys’, J. Mater. Sci., 2002, 37, 2225–2235.
   Web of Science ®Google Scholar
• Ferrante M. and Pigoretti E. V.: ‘Diffusion bonding of Ti–6Al–4V To AISI 316L stainless steel: mechanical resistance and interface microstructure’, J. Mater. Sci., 2002, 37, 2825–2833.
   Web of Science ®Google Scholar
• M Sheng G., Huang J. W., Qin B., Zhou B. and Qiu S. Y.: ‘An experimental investigation of phase transformation superplastic diffusion bonding of titanium alloy to stainless steel’, J. Mater. Sci., 2005, 40, 6385–6390.
   Web of Science ®Google Scholar
• Orhan N., Khan T. I. and Eroglu M.: ‘Diffusion bonding of microduplex stainless steel to Ti–6Al–4V’, Scr. Metall., 2001, 45, 441–446.
   Google Scholar
• Kurt B., Orhan N., Evin E. and Çalik A.: ‘Diffusion bonding between Ti–6Al–4V alloy and ferritic stainless steel’, Mater. Lett., 2007, 61, 1747–1750.
   Web of Science ®Google Scholar
• Qin B., M Sheng G., W Huang J., Zhou B., Qiu S. Y. and Li C.: ‘Phase transformation diffusion bonding of titanium alloy with stainless steel’, Mater. Charact., 2006, 56, 32–38.
   Web of Science ®Google Scholar
• ‘Annual book of ASTM standards’, ASTM, Philadelphia, PA, USA, 1997, 03·01, 87–89.
   Google Scholar
• Aleman B., Guitterrez I. and Urcola J. J.: ‘Interface microstructure in diffusion bonding of titanium alloy to stainless steel and low alloy steels’, Mater. Sci. Technol., 1993, 9, 633–641.
   Web of Science ®Google Scholar
• Massalski T. B.: ‘Binary alloy phase diagrams’, 2nd edn, Vol. 2, 1735; 1996, Materials Park, OH, ASM International.
   Google Scholar
• Villars P., Prince A. and Okamoto H.: ‘Handbook of ternary phase alloys’, 7; 1995, Materials Park, OH, ASM International.
   Google Scholar
• He P. and Liu D.: ‘Mechanism of forming interfacial intermetallic compounds at interface for solid state diffusion bonding of dissimilar materials’, Mater. Sci. Eng., 2006, 437, 430–435.
   Google Scholar
• Kundu S. and Chatterjee S.: ‘Diffusion bonding between commercially pure titanium and micro-duplex stainless steel’, Mater. Sci. Eng. A, 2008, A480, 316–322.
   Web of Science ®Google Scholar
• Kundu S., Roy D., Chatterjee S., Olson D. and Mishra B.: ‘Influence of interface microstructure on the mechanical properties of titanium/17-4 PH stainless steel solid state diffusion bonded joints’, Mater. Des., 2012, 37, 560–568.
   Web of Science ®Google Scholar
• Kundu S., Ghosh M., Laik A., Bhanumurthy K., Kale G. B. and Chatterjee S.: ‘Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer’, Mater. Sci. Eng. A, 2005, A407, 154–160.
   Web of Science ®Google Scholar
• Laik A., Gawde P. S., Bhanumurthy K. and Kale G. B.: ‘Characteristics of interdiffusion between 17-4PH steel and nickel’, Metall. Mater. Trans. A, 2008, 39A, 733–741.
   Web of Science ®Google Scholar