References
- Pemberton SR., Oberg EK, Dean J, Tsarouchas D, Markaki AE, Marston L and Clyne TW: ‘The fracture energy of metal fibre reinforced ceramic composites (MFCs)’, Compos. Sci. Technol., 2011, 71, (3), 266–275.
- Brady MP., Yamamoto Y, Santella ML and Pint B: ‘Effects of minor alloy additions and oxidation temperature on protective alumina scale formation in creep-resistant austenitic stainless steels’, Scr. Mater., 2007, 57, 1117–1120.
- Xu X, Zhang X, Chen G and Lu Z: ‘Improvement of high-temperature oxidation resistance and strength in alumina-forming austenitic stainless steels‘, Mater. Lett., 2011, 65, 3285–3288.
- Hsu H and Tsai W: ‘High temperature corrosion behavior of siliconized 310 stainless steel’, Mater. Chem. Phys., 2000, 64, 147–155.
- Merz M: ‘The oxidation resistance of fine-grained sputter-deposited 304 stainless steel’, Metall. Trans. A, 1979, 10A, 71–77.
- Zhang Y and Shores DA: ‘Cracking and spalling of oxide scale from 304 stainless steel at high temperatures’, J. Electrochem. Soc., 1994, 141, 1255–1260.
- Peraldi R and Pint BA: ‘Effect of Cr and Ni contents on the oxidation behavior of ferritic and austenitic model alloys in air with water vapor’, Oxid. Met., 2004, 61, (5–6), 463–483.
- Plaut RL, Herrera C, Escriba DM, Rios PR and Padilha AF: ‘A short review on wrought austenitic stainless steels at high temperatures: processing, microstructure, properties and performance’, Mater. Res., 2007, 10, 453–460.
- Tsai W and Huang K: ‘Microstructural aspect and oxidation resistance of an aluminide coating on 310 stainless steel’, Thin Solid Films, 2000, 366, 164–168.
- Karimi N, Riffard F, Rabaste F, Perrier S, Cueff R, Issartel C and Buscail H: ‘Characterization of the oxides formed at 1000°C on the AISI 304 stainless steel by X-ray diffraction and infrared spectroscopy’, Appl. Surf. Sci., 2008, 254, 2292–2299.
- Faiyadh F and Ai-Ausi M: ‘Effect of elevated temperature on splitting tensile strength of fibre concrete’, Int. J. Cem. Compos. Lightweight Concr., 1989, 11, (3), 175–178.
- Purkiss J: ‘Steel fibre reinforced concrete at elevated temperatures’, Int. J. Cem. Compos. Lightweight Concr., 1984, 6, (3), 179–184.
- Suurone J.-P, Kallonen A, Eik M, Puttonen J, Serimaa R and Herrmann H: ‘Analysis of short fibres orientation in steel fibre-reinforced concrete (SFRC) by X-ray tomography’, J. Mater. Sci., 2013, 48, 1358–1367.