1,059
Views
19
CrossRef citations to date
0
Altmetric
Original Articles

Effect of cold rolling on tensile properties and microstructure of high nitrogen alloyed austenitic steel

, , , , &
Pages 146-151 | Received 27 Aug 2013, Accepted 25 Sep 2013, Published online: 06 Dec 2013

References

  • Fréchard S., Redjaïmia A., Lach E. and Lichtenberger A.: ‘Mechanical behaviour of nitrogen-alloyed austenitic stainless steel hardened by warm rolling’, Mater. Sci. Eng. A, 2006, A415, 219–224.
  • Wang S., Yang K., Shan Y. and Li L.: ‘Plastic deformation and fracture behaviors of nitrogen-alloyed austenitic stainless steels’, Mater. Sci. Eng. A, 2008, A490, 95–104.
  • Chang B. and Zhang Z.: ‘Cyclic deformation behavior in a nitrogen-alloyed austenitic stainless steel in terms of the evolution of internal stress and microstructure’, Mater. Sci. Eng. A, 2012, A556, 625–632.
  • Hong C., Shi J., Sheng L., Cao W., Hui W. and Dong H.: ‘Effects of hot-working parameters on microstructural evolution of high nitrogen austenitic stainless steel’, J. Mater. Sci., 2011, 46, 5097–5103.
  • Milititsky M., Matlock D. K., Regully A., Dewispelaere N., Penning J. and Hanninen H.: ‘Impact toughness properties of nickel-free austenitic stainless steels’, Mater. Sci. Eng. A, 2008, A496, 189–199.
  • Pickering F.: ‘Physical metallurgy of stainless steel developments’, Int. Metall. Rev. Dec., 1976, 21, 227–268.
  • Milititsky M., De Wispelaere N., Petrov R., Ramos J. E., Reguly A. and Hänninen H.: ‘Characterization of the mechanical properties of low-nickel austenitic stainless steels’, Mater. Sci. Eng. A, 2008, A498, 289–295.
  • Wang S., Yang K., Shan Y. and Li L.: ‘Study of cold deformation behaviors of a high nitrogen austenitic stainless steel and 316 L stainless steel’, Acta Metall. Sinica, 2007, 43, 171–176.
  • Saller G., Spiradek-Hahn K., Scheu C. and Clemens H.: ‘Microstructural evolution of Cr–Mn–N austenitic steels during cold work hardening’, Mater. Sci. Eng. A, 2006, A427, 246–254.
  • Fréchard S., Redjaïmia A., Lach E. and Lichtenberger A.: ‘Dynamical behaviour and microstructural evolution of a nitrogen-alloyed austenitic stainless steel’, Mater. Sci. Eng. A, 2008, A480, 89–95.
  • Lach E., Anderson C., Schirm V. and Koerber G.: ‘Hypervelocity impact into a high strength and ductile steel alloy’, Int. J. Impact Eng., 2008, 35, 1625–1630.
  • Simmons J. W.: ‘Overview: high-nitrogen alloying of stainless steels’, Mater. Sci. Eng. A, 1996, A207, 159–169.
  • Liu S. Y., Liu D. Y. and Liu S. C.: ‘Transgranular fracture in low temperature brittle fracture of high nitrogen austenitic steel’, J. Mater. Sci., 2007, 42,7514–7519.
  • Ojima M., Adachi Y., Tomota Y., Ikeda K., Kamiyama T. and Katada Y.: ‘Work hardening mechanism in high nitrogen austenitic steel studied by in situ neutron diffraction and in situ electron backscattering diffraction’, Mater. Sci. Eng. A, 2009, A527, 16–24.
  • Ueji R., Kondo D., Takagi Y., Mizuguchi T., Tanaka Y. and Shinagawa K.: ‘Grain size effect on high-speed deformation of Hadfield steel’, J. Mater. Sci., 2012, 47, 7946–7953.
  • Di Schino A. and Kenny J.: ‘Grain refinement strengthening of a micro-crystalline high nitrogen austenitic stainless steel’, Mater. Lett., 2003, 57, 1830–1834.
  • Stolyarov V. V., Zhu Y. T., Alexandrov I. V., Lowe T. C. and Valiev R. Z.: ‘Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling’, Mater. Sci. Eng. A, 2003, A343, 43–50.
  • Bhav Singh B., Sivakumar K. and Balakrishna Bhat T.: ‘Effect of cold rolling on mechanical properties and ballistic performance of nitrogen-alloyed austenitic steels’, Int. J. Impact Eng., 2009, 36, 611–620.
  • Karaman I., Sehitoglu H., Maier H. and Chumlyakov Y.: ‘Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen’, Acta Mater., 2001, 49, 3919–3933.
  • Huang J. X., Ye X. N. and Xu Z.: ‘Effect of cold rolling on microstructure and mechanical properties of AISI 301LN metastable austenitic stainless steels’, J. Iron. Steel Res., 2012, 19, 59–63.
  • Hong C., Shi J., Sheng L., Cao W., Hui W. and Dong H.: ‘Effects of hot-working parameters on microstructural evolution of high nitrogen austenitic stainless steel’, Mater. Des., 2011, 32, 3711–3717.
  • Di Schino A., Kenny J., Mecozzi M. and Barteri M.: ‘Development of high nitrogen, low nickel, 18% Cr austenitic stainless steels’, J. Mater. Sci., 2000, 35, 4803–4808.
  • Kim Y., Nam S. and Kim S.: ‘Strain rate dependence of deformation behavior of high-nitrogen austenitic steels’, J. Mater. Process. Technol., 2007, 187, 575–577.
  • Wang J.: ‘Mechanical properties and microstructure evolution of cold-deformed high-nitrogen nickelfree austenitic stainless steel during annealing’, J. Wuhan Univ. Technol., 2012, 27, 830–835.
  • Tirumalasetty G., Van Huis M., Kwakernaak C., Sietsma J., Sloof W. and Zandbergen H.: ‘Deformation-induced austenite grain rotation and transformation in TRIP-assisted steel’, Acta Mater., 2012, 60, 1311–1321.
  • Das A., Chakraborti P., Tarafder S. and Bhadeshia H.: ‘Analysis of deformation induced martensitic transformation in stainless steels’, Mater. Sci. Technol., 2011, 27, 366–370.
  • Schuh C., Nieh T. and Iwasaki H.: ‘The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni’, Acta Mater., 2003, 51, 431–443.
  • Blicharski M. and Gorczyca S.: ‘Structural inhomogeneity of deformed austenitic stainless steel’, Met. Sci., 1978, 12, 303–312.
  • Gavriljuk V. G. and Berns H.: ‘High nitrogen steels: structure, properties, manufacture, applications’; 1999, Berlin, Springer.
  • Werner E.: ‘Solid solution and grain size hardening of nitrogen-alloyed austenitic steels’, Mater. Sci. Eng. A, 1988, A101, 93–98.
  • Duggan B., Hatherly M., Hutchinson W. and Wakefield P.: ‘Deformation structures and textures in cold-rolled 70:30 brass’, Met. Sci., 1978, 12, 343–351.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.