References
- Ion JC: ‘Laser processing of engineering materials’; 2005, Amsterdam, Elsevier.
- Dong H (ed.): ‘Surface engineering of light alloys – aluminium, magnesium and titanium alloys’; 2010, Oxford, Wood Publishing Ltd.
- Toyserkani AKE and Corbin S: ‘Laser cladding’; 2005, Boca Raton, FL, CRC Press LLC.
- Pfohl C and Rie KT: ‘Wear-resistant PACVD coatings of the system Ti–B–N’, Surf. Coat. Technol., 1999, 116–119, 911–915.
- Oh J and Lee S: ‘Correlation of microstructure with hardness and fracture properties of (TiC,SiC)/Ti–6Al–4V surface composites fabricated by high-energy electron-beam irradiation’, Surf. Coat. Technol., 2004, 179, 340–348.
- Mridha S, Ong HS, Poh LS and Cheang P: ‘Intermetallic coatings produced by GTAW surface melting’, J. Mater. Process. Technol., 2001, 113, 516–620.
- Buytoz S, Ulutan M and Yildirim MM: ‘Dry sliding wear behavior of GTAW welding clad WC composite coatings’, Appl. Surf. Sci., 2005, 252, 1313–1323.
- Ding W, Jiang H, Zeng X, Li D and Yao S: ‘Microstructure and mechanical properties of GTA surface modified composite layer on magnesium alloy AZ31 with SiCP’, J. Alloys Compd, 2007, 429, 233–241.
- Mridha S: ‘Titanium nitride layer formation by TIG surface melting in reactive environment’, J. Mater. Process. Technol., 2005, 168, 471–477.
- Mridha S, Md Idriss AN, Maleque MA, Suryanto and Souad A: ‘Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc’, IJMME, 2012, 7, (1), 48–53.
- Xu G, Kutsuna M, Liu Z and Yamada K: ‘Comparison between diode laser and GTAW cladding of Co-based alloys on the SUS403 stainless steel’, Surf. Coat. Technol., 2006, 201, 1138–1144.
- Kaul R, Ganesh P, Tripathi P, Nandedkar RV and Nath AK: ‘Comparison of laser and gas tungsten arc weldments of stabilized 17 wt-%Cr ferritic stainless steel’, Mater. Manuf. Processes, 2003, 18, (4), 563–580.
- Vedani M: ‘Microstructural evolution of tool steels after Nd-YAG laser repair welding’, J. Mater. Sci., 2004, 39, (1), 241–249.
- Chokethawai K: ‘Microstructural evolution in Fe–Cr–B based alloy powder and thermally sprayed coatings and their wear performance’, PhD thesis, University of Nottingham, Nottingham, UK, 2010.
- Branagan DJ: ‘development of nanostructured coatings for enhanced corrosion performance’, Adv. Mater. Processes, 2011, 169, (2), 33–34.
- http://nanosteelco.com/
- Chokethawai K, McCartney DG and Shipway PH: ‘Microstructure evolution and thermal stability of an Fe-based amorphous alloy powder and thermally sprayed coatings’, J. Alloy Compd, 2009, 480, (2), 351–359.
- Balla VK and Bandyopadhyay A: ‘Laser processing of Fe-based bulk amorphous alloy’, Surf. Coat. Technol., 2010, 205, (7), 2661–2667.
- Schneider M: ‘Laser cladding with powder, effect of some machining parameters on clad properties’, 1998, PhD thesis, University of Twente, Enschede, The Netherlands.
- Md Idriss AN, Mridha S and Baker TN: ‘Laser and GTAW torch processing of Fe–Cr–B coatings on steel: Part I – melt features’, Mater. Sci. Technol., 2014, 35, (10), 1209–1213.
- Schubert E, Seefeld T, Rinn A and Sepold G: ‘Laser beam cladding: a flexible tool for local surface treatment and repair’, J. Therm. Spray Technol., 1999, 8, (4), 590–596.
- Easterling KE: ‘Introduction to physical metallurgy of welding’; 1992, London, Butterworth-Heinemann.
- Mridha S and Baker TN: ‘Metal matrix composite layer formation with 3 micron SiCp powder on IMI318 titanium alloy surfaces through laser treatment’, J. Mater. Process. Technol., 1997, 63, 432–437.
- Mridha S and Ng BS: ‘Addition of ceramic particles to GTAW melted titanium surfaces’, Surf. Eng., 1999, 15, (3), 210–215.
- Mridha S and Baker TN: ‘Incorporation of 3 μm SiCp into titanium surfaces using 2·8 kW laser beam of 186 and 373 MJ m−2 energy densities in a nitrogen environment’, J. Mater. Process. Technol., 2007, 185, 38–45.
- Dyuti S, Mridha S and Shaha SK: ‘Wear behavior of modified surface layer produced by TIG melting of preplaced Ti powder in nitrogen environment’, Adv. Mater. Res., 2011, 264–265, 1427–1432.
- Mridha S, N.Md Idriss A and Baker TN: ‘Incorporation of TiC particulates on AISI 4340 low alloy steel surfaces via tungsten inert gas arc melting’, Adv. Mater. Res., 2012, 445, 655–660.
- Kurz W: ‘Fundamentals of solidification’, 3rd rev. edn.; 1989, Dürnten, Trans Tech. Publication Ltd.
- Colaco R, Carvalho T and Vilar R: ‘Laser cladding of stellite 6 on steel substrates’, High Temp. Chem. Processes, 1994, 3, (1), 21–29.
- Li M.-X, He Y.-Z and Sun G.-X: ‘Laser cladding Co-based alloy/SiCp composite coatings on IF steel’, Mater. Des., 2004, 25, 355–358.