References
- Chawla N and Chawla KK: ‘Metal matrix composites’, 2nd edn; 2013, New York, Springer.
- Chawla KK: ‘Thermal cycling of copper matrix-tungsten fiber composites: A metallographic study’, Metallography, 1973, 6, 155–169.
- Chawla KK: ‘Grain boundary cavitation and sliding in copper/tungsten composites due to thermal stresses’, Philos. Mag., 1973, 28, 401–413.
- Kwei LK and Chawla KK: ‘Thermal-mechanical fatigue behaviour of alumina fibre/aluminium-lithium composite’, J. Mater. Sci., 1992, 27, 1101–1106.
- Xu ZR, Chawla KK, Wolfenden A, Neuman A, Liggett GM and Chawla N: ‘Stiffness loss and density decrease due to thermal cycling in an alumina fiber/magnesium alloy composite’, Mater. Sci. Eng. A, 1995, A203, 75–80.
- Durieux S, Buffiere JY, Lormand G, Rapoport A and Vincent A: ‘Enhanced plasticity in metal matrix composites during thermal cycling under load’, Mater. Sci. Eng. A, 1997, A234–A236, 953–957.
- Carreno-Morelli E, Chawla N and Schaller R: ‘Thermo-mechanical characterization of 2080 Al/SiCP composites by mechanical spectroscopy’, J. Mater. Sci. Lett., 2001, 20, 163–165.
- Williams JJ, Chapman NC, Jakkali V, Tanna VA, Chawla N, Xiao X and De Carlo F: ‘Characterization of damage evolution in SiC particle reinforced Al alloy matrix composites by in situ x-ray synchrotron tomography’, Metall. Mater. Trans. A, 2011, 42A, 2999–3005.
- Williams JJ, Flom Z, Amell AA, Chawla N, Xiao X and De Carlo F: ‘Damage Evolution in SiC particle reinforced Al alloy matrix composites by X-ray synchrotron tomography’, Acta Mater., 2010, 58, 6194–6205.
- Maire E, Zhou S, Adrien J and Dimichiel M: ‘Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography’, Eng. Fract. Mech., 2011, 78, 2679–2690.
- Guvenilir A, Breunig TM, Kinney JH and Stock SR: ‘Direct observation of crack opening as a function of applied load in the interior of a notched tensile sample of Al-Li 2090’, Acta Mater., 1997, 45, 1977–1987.
- Withers PJ and Preuss M: ‘Fatigue and damage in structural materials studied by X-ray tomography’, Annu. Rev. Mater. Res., 2012, 42, 81–103.
- Buffiere J.-Y, Maire E, Cloetens P, Lormand G and Fougeres R: ‘Characterization of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography’, Acta Mater., 1999, 47, 1613–1625.
- Babout L, Maire E, Buffiere JY and Fougeres R: ‘Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites’, Acta Mater., 2001, 49, 2055–2063.
- Williams JJ, Yazzie KE, Padilla E, Chawla N, Xiao X and De Carlo F: ‘Understanding fatigue crack growth in aluminum alloys by in situ X-ray synchrotron tomography’, Int. J. Fatigue, 2013, 57, 79–85.
- Williams JJ, Yazzie KE, Phillips NC, Chawla N, Xiao X, De Carlo F, Iyyer N and Kittur M: ‘On the correlation between fatigue striation spacing and crack growth rate: A three-dimensional (3-D) X-ray synchrotron tomography study’, Metall. Mater. Trans. A, 2011, 42A, 3845–3847.
- Khor KH, Buffiere JY, Ludwig W, Toda H, Ubhi HS, Gregson PJ and Sinclair I: ‘In situ high resolution synchrotron x-ray tomography of fatigue crack closure micromechanisms’, J. Phys. Condens. Matter., 2004, 16, S3511–S3515.
- Singh SS, Williams JJ, Xiao X, De Carlo F and Chawla N: ‘In situ three dimensional (3D) X-ray synchrotron tomography of corrosion fatigue in Al7075 alloy’, in ‘Fatigue of materials II: advances and emergences in understanding’, 17–25; 2012, Hoboken, NJ, John Wiley & Sons, Inc.
- Singh SS, Williams JJ, Hruby P, Xiao X, De Carlo F and Chawla N: ‘In situ experimental techniques to study mechanical behavior of materials using X-ray synchrotron tomography’, Integr. Mater. Manufac. Innov., 2014, 3, (1), 9.
- Pyzalla A, Camin B, Lehrer B, Wichert M, Koch A, Zimnik K, Boller E and Reimers W: ‘In-situ observation of creep damage in Al-Al2O3 MMCs by synchrotron X-ray tomography’, International Centre for Diffraction Data, 2006, 1097–2102
- Issac A, Sketa F, Reimers W, Caminb B, Sauthoff G and Pyzalla AR: ‘In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography’, Mater. Sci. Eng. A, 2008, A478, 108–118.
- Chawla N, Jones J, Andres C and Allison J: ‘Effect of SiC volume fraction and particle size on the fatigue resistance of a 2080 Al/SiC p composite’, Metall. Mater. Trans. A, 1998, 29A, 2843–2854.
- Cloetens P, Ludwig W, Baruchel J, Van Dyck D, Van Landuyt J, Guigay JP and Schlenker M: ‘Holotomography: Quantitative phase tomography with micrometer resolution using hard synchrotron radiation X-rays’, Appl. Phys. Lett., 1999, 75, 2912.
- Padilla E, Jakkali V, Jiang L and Chawla N: ‘Quantifying the effect of porosity on the evolution of deformation and damage in Sn-based solder joints by X-ray microtomography and microstructure-based finite element modeling’, Acta Mater., 2012, 60, 4017–4026.
- Rézai-Aria F, Liechti T and Gagnon G: ‘Thermal cycling behavior of a pure Al-15% Saffil MMC’, Scr. Metall. Mater., 1993, 28, 587–592.
- Chawla KK and Metzger M: ‘Initial dislocation distributions in tungsten fibre-copper composites’, J. Mater. Sci., 1972, 7, 34–39.
- Prangnell PB, Downes T, Stobbs WM and Withers PJ: ‘The deformation of discontinuously reinforced MMCs. 1. The initial yielding behavior’, Acta Metall. Mater., 1994, 42, 3425–2436.
- Dutta I and Bourell DL: ‘A theoretical and experimental study of aluminium alloy 6061-SiC metal matrix composites to identify the operative mechanism for accelerated aging’, Mater. Sci. Eng. A, 1989, A112, 67–77.