Steady and unsteady state peritectic solidification

References

• Nassar H and Fredriksson H: ‘On peritectic reactions and transformations in low-alloy steels’, Metall. Mater. Trans. A, 2010, 41A, 2776–2783.
   Web of Science ®Google Scholar
• Tuling A, Banerjee JR and Mintz B: ‘Influence of peritectic phase transformation on hot ductility of high aluminium TRIP steels containing Nb’, Mater. Sci. Technol., 2011, 11, 1724–1731.
   Google Scholar
• Liu DM, Li XZ, Su YQ, Peng P, Luo LS, Guo JJ and Fu HZ: ‘Secondary dendrite arm migration caused by temperature gradient zone melting during peritectic solidification’, Acta Mater., 2012, 60, 2679–2688.
   Web of Science ®Google Scholar
• Kohler F, Germond L, Wagnière JD and Rappaz M: ‘Peritectic solidification of Cu–Sn alloys: microstructural competition at low speed’, Acta Mater., 2009, 57, 56–68.
   Web of Science ®Google Scholar
• Liu DM, Li XZ, Su YQ, Luo LS, Zhang B, Guo JJ and Fu HZ: ‘Directional solidification of Cu–20Sn alloy at low speed: from peritectic coupled growth to banding’, Mater. Lett., 2011, 65, 1628–1631.
   Web of Science ®Google Scholar
• Liu DM, Li XZ, Su YQ, Luo LS, Zhang B, Chen RR, Guo JJ and Fu HZ: ‘An analysis of non-equilibrium peritectic reaction driven by solute diffusion under a temperature gradient’, J. Cryst. Growth, 2011, 334, 195–199.
   Web of Science ®Google Scholar
• Böyüka U, Kaya H, Çadırlı E, Maraslı N and Ülgen A: ‘Investigation of the effect of solidification processing parameters on microhardness and determination of thermo–physical properties in the Zn–Cu peritectic alloy’, J. Alloys Compd, 2010, 491, 143–148.
   Web of Science ®Google Scholar
• Ma D, Li Y, Ng SC and Jones H: ‘Unidirectional solidification of Zn-rich Zn–Cu peritectic alloys—I. Microstructure selection’, Acta Mater., 2000, 48, 419–431.
   Web of Science ®Google Scholar
• Brito C, Siqueira CA, Spinelli JE and Garcia A: ‘Cellular growth during the transient directional solidification of Zn-rich Zn Cu monophasic and peritectic alloys’, J. Phys. Chem. Solids, 2012, 73, 1173–1181.
   Web of Science ®Google Scholar
• Su YQ, Luo LS, Guo JJ, Li XZ and Fu HZ: ‘Spacing selection of cellular peritectic coupled growth during directional solidification of Fe–Ni peritectic alloys’, J. Alloys Compd, 2009, 474, L14–L17.
   Web of Science ®Google Scholar
• Liu YC, Yang GC, Guo XF, Huang J and Zhou YH: ‘Coupled growth behavior in the rapidly solidified Ti–Al peritectic alloys’, J. Cryst. Growth, 2001, 222, 645–654.
   Web of Science ®Google Scholar
• Su YQ, Liu C, Li XZ, Guo JJ, Li BS, Jia J and Fu HZ: ‘Microstructure selection during the directionally peritectic solidification of Ti–Al binary system’, Intermetallics, 2005, 13, 267–274.
   Web of Science ®Google Scholar
• Hunziker O and Kurz W: ‘Directional solidification and phase equilibria in the Ni–Al system’, Metall. Mater. Trans. A, 1999, 30A, 3167–3175.
   Web of Science ®Google Scholar
• Yasuda H, Notake N, Tokieda K and Ohnaka I: ‘Periodic structure during unidirectional solidification for peritectic Cd–Sn alloys’, J. Cryst. Growth, 2000, 210, 637–645.
   Web of Science ®Google Scholar
• Hu XW, Li SM, Ai FR and Yan H: ‘Banding structure formation during directional solidification of Pb–Bi peritectic alloys’, Trans. Nonferrous Met. Soc. China, 2012, 22, 2131–2138.
   Web of Science ®Google Scholar
• Lo TS, Dobler S, Plapp M, Karma A and Kurz W: ‘Two-phase microstructure selection in peritectic solidification: from island banding to coupled growth’, Acta Mater., 2003, 51, 599–611.
   Web of Science ®Google Scholar
• Luo LS, Su YQ, Guo JJ, Li XZ, Li SM, Zhong H, Liu L and Fu HZ: ‘Peritectic reaction and its influences on the microstructures evolution during directional solidification of Fe–Ni alloys’, J. Alloys Compd, 2008, 461, 121–127.
   Web of Science ®Google Scholar
• Busse P and Meissen F: ‘Coupled growth of the properitectic alpha- and peritectic gamma-phases in binary titanium aluminides’, Scr. Mater., 1997, 36, 653–658.
   Web of Science ®Google Scholar
• Cai ZZ and Zhu MY: ‘Thermo-mechanical behavior of peritectic steel solidifying in slab continuous casting mold and a new mold taper design’, ISIJ Int., 2013, 53, 1818–1827.
   Web of Science ®Google Scholar
• Emi T and Fredriksson H: ‘High-speed continuous casting of peritectic carbon steels’, Mater. Sci. Eng. A, 2005, A413–A414, 2–9.
   Web of Science ®Google Scholar
• Xu W, Ma D, Feng YP and Li Y: ‘Observation of lamellar structure in a Zn-rich Zn–6·3at% Ag hyper-peritectic alloy processed by rapid solidification’, Scr. Mater., 2001, 44, 631–636.
   Web of Science ®Google Scholar
• Shcherbakov GI, David SA and Brody HD: ‘Growth of Pb–Bi peritectic alloys at moderate and high values of G/R’, Scr. Metall. Mater., 1974, 8, 1239–1244.
   Google Scholar
• Hu XW, Li SM, Gao SF, Liu L and Fu HZ: ‘Effect of melt convection on primary dendrite arm spacing in directionally solidified Pb–26%Bi hypo-peritectic alloys’, Trans. Nonferrous Met. Soc. China, 2011, 21, 65–71.
   Web of Science ®Google Scholar
• Hu XW, Li SM, Gao SF, Liu L and Fu HZ: ‘Peritectic transformation and primary α-dendrite dissolution in directionally solidified Pb–26%Bi alloy’, J. Alloys Compd, 2010, 501, 110–114.
   Web of Science ®Google Scholar
• Hu XW, Li SM, Chen WJ, Gao SF, Liu L and Fu HZ: ‘Primary dendrite arm spacing during unidirectional solidification of Pb–Bi peritectic alloys’, J. Alloys Compd, 2009, 484, 631–636.
   Web of Science ®Google Scholar
• Hu XW, Yan H, Chen WJ, Li SM and Fu HZ: ‘Effect of sample diameter on primary and secondary dendrite arm spacings during directional solidification of Pb–26wt.%Bi hypo-peritectic alloy’, Rare Met., 2011, 30, 424–431.
   Web of Science ®Google Scholar
• Santos WLR, Brito C, Quaresma JMV, Spinelli JE and Garcia A: ‘Plate-like cell growth during directional solidification of a Zn–20wt%Sn high-temperature lead-free solder alloy’, Mater. Sci. Eng. B, 2014, 182B, 29–36.
   Web of Science ®Google Scholar
• Rosa DM, Spinelli JE, Ferreira IL and Garcia A: ‘Cellular/dendritic transition and microstructure evolution during transient directional solidification of Pb–Sb alloys’, Metall. Mater. Trans. A, 2008, 39A, 2161–2174.
   Web of Science ®Google Scholar
• Silva BL, Cheung N, Garcia A and Spinelli JE: ‘Thermal parameters, microstructure, and mechanical properties of directionally solidified Sn–0·7 wt.%Cu solder alloys containing 0 ppm to 1000 ppm Ni’, J. Electron. Mater., 2013, 42, 179–191.
   Web of Science ®Google Scholar
• Moura ITL, Silva CLM, Cheung N, Goulart PR, Garcia A and Spinelli JE: ‘Cellular to dendritic transition during transient solidification of a eutectic Sn–0·7 wt%Cu solder alloy’, Mater. Chem. Phys., 2012, 132, 203–209.
   Web of Science ®Google Scholar
• Silva AP. Spinelli JE and Garcia A: ‘Microstructural evolution during upward and downward transient directional solidification of hypomonotectic and monotectic Al–Bi alloys’, J. Alloys Compd, 2009, 480, 485–493.
   Web of Science ®Google Scholar
• Silva AP, Freitas ES, Goulart PR, Garcia A and Spinelli JE: ‘On the growth of the minority phase during downward transient directional solidification of hypomonotectic and monotectic Al Pb alloys’, J. Mater. Sci., 2012, 47, 5581–5589.
   Web of Science ®Google Scholar
• Silva AP, Goulart PR, Garcia A and Spinelli JE: ‘Microstructural development during transient directional solidification of a hypomonotectic Al–In alloy’, Philos. Mag. Lett., 2012, 92, 442–450.
   Web of Science ®Google Scholar
• Spinelli JE, Cheung N and Garcia A: ‘On array models theoretical predictions versus measurements for the growth of cells and dendrites in the transient solidification of binary alloys’, Philos. Mag., 2011, 91, 1705–1723.
   Web of Science ®Google Scholar
• Brito C, Siqueira CA, Spinelli JE and Garcia A: ‘Effects of cell morphology and macrosegregation of directionally solidified Zn-rich Zn–Cu alloys on the resulting microhardness’, Mater. Lett., 2012, 80, 106–109.
   Web of Science ®Google Scholar
• Dias M, Brito C, Bertelli F and Garcia A: ‘Cellular growth of single-phase Zn–Ag alloys unidirectionally solidified’, Mater. Chem. Phys., 2014, 143, 895–899.
   Web of Science ®Google Scholar
• Hunt JD: ‘Solidification and casting of metals’, Proceedings of the International Conference on Solidification and Casting of Metals, London, UK, 1979, The Metals Society, 3–9.
   Google Scholar
• Kurz W and Fisher JD: ‘Dendrite growth at the limit of stability: tip radius and spacing’, Acta Metall. Mater., 1981, 29, 11–20.
   Google Scholar
• Trivedi R: ‘Interdendritic spacing: II. A comparison of theory and experiments’, Metall. Mater. Trans. A, 1984, 15A, 977–982.
   Web of Science ®Google Scholar
• Bouchard D and Kirkaldy JS: ‘Prediction of dendrite arm spacings in unsteady and steady state heat flow of unidirectionally solidified binary alloys’, Metall. Mater. Trans. B, 1997, 28B, 651–663.
   Web of Science ®Google Scholar
• Hunt JD and Lu SZ: ‘Numerical modeling of cellular/dendritic array growth: spacing and structure predictions’, Metall. Mater. Trans. A, 1996, 27A, 611–623.
   Web of Science ®Google Scholar
• Ma D, Xu W, Ng CS and Li ZY: ‘On secondary dendrite arm coarsening in peritectic solidification’, Mater. Sci. Eng. A, 2005, A390, 52–62.
   Web of Science ®Google Scholar
• Tourret D and Karma A: ‘Multiscale dendritic needle network model of alloy solidification’, Acta Mater., 2013, 61, 6474–6491.
   Web of Science ®Google Scholar
• Bergeon N, Tourret D, Chen L, Debierre J.-M, Guérin R, Ramirez A, Billia B, Karma A and Trivedi R: ‘Spatiotemporal dynamics of oscillatory cellular patterns in three-dimensional directional solidification’, Phys. Rev. Lett., 2013, 110, 226102-1–226102-5.
   Web of Science ®Google Scholar
• Perovic DD, Snugovsky L, Snugovsky P and Rutter JW: ‘Reactions in Sn corner of Cu–Sn–Zn alloy system’, Mater. Sci. Technol., 2012, 28, 120–123.
   Web of Science ®Google Scholar
• Zhang XF, Komizo Y, Yokota T, Yasuda K and Oi K: ‘In-situ observations of phase transformations during C Mn Al steel weld solidification’, Mater. Sci. Technol., 2013, 29, 1363–1372.
   Web of Science ®Google Scholar
• Karma A, Rappel WJ, Fuh BC and Trivedi R: ‘Model of banding in diffusive and convective regimes during directional solidification of peritectic systems’, Metall. Mater. Trans. A, 1996, 29A, 1457–1470.
   Google Scholar
• Gündüz M, Kaya H, Çardili E, Marasli N, Keslioglu K and Saatçi B: ‘Effect of solidification processing parameters on the cellular spacings in the Al–0·1 wt% Ti and Al–0·5wt% Ti alloys’, J. Alloys Compd, 2007, 439, 114–127.
   Web of Science ®Google Scholar
• Quaresma JMV, Santos CA and Garcia A: ‘Correlation between unsteady-state solidification conditions, dendrite spacings, and mechanical properties of Al–Cu alloys’, Metall. Mater. Trans. A, 2000, 31A, 3167–3178.
   Web of Science ®Google Scholar