References
- Masuyama F, Iseda A, Sawaragi Y and Yokoyama T: ‘Development of tungsten strengthened low alloy steel with improved weldability’, in ‘Service experience and reliability improvement: nuclear fossil and petrochemical plants’, (ed. Bamford W H et al.), 141–146; 1994, Minneapolis, MN, American Society of Mechanical Engineers.
- ‘2·25Cr–1·6W–V–Cb material’, Code Case 2199, ASME, New York, USA, 2012.
- Masuyama F and Mitsuura H: ‘High strength heat-resistant low alloy steels’, US patent no. 5,084,238, 28 January 1992.
- Iseda A, Sawaragi Y, Masuyama F and Yokoyama T: ‘Low-alloy heat-resistant steel having improved creep strength and toughness’, US patent no. 5,211,909, 18 May 1993.
- Iseda A, Sawaragi Y, Masuyama F and Yokoyama T: ‘Low-chromium ferritic heat-resistant steel with improved toughness and creep strength’, US patent no. 5,407,635, 18 April 1995.
- Komai N, Masuyama F, Yokoyama T, Hirata H, Kawano K and Kan T: ‘High strength, low alloy, heat resistant steel’, US patent no. 6,379,611, 30 April 2002.
- ‘Relationship between alloy chemistry, hardenability, and creep behavior of Code Case 2199 (T23)’, Report no. 1024753, Electric Power Research Institute, Palo Alto, CA, USA, 2011.
- Poli A, Rosellini C, Bertoni A and Liberati G: ‘Fabrication and weldability of grade 23 tubing and piping’, Proc. 1st Int. Conf. on ‘Super high strength steels’, Rome, Italy, November 2005, Associazione Italiana Di Metallurgia, 1–12.
- Valliant JC, Vandenberghe B, Zakine C, Gabrel J and Bendick W: ‘The T23/P23 Book’, 17; 2006, Boulogne-sur-Mer, Vallourec and Mannesmann Tubes.
- Laarmann A: ‘New CCT-diagrams for grade T23 according to ASME Code Case 2199-4’, Presented to the ASME SG-SFA (sub group on strength of ferrous alloys), San Diego, CA, USA, May 2009, ASME, 1–14.
- Komai N, Imazato T and Masuyama F: ‘Continuously cooled microstructure and creep rupture strength of low C–2·25Cr–1·6W–V–Nb steel’, ISIJ Int. Suppl., 2001, 41, S91–S96.
- Masuyama F: ‘T23 (Code case 2199) specification and properties’, Presented to the ASME SG-SFA (sub group on strength of ferrous alloys), Montreal, Canada, February 2009, ASME, 1–35.
- ‘Standard practice for quantitative measurement and reporting of hypoeutectoid carbon and low-alloy steel phase transformation’, A1033-10, ASTM, West Conshohocken, PA, USA, 2010.
- Yang HS and Bhadeshia HKDH: ‘Uncertainties in dilatometric determination of martensite start temperature’, Mater. Sci. Technol., 2007, 23, 556–560.
- ‘Standard test method for Knoop and Vickers hardness of materials’, E384-11, ASTM, West Conshohocken, PA, USA, 2011.
- Siefert JA, Shingledecker JP and Parker JD: ‘Optimization of Vickers hardness parameters for micro and macro indentation of grade 91 steel,’ J. Test. Eval., 2013, 41, 778–787.