Novel Ti based metal matrix composites reinforced with Al–Cr–Fe quasicrystals approximants

References

• Boyer RR: ‘An overview on the use of titanium in the aerospace industry’, Mater. Sci. Eng. A, 1996, A213, (1–2), 103–114.
   Web of Science ®Google Scholar
• Dong H and Bell T: ‘Enhanced wear resistance of titanium surfaces by a new thermal oxidation treatment’, Wear, 2000, 238, (2), 131–137.
   Web of Science ®Google Scholar
• Christou A and Crider JF: ‘The strengthening of Ti-55 at. % Ni by formation of a Ti2Ni3 intermetallic phase’, J. Mater. Sci., 1972, 7, (4), 479–480.
   Web of Science ®Google Scholar
• Wang K: ‘The use of titanium for medical applications in the USA’, Mater. Sci. Eng. A, 1996, 213, (1–2), 134–137.
   Web of Science ®Google Scholar
• Long M and Rack HJ: ‘Titanium alloys in total joint replacement—a materials science perspective’, Biomaterials, 1998, 19, (18), 1621–1639.
   PubMed Web of Science ®Google Scholar
• Zhou C, Cai F, Kong J, Gong S and Xu H: ‘A study on the tribological properties of low-pressure plasma-sprayed Al–Cu–Fe–Cr quasicrystalline coating on titanium alloy’, Surf. Coat. Technol., 2004, 187, (2–3), 225–229.
   Web of Science ®Google Scholar
• Shechtman D, Blech I, Gratias D and Cahn JW: ‘Metallic phase with long-range orientational order and no translational symmetry’, Phys. Rev. Lett., 1984, 53, (20), 1951–1953.
   Web of Science ®Google Scholar
• Levine D and Steinhardt PJ: ‘Quasicrystal. I. Defination and structure’, Phys. Rev. B, 1986, 34B, (2), 20.
   Google Scholar
• Dubois J.-M: ‘New prospects from potential applications of quasicrystalline materials’, Mater. Sci. Eng. A, 2000, 294–296, 4–9.
   Web of Science ®Google Scholar
• Huttunen-Saarivirta E: ‘Microstructure, fabrication and properties of quasicrystalline Al–Cu–Fe alloys: a review’, J. Alloys Compd, 2004, 363, (1–2), 154–178.
   Web of Science ®Google Scholar
• Dubois J, Kang S and Stebut JV: ‘Quasicrystalline low-friction coatings’, J. Mater. Sci. Lett., 1991, 10, (9), 537–541.
   Google Scholar
• Tanabe T, Kameoka S and Tsai A: ‘Evolution of microstructure induced by calcination in leached Al–Cu–Fe quasicrystal and its effects on catalytic activity’, J. Mater. Sci., 2011, 46, (7), 2242–2250.
   Web of Science ®Google Scholar
• Grushko B and Velikanova TY: ‘Stable and metastable quasicrystals in Al-based alloy systems with transition metals’, J. Alloys Compd, 2004, 367, (1–2), 58–63.
   Web of Science ®Google Scholar
• Lang CI, Shechtman D and Gonzalez E: ‘Friction and wear properties of quasi-periodic material coatings’, Bull. Mater. Sci., 1999, 22, (3), 189–192.
   Web of Science ®Google Scholar
• Bihar Ž, Bilušić A, Lukatela J, Smontara A, Jeglič P, McGuiness PJ, Dolinšek J, Jagličić Z, Janovec J, Demange V and Dubois JM: ‘Magnetic, electrical and thermal transport properties of Al–Cr–Fe approximant phases’, J. Alloys Compd, 2006, 407, (1–2), 65–73.
   Web of Science ®Google Scholar
• Tokita M: ‘Mechanism of spark plasma sintering’, Proc. NEDO Int. Symp. on ‘Functionally graded materials’, 1999, Japan.
   Google Scholar
• Mamedov V: ‘Spark plasma sintering as advanced PM sintering method’, Powder Metall., 2002, 45, (4), 322–328.
   Web of Science ®Google Scholar
• Khor KA, Cheng KH, Yu LG and Boey F: ‘Thermal conductivity and dielectric constant of spark plasma sintered aluminum nitride’, Mater. Sci. Eng. A, 2003, A347, (1–2), 300–305.
   Web of Science ®Google Scholar
• Demirskyi D, Borodianska H, Agrawal D, Ragulya A, Sakka Y and Vasylkiv O: ’Peculiarities of the neck growth process during initial stage of spark-plasma, microwave and conventional sintering of WC spheres’, J. Alloys Compd, 2012, 523, 1–10.
   Web of Science ®Google Scholar
• Zhaohui Z, Fuchi W, Lin W, Shukui L and Osamu S: ‘Sintering mechanism of large-scale ultrafine-grained copper prepared by SPS method’, Mater. Lett., 2008, 62, (24), 3987–3990.
   Web of Science ®Google Scholar
• Toyofuku N, Kuramoto T, Imai T, Ohyanagi M and Munir Z: ‘Effect of pulsed DC current on neck growth between tungsten wires and tungsten plates during the initial stage of sintering by the spark plasma sintering method’, J. Mater. Sci., 2012, 47, (5), 2201–2205.
   Web of Science ®Google Scholar
• Misawa T, Shikatani N, Kawakami Y, Enjoji T, Ohtsu Y and Fujita H: ‘Observation of internal pulsed current flow through the ZnO specimen in the spark plasma sintering method’, J. Mater. Sci., 2009, 44, (6), 1641–1651.
   Web of Science ®Google Scholar
• Chen W, Anselmi-Tamburini U, Garay JE, Groza JR and Munir ZA: ‘Fundamental investigations on the spark plasma sintering/synthesis process: I. Effect of dc pulsing on reactivity’, Mater. Sci. Eng. A, 2005, A394, (1–2), 132–138.
   Web of Science ®Google Scholar
• Dong C: ‘The δ-Al4Cu9 phase as an approximant of quasicrystals’, Philos. Mag. A, 1996, A73, (6), 1519–1528.
   Google Scholar
• Mabuchi H, Nagayama H, Tsuda H, Matsui T and Morii K: ‘Formation of ternary L12 intermetallic compound and phase relation in the Al-Ti-Fe system’, JIM Mater. Trans., 2000, 41, (6), 733–738.
   Web of Science ®Google Scholar
• Raghavan V: ‘Al-Cr-Ti (aluminum-chromium-titanium)’, J. Phs. Eqil. Diff., 2005, 26, (4), 349–356.
   Web of Science ®Google Scholar
• Jewett TJ, Ahrens B and Dahms M: ‘Phase equilibria involving the ô-L12 and TiAl2 phases in the Ti-Al-Cr system’, Intermetallics, 1996, 4, (7), 543–556.
   Web of Science ®Google Scholar
• Song X, Liu X and Zhang J: ‘Neck formation and self-adjusting mechanism of neck growth of conducting powders in spark plasma sintering’, J. Am. Ceram. Soc., 2006, 89, (2), 494–500.
   Web of Science ®Google Scholar
• Wang SW, Chen LD, Kang YS, Niino M and Hirai T: ‘Effect of plasma activated sintering (PAS) parameters on densification of copper powder’, Mater. Res. Bull., 2000, 35, (4), 619–628.
   Web of Science ®Google Scholar
• Olevsky EA and Froyen L: ‘Impact of thermal diffusion on densification during SPS’, J. Am. Ceram. Soc., 2009, 92, S122–S132.
   Web of Science ®Google Scholar
• Chaim R: ‘Densification mechanisms in spark plasma sintering of nanocrystalline ceramics’, Mater. Sci. Eng. A, 2007, A443, (1–2), 25–32.
   Web of Science ®Google Scholar
• Yilmaz S, Evin E and Güler Ö: ‘In situ synthesis of titanium diboride composites through volume combustion’, Mater. Sci. Technol., 2011, 27, (7), 1123–1130.
   Web of Science ®Google Scholar
• Pilliar RM: ‘Porous-surfaced metallic implants for orthopedic applications’, J. Biomed. Mater. Res., 1987, 21, (A1 Suppl), 1–33.
   PubMed Web of Science ®Google Scholar
• Asaoka K, Kuwayama N, Okuno O and Miura I: ‘Mechanical properties and biomechanical compatibility of porous titanium for dental implants’, J. Biomed. Mater. Res., 1985, 19, (6), 699–713.
   PubMed Web of Science ®Google Scholar
• Tokita M: ‘Industrial applications of advanced spark plasma sintering’, Am. Ceram. Soc. Bull., 2006, 85, (2), 32–34.
   Web of Science ®Google Scholar
• Fidan S, Avcu E, Karakulak E, Yamanoglu R, Zeren M and Sinmazcelik T: ‘Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy’, Mater. Sci. Technol., 2013, 29, (9), 1088–1094.
   Web of Science ®Google Scholar