Melting of multipass surface tracks in steel incorporating titanium carbide powders

References

• Ayers JD, Schaffer RT and Robey WP: ‘A laser processing technique for improving the wear-resistance of metals’, J. Met., 1981, 33, 19–23.
   Google Scholar
• Ayers JD and Bolster RN: ‘Abrasive wear with fine diamond particles of carbide-containing aluminum and titanium alloy surfaces’, Wear, 1984, 93, 193–205.
   Web of Science ®Google Scholar
• Abboud JH and West DRF: ‘Microstructure of titanium injected with SiC particles by laser processing’, Mater. Sci. Lett., 1991, 10, 1149–1152.
   Google Scholar
• Mridha S and Baker TN: ‘Incorporation of 3 μm SiCp into titanium surfaces using a 2·8 kW laser beam of 186 and 373 MJm−2 energy densities in a nitrogen environment’, J. Mater. Process. Technol., 2007, 185, 38–45.
   Web of Science ®Google Scholar
• Chao MJ, Wang WL, Liang EJ and Ouyang D: ‘Microstructure and wear resistance of TaC reinforced Ni-based coating by laser cladding’, Surf. Coat. Technol., 2008, 202, 1918–1922.
   Web of Science ®Google Scholar
• Wang XH, Zhang M, Liu XM, Qu SY and Zou ZD: ‘Microstructure and wear properties of TiC/FeCrBSi surface composite coating prepared by laser cladding’, Surf. Coat. Technol., 208, 202, (15), 3600–3606.
   Web of Science ®Google Scholar
• Huang H.-GLK.-J and Zhou C.-R: ‘Laser cladding of Zr55Al10Ni5Cu30/SiC amorphous composite coatings on AZ91D magnesium alloy for improvement of corrosion resistance’, Adv. Mater. Res., 2011, 179–180, 757–761
   Google Scholar
• Baker TN: in ‘Surface engineering of light alloys - aluminium, magnesium and titanium alloys’, (ed. Dong H), 398–443; 2010, Oxford, Wood Publishing Ltd.
   Google Scholar
• Atamert S and Bhadeshia HKDH: ‘Comparison of the microstructures and adhesive wear properties of stellite hardfacing alloys deposited by arc welding and laser cladding’, Metall. Trans. A, 1989, 20A, 1037–1054.
   Web of Science ®Google Scholar
• Kahn TI and Fowles D: ‘Surface modification of ti-6ai-4v alloy using metal arc heat source’, Surf. Eng., 1997, 13, 257–259.
   Google Scholar
• Mridha S and Ng BS: ‘Addition of ceramic particles to GTAW melted titanium surfaces’, Surf. Eng., 1999, 15, (3), 210–215.
   Web of Science ®Google Scholar
• Buytoz S, Ulutan M and Yildirim MM: ‘Dry sliding wear behavior of GTAW welding clad WC composite coatings’, Appl. Surf. Sci., 2005, 252, 1313–1323.
   Web of Science ®Google Scholar
• Mridha S: ‘Titanium nitride layer formation by TIG surface melting in reactive environment’, J. Mater. Process. Technol., 2005, 168, 471–477.
   Web of Science ®Google Scholar
• Wenbin D, Haiyan J, Xiaoqin Z, Dehui L and Shoushan Y: ‘Microstructure and mechanical properties of GTA surface modified composite layer on magnesium alloy AZ31 with SiCP’, J. Alloys Compd, 2007, 429, 233–241.
   Web of Science ®Google Scholar
• Wang XH, Song SL, Zou ZD and Qu SY: ‘Fabricating TiC particles reinforced Fe-based composite coatings produced by GTAW multi-layers melting process’, Mater. Sci. Eng. A, 2006, A441, 60–67.
   Web of Science ®Google Scholar
• Wang XH, Song SL, Qu SY and Zou ZD: ‘Characterization of in situ synthesized TiC particle reinforced Fe-based composite coatings produced by multi-pass overlapping GTAW melting process’, Surf. Coat. Technol., 2007, 201, 5899–5905.
   Web of Science ®Google Scholar
• Liu J, Huang J, Liu J and Song G: ‘Microstructure and wear resistance of TiC+Cr7C3 reinforced ceramal composite coating produced by PTA weld-surfacing process’, Adv. Mater. Res., 2010, 97–101, 1377–1380.
   Google Scholar
• Wang LM, Liu JB and Yuan C: ‘Fe-Cr-C-TiC high-chromium Fe-based ceramic composite coating prepared by PTA weld-surfacing process’, Mater. Sci. Forum, 2011, 675–677, 783–787.
   Google Scholar
• Mridha S and Dyuti S: ‘Formation of TiN dispersed composite layer on steel surfaces by titanium powder preplacement and TIG surface melting processes’, Adv. Mater. Res., 2011, 264–265, 1415–1420.
   Google Scholar
• Cooper KP and Slebodnick P: ‘Recent developments in laser melt/particle injection processing’, J. Laser Appl., 1989, 1, 21–29.
   Google Scholar
• Morton PH, Bell T, Weisheit A, Kroll J, Mordike BL: in ‘Surface modification technologies V’, (ed. Sudarshan T S and Braza J F), 593–609; 1992, London, Institute of Materials.
   Google Scholar
• Hu C and Baker TN: ‘The importance of preheat before laser nitriding a Ti-6Al-4V alloy’, Mater. Sci. Eng. A, 1999, A265, 268–275.
   Google Scholar
• Baker TN and Selamat MS: ‘Surface engineering of Ti-6Al-4V by nitriding and powder alloying using a CW CO2 laser’, Mater. Sci. Technol., 2008, 24, 189–200.
   Web of Science ®Google Scholar
• Lin YC and Chang KY: ‘Elucidating the microstructure and wear behavior of tungsten carbide multi-pass cladding on AISI 1050 steel’, J. Mater. Process. Technol., 2010, 210, 219–225.
   Web of Science ®Google Scholar
• Mridha S, Md Idriss AN and Baker TN: ‘Incorporation of TiC particles on AISI 4340 low alloy steel surfaces via tungsten inert gas arc melting’, Adv. Mater. Res., 2012, 445, 665–660.
   Google Scholar
• Mridha S and Baker TN: ‘Overlapping tracks processed by TIG melting TiC preplaced powder on low alloy steel surfaces’, Mater. Sci. Technol., (2014), DOI 10·1179/1743284714Y.0000000530.
   Google Scholar
• Hunt J, Derguti F and Todd I: ‘Selection of steels suitable for additive layer manufacturing’, Ironmaking Steelmaking, 2014, 41, 254–256.
   Web of Science ®Google Scholar
• Easterling KE: ‘Introduction to physical metallurgy of welding’; 1992, London, Butterworth-Heinemann.
   Google Scholar
• Rykalin N: ‘Berechnung Der Wärmevorgänge Beim Schweissen’; 1957, Berlin, VEB Verlag Technik.
   Google Scholar
• Radaj D: ‘Heat effects of welding’; 1992, Springer-Verlag.
   Google Scholar
• Fuerschbach PW and Knorovsky GA: ‘A study of melting efficiency in plasma arc and gas tungsten arc welding’, Weld. J. Res. Suppl., 1991, 287s–297s.
   Google Scholar
• DuPont JN and Marder AR: ‘Thermal efficiency of arc welding processes’, Weld. J. Res. Suppl., 1995, 406s–416s.
   Google Scholar
• Wells AA: ‘Heat flow in welding’, Weld. J., 1952, 263s–267s.
   Google Scholar
• Terry BS and Chinyamakobvu OS: ‘Assessment of the reaction of SiC powders with iron-based alloys’, J. Mater. Sci., 1993, 28, 6779–6784.
   Web of Science ®Google Scholar
• Raghavan V: ‘C-Fe-Ti(Carbon-iron-titanium)’, J. Phase Equilib., 2003, 24, 62–66.
   Web of Science ®Google Scholar
• Patel P, Mridha S and Baker TN: ‘Influence of shielding gases on preheat produced in surface coatings incorporating SiC particulates into microalloy steel using TIG technique’, Mater. Sci. Technol., 2014, 30, (12), 1506–1513.
   Web of Science ®Google Scholar
• Schneider M: ‘Laser cladding with powder’, Dissertation, Twente University, Enschede, Netherlands, 1998.
   Google Scholar
• Mridha S, Md Idriss AN, Maleque MA, Suryanto, and Souad A: ‘Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc, IJMME., 2012, 7, (1), 48–53.
   Google Scholar
• Baker TN, Li Y, Wilson JA, Craven AJ and Crowther DN: ‘Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels’, Mat. Sci. Technol., 2004, 20, 720–730.
   Web of Science ®Google Scholar
• Chen Y, Yang HM: ‘Growth morphology and mechanism of primary TiC carbide in laser clad TiC/FeAl composite coating’, Mater. Lett., 2003, 57, 1233–1238.
   Web of Science ®Google Scholar
• Fernandez R, Lecomte JC, Kattamis TE: ‘Effect of solidification parameters on growth geometry of MC carbide in IN-100dendritic mono-crystals’, Metall. Trans. A, 1978, 9A, 1381–1386.
   Web of Science ®Google Scholar
• Manohar PA, Ferry M and Chandra T: ‘Prediction of critical grain radius in particle-containing materials’, ISIJ Int., 1998, 38, 913–.924.
   Web of Science ®Google Scholar
• Mills KC, Keene BJ, Brooks RF and Shirali A: ‘Marangoni effects in welding’, Proc. R. Soc. London A, 1998, 356A, 911–925.
   Google Scholar