References
- Koch CC, Youssef KM, Scattergood RO and Murty KL: ‘Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys’, Adv. Eng. Mater., 2005, 7, (9), 787–794.
- Koch CC: ‘Optimization of strength and ductility in nanocrystalline and ultrafine grained metals’, Scr. Mater., 2003, 49, (7), 657–662.
- Zhu YT, Liao XZ, Srinivasan SG, Zhao YH, Baskes MI, Zhou F and Lavernia EJ: ‘Nucleation and growth of deformation twins in nanocrystalline aluminum’, Appl. Phys. Lett., 2004, 85, (21), 5049–5051.
- Wang YM, Chen MW, Zhou FH and Ma E: ‘High tensile ductility in a nanostructured metal’, Nature, 2002, 419, (6910), 912–915.
- He G, Eckert J, Loser W and Schultz L: ‘Novel Ti-base nanostructure-dendrite composite with enhanced plasticity’, Nat. Mater., 2003, 2, (1), 33–37.
- Ma E, Wang YM, Lu QH, Sui ML, Lu L and Lu K: ‘Strain hardening and large tensile elongation in ultrahigh-strength nano-twinned copper’, Appl. Phys. Lett., 2004, 85, (21), 4932–4934.
- Horita Z, Ohashi K, Fujita T, Kaneko K and Langdon TG: ‘Achieving high strength and high ductility in precipitation-hardened alloys’, Adv. Mater., 2005, 17, (13), 1599–1602.
- Zhao YH, Liao XZ, Cheng S, Ma E and Zhu YT: ‘Simultaneously increasing the ductility and strength of nanostructured alloys’, Adv. Mater., 2006, 18, (17), 2280–2953.
- Wang YM and Ma E: ‘Temperature and strain rate effects on the strength and ductility of nanostructured copper’, Appl. Phys. Lett., 2003, 83, (15), 3165–3167.
- Nalwa HS: ‘Encyclopedia of nanoscience and nanotechnology’; 2004, Stevenson Ranch, CA, American Scientific Publishers.
- Srinivasan R, Cherukuri B and Chaudhury PK: ‘Scaling up of equal channel angular pressing (ECAP) for the production of forging stock’, in ‘Nanomaterials by severe plastic deformation’, (ed. Horita Z), 371–378; 2006 , Fukuoka, Japan, Trans Tech Publications.
- Yeh JW, Chen SK, Lin SJ, Gan JY, Chin TS, Shun TT, Tsau CH and Chang SY: ‘Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes’, Adv. Eng. Mater., 2004, 6, (5), 299–303.
- Yeh JW: ‘Recent progress in high-entropy alloys’, Ann. Chim.-Sci. Mater., 2006, 31, (6), 633–648.
- Tong CJ, Chen YL, Chen SK, Yeh JW, Shun TT, Tsau CH, Lin SJ and Chang SY: ‘Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements’, Metall. Mater. Trans. A, 2005, 36A, (4), 881–893.
- Tong CJ, Chen MR, Chen SK, Yeh JW, Shun TT, Lin SJ and Chang SY: ‘Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements’, Metall. Mater. Trans. A, 2005, 36A, (5), 1263–1271.
- Wu JM, Lin SJ, Yeh JW, Chen SK and Huang YS: ‘Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content’, Wear, 2006, 261, (5–6), 513–519.
- Tung CC, Yeh JW, Shun TT, Chen SK, Huang YS and Chen HC: ‘On the elemental effect of AlCoCrCuFeNi high-entropy alloy system’, Mater. Lett., 2007, 61, (1), 1–5.
- Zhang KB, Fu ZY, Zhang JY, Shi J, Wang WM, Wang H, Wang YC and Zhang QJ: ‘Nanocrystalline CoCrFeNiCuAl high-entropy solid solution synthesized by mechanical alloying’, J. Alloys Compd, 2009, 485, (1–2), L31–L34.
- Hemphill MA, Yuan T, Wang GY, Yeh JW, Tsai CW, Chuang A and Liaw PK: ‘Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys’, Acta Mater., 2012, 60, (16), 5723–5734.
- Zhang KB, Fu ZY, Zhang JY, Wang WM, Wang H, Wang YC, Zhang QJ and Shi J: ‘Microstructure and mechanical properties of CoCrFeNiTiAlx high-entropy alloys’, Mater. Sci. Eng. A-Struct. Mater., 2009, A508, (1–2), 214–219.
- Wang XF, Zhang Y, Qiao Y and Chen GL: ‘Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys’, Intermetallics, 2007, 15, (3), 357–362.
- Cantor B, Chang ITH, Knight P and Vincent AJB: ‘Microstructural development in equiatomic multicomponent alloys’, Mater. Sci. Eng. A-Struct. Mater., 2004, A375, 213–218.
- Otto F, Dlouhy A, Somsen C, Bei H, Eggeler G and George EP: ‘The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy’, Acta Mater., 2013, 61, (15), 5743–5755.
- Tsai KY, Tsai MH and Yeh JW: ‘Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys’, Acta Mater., 2013, 61, (13), 4887–4897.
- Bhattacharjee PP, Sathiaraj GD, Zaid M, Gatti JR, Lee C, Tsai CW and Yeh JW: ‘Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy’, J. Alloys Compd, 2014, 587, 544–552.
- Gludovatz B, Hohenwarter A, Catoor D, Chang EH, George EP and Ritchie RO: ‘A fracture-resistant high-entropy alloy for cryogenic applications’, Science, 2014, 345, (6201), 1153–1158.
- Chen YL, Hu YH, Tsai CW, Hsieh CA, Kao SW, Yeh JW, Chin TS and Chen SK: ‘Alloying behavior of binary to octonary alloys based on Cu-Ni-Al-Co-Cr-Fe-Ti-Mo during mechanical alloying’, J. Alloys Compd, 2009, 477, (1–2), 696–705.
- Chen YL, Hu YH, Hsieh CA, Yeh JW and Chen SK: ‘Competition between elements during mechanical alloying in an octonary multi-principal-element alloy system’, J. Alloys Compd, 2009, 481, (1–2), 768–775.
- Yeh JW, Chang SY, Hong YD, Chen SK and Lin SJ: ‘Anomalous decrease in X-ray diffraction intensities of Cu-Ni-Al-Co-Cr-Fe-Si alloy systems with multi-principal elements’, Mater. Chem. Phys., 2007, 103, (1), 41–46.
- Zhou YJ, Zhang Y, Wang YL and Chen GL: ‘Microstructure and compressive properties of multicomponent Alx(TiVCrMnFeCoNiCu)100-x high-entropy alloys’, Mater. Sci. Eng. A-Struct. Mater., 2007, A454, 260–265.
- Singh S, Wanderka N, Murty BS, Glatzel U and Banhart J: ‘Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy’, Acta Mater., 2011, 59, (1), 182–190.
- Kuznetsov AV, Shaysultanov DG, Stepanov ND, Salishchev GA and Senkov ON: ‘Tensile properties of an AlCrCuNiFeCo high-entropy alloy in as-cast and wrought conditions’, Mater. Sci. Eng. A-Struct. Mater., 2012, A533, 107–118.
- Ye XY, Ma MX, Liu WJ, Li L, Zhong ML, Liu YX and Wu QW: ‘Synthesis and characterization of high-entropy alloy AlxFeCoNiCuCr by laser cladding’, Adv. Mater. Sci. Eng., 2011, 485942.
- Tsai CW, Tsai MH, Yeh JW and Yang CC: ‘Effect of temperature on mechanical properties of Al0.5CoCrCuFeNi wrought alloy’, J. Alloys Compd, 2010, 490, (1–2), 160–165.
- Hsu CY, Yeh JW, Chen SK and Shun TT: ‘Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition’, Metall. Mater. Trans. A, 2004, 35A, (5), 1465–1469.
- Valiev RZ, Alexandrov IV, Zhu YT and Lowe TC: ‘Paradox of strength and ductility in metals processed by severe plastic deformation’, J. Mater. Res., 2002, 17, (1), 5–8.
- Li HQ and Ebrahimi F: ‘Transition of deformation and fracture behaviors in nanostructured face-centered-cubic metals’, Appl. Phys. Lett., 2004, 84, (21), 4307–4309.
- Youssef KM, Scattergood RO, Murty KL, Horton JA and Koch CC: ‘Ultrahigh strength and high ductility of bulk nanocrystalline copper’, Appl. Phys. Lett., 2005, 87, (9).
- Ma YQ, Jin JE and Lee YK: ‘A repetitive thermomechanical process to produce nano-crystalline in a metastable austenitic steel’, Scr. Mater., 2005, 52, (12), 1311–1315.
- Meyers MA, Mishra A and Benson DJ: ‘Mechanical properties of nanocrystalline materials’, Prog. Mater. Sci., 2006, 51, (4), 427–556.
- Ma E: ‘Eight routes to improve the tensile ductility of bulk nanostructured metals and alloys’, JOM, 2006, 58, (4), 49–53.
- Dieter GE: ‘Mechanical metallurgy’; 1988, London, New York, McGraw-Hill.
- Humphreys FJ and Hatherly M: ‘Recrystallization and related annealing phenomena’, 369–392; 1995, Oxford, TarrytownNY, Pergamon.
- Reed-Hill RE and Abbaschian R: ‘Physical metallurgy principles’, 181–184; 1992, Boston, MA, PWS-Kent Pub.
- Reed-Hill RE and Abbaschian R: ‘Physical metallurgy principles’, 1994, Boston, MA, PWS Publishing Company.
- Swalin RA: ‘Thermodynamics of solids’, 220–252; 1972, New York, J. Wiley.
- Yeh JW: ‘Alloy design strategies and future trends in high-entropy alloys’, JOM, 2013, 65, (12), 1759–1771.