Analysis of residual stresses in particulate reinforced aluminium matrix composite after EDM

References

• K. M. Patel Pulak, M. Pandey and P. Venkateswara Rao: ‘Determination of an optimum parametric combination using a surface roughness prediction model for EDM of Al2O3/SiCw/TiC ceramic composite’, Mater. Manuf. Process., 2009, 24, 675–682. doi: 10.1080/10426910902769319
   Web of Science ®Google Scholar
• P. Narender Singh, K. Ragukandan, M. Rathinasabapathi and B. C. Pai: ‘Electric discharge machining of Al–10%SiC as-cast metal matrix composite’, J. Mater Process. Technol., 2004, 155, 1653–1657. doi: 10.1016/j.jmatprotec.2004.04.321
   Web of Science ®Google Scholar
• A. Raiz Ahamd, P. Asokan and S. Aravindan: ‘Electric discharge machining of hybrid Al–SiC–B4C and Al–SiC–glass MMC's’, Int. J. Adv. Manuf. Technol., 2009, 44, 520–528. doi: 10.1007/s00170-008-1839-0
   Web of Science ®Google Scholar
• G. A. Webster and A. N. Ezeilo: ‘Residual stress distributions and their influence on fatigue lifetimes’, Int. J. Fatigue, 2001, 23, 375–383. doi: 10.1016/S0142-1123(01)00133-5
   Web of Science ®Google Scholar
• J. C. Rebelo, A. M. Dias, D. Kremer and J. L. Lebrum: ‘Influence of pulse energy on the surface integrity of martensite steels’, J. Mater. Process. Technol., 1998, 84, 90–96. doi: 10.1016/S0924-0136(98)00082-X
   Web of Science ®Google Scholar
• P. J. Withers and H. K. D. H. Bhadeshia: ‘Residual stress. Part 1 – measurement techniques’, Mater. Sci. Technol., 2001, 17, 355–367. doi: 10.1179/026708301101509980
   Web of Science ®Google Scholar
• L. Cheng, Z. Fan and Z. Guoding: ‘Micro-X-ray diffraction study of thermal residual stresses in some model aluminum matrix composite’, J. Mater. Sci., 2004, 39, 2923–2925. doi: 10.1023/B:JMSC.0000021482.15837.fc
   Web of Science ®Google Scholar
• U. Welzel, J. Ligot, P. Lamparter, A. C. Vermeulen and E. J. Mittemeijer: ‘Stress analysis of polycrystalline thin films and surface regions by X-ray diffraction’, J. Appl. Crystallogr., 2005, 38, 1–29. doi: 10.1107/S0021889804029516
   Web of Science ®Google Scholar
• M. E. Fitzpatrick, A. T. Fry, P. Holdway, L. Kandil, J. Shackleton and L. Suominen: ‘Measurement good practice guide no. 52. Determination of residual stresses by X-ray diffraction’, 2005.
   Google Scholar
• B. Ekmekci, O. Elkoca, A. Erman Tekkaya and A. Erden: ‘Residual stresses and hardness depth in electric discharge machining: de-ionized water as dielectric’, Mach. Sci. Technol., 2005, 9, 39–61. doi: 10.1081/MST-200051244
   Web of Science ®Google Scholar
• A. G. Mamalis, G. C. Vosniakos and N. M. Vacevanidis: ‘Residual stress distribution and structural phenomena of high strength steel surface due to EDM and ball-drop forming’, Ann. CIRP, 1998, 37, 531–535. doi: 10.1016/S0007-8506(07)61694-1
   Google Scholar
• B. Ekmekci: ‘Residual stress and white layer in electric discharge machining (EDM)’, Appl. Surf. Sci., 2007, 353, 9234–9240. doi: 10.1016/j.apsusc.2007.05.078
   Web of Science ®Google Scholar
• W. N Sharpe Jr and W. N Sharpe: ‘Springer handbook of experimental solid mechanics’ 801, 820; 2008, Springer.
   Google Scholar
• V. Hauk: ‘Structural and residual stress analysis by nondestructive methods: evaluation–application–assessment’; 1997, Elsevier.
   Google Scholar
• S. Kumar, R. Singh, T. P. Singh and B. L. Sethi: ‘Surface modification by electric discharge machining: a review’, J. Mater. Process. Technol., 2009, 209, 3675–3687. doi: 10.1016/j.jmatprotec.2008.09.032
   Web of Science ®Google Scholar
• D. Sikarskie: ‘On a series form of correction to stresses measured using X-ray diffraction’, AIME Trans., 1967, 239, 577–580.
   Google Scholar
• D. C. Montgomery: ‘Design and analysis of experiments’; 1997, New York, John Wiley and Sons.
   Google Scholar
• G. Taguchi: ‘Introduction to quality engineering’; 1990, Tokyo, Asian Productivity Organization.
   Google Scholar
• P. J. Ross: ‘Taguchi techniques for quality engineering’; 1996, New York, Mc-Graw Hill.
   Google Scholar
• J. P. Kruth, B. Lauwers, B. Schacht, P. Bleys and M. Stucki: ‘Comparison between oil and water dielectric in wire EDM of tool steel’, Proc. 13th Int Symp. on ‘Electro-machining’ Bilbao, Spain May 2001, [conference organiser], 463–472.
   Google Scholar
• V. Tvergaard, Xia Cedric and J. W. Hutchinson: ‘Cracking due to localized hot shocks’, J. Am. Soc., 1993, 76, 729–736.
   Web of Science ®Google Scholar
• V. Senthilkumar and B. Uday Omprakash: ‘Effect of titanium carbide particles addition in the aluminum composite on EDM process parameters’, J. Manuf. Process, 2011, 13, 60–66. doi: 10.1016/j.jmapro.2010.10.005
   Google Scholar
• P. J. Wither, M. Terski, L. Edwards, P. J. Bouchards and D. J. Butlle: ‘Recent advances in residual stress measurement’, Int. J. Pres. Ves. Pip., 2008, 85, 118–127. doi: 10.1016/j.ijpvp.2007.10.007
   Web of Science ®Google Scholar
• T. Adachi, T. Sekino, T. Nakayama, T. Kusunos and K. Niihara: ‘Measurement of microscopic stress distribution of multilayered composite by X-ray stress analysis’, Mater. Lett., 2003, 57, 3057–3062. doi: 10.1016/S0167-577X(02)01436-2
   Web of Science ®Google Scholar
• C. S. Trueman and J. Hoddleston: ‘Material removal by spalling during EDM of ceramics’, J. Eur. Soc., 2000, 20, 629–1635.
   Google Scholar
• R. A. Mahdavinejad and A. Mahdavinejad: ‘ED machining of WC–Co’, J. Mater. Process. Technol., 2005, 162–163, 637–643. doi: 10.1016/j.jmatprotec.2005.02.211
   Web of Science ®Google Scholar
• H. Hocheng, W. T. Lei and H. S. Hsu: ‘Preliminary study of material removal in electric discharge machining of SiC/Al’, J. Mater. Process. Technol., 1997, 63, 813–818. doi: 10.1016/S0924-0136(96)02730-6
   Web of Science ®Google Scholar