Comparison of fatigue crack propagation in nickel base superalloys RR1000 and Udimet 720Li

References

• N. J. Hide, M. B. Henderson and P. A. S. Reed: ‘Effects of grain and precipitate size variation on creep-fatigue behaviour of Udimet 720Li in both air and vacuum’, in ‘Superalloys 2000’, (ed. T. M. Pollock, R. D. Kissinger, R. R. Bowman et al.., 495–503; 2000, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
   Google Scholar
• B. A. Lerch, N. Jayaraman and S. D. Antolovich: ‘A study of fatigue damage mechanisms in Waspaloy from 25 to 800°C’, Mater. Sci. Eng., 1984, 66, 151–165.
   Google Scholar
• H. F. Merrick and S. Floreen: ‘The effects of microstructure on elevated temperature crack growth in nickel-base alloys’, Metall. Trans. A, 1978, 9A, 231–236.
   Web of Science ®Google Scholar
• D. W. Hunt, D. K. Skelton and D. M. Knowles: ‘Microstructural stability and crack growth behaviour of a polycrystalline nickel-base superalloy’, in ‘Superalloys 2000’, (ed. T. M. Pollock, R. D. Kissinger, R. R. Bowman et al.., 795–802; 2000, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
   Google Scholar
• J. Gayda and R. V. Miner: ‘The effect of microstructure on 650°C fatigue crack growth in P/M Astroloy’, Metall. Trans. A, 1983, 14A, 2301–2308.
   Web of Science ®Google Scholar
• J. Gayda and R. V. Miner: ‘Fatigue crack initiation and propagation in several nickel-base superalloys at 650°C’, Int. J. Fatigue, 1983, 5, 135–143.
   Web of Science ®Google Scholar
• S. P. Lynch, T. C. Radtke, B. J. Wicks and R. T. Byrnes: ‘Fatigue crack growth in nickel-based superalloys at 500–700°C. I: Waspaloy’, Fatigue Fract. Eng. Mater. Struct., 1994, 17, 297–311.
   Web of Science ®Google Scholar
• J. Tong and J. Bryne: ‘Effects of frequency on fatigue crack growth at elevated temperature’, Fatigue Fract. Eng. Mater. Struct., 1999, 22, 185–193.
   Web of Science ®Google Scholar
• S. F. Toh and W. M. Rainforth: ‘Fatigue of a nickel base superalloy with bimodal grain size’, Mater. Sci. Technol., 1996, 12, 1007–1014.
   Web of Science ®Google Scholar
• V. Subramanya Sarma, M. Sundararaman and K. A. Padmanabhan: ‘Effect of γ′ size on room temperature low cycle fatigue behaviour of a nickel base superalloy’, Mater. Sci. Technol., 1998, 14, 669–675.
   Web of Science ®Google Scholar
• H. T. Pang and P. A. S. Reed: ‘Fatigue crack initiation and short crack growth in nickel-base turbine disc alloys—the effects of microstructure and operating parameters’, Int. J. Fatigue, 2003, 25, 1089–1099.
   Web of Science ®Google Scholar
• H. T. Pang and P. A. S. Reed: ‘Microstructure effects on high temperature fatigue crack initiation and short crack growth in turbine disc nickel-base superalloy Udimet 720Li’, Mater. Sci. Eng. A, 2007, A448, 67–79.
   Web of Science ®Google Scholar
• H. T. Pang and P. A. S. Reed: ‘Effects of microstructure on room temperature fatigue crack initiation and short crack propagation in Udimet 720Li Ni-base superalloy’, Int. J. Fatigue, 2009, 30, 2009–2020.
   Web of Science ®Google Scholar
• H. T. Pang and P. A. S. Reed: ‘Microstructure variation effects on room temperature fatigue threshold and crack propagation in Udimet 720Li Ni-base superalloy’, Fatigue Fract. Eng. Mater. Struct., 2009, 32, 685–701.
   Web of Science ®Google Scholar
• J. Tong, S. Dalby, J. Byrne, M. B. Henderson and M. C. Hardy: ‘Creep, fatigue and oxidation in crack growth in advanced nickel base superalloys’, Int. J. Fatigue, 2001, 23, 897–902.
   Web of Science ®Google Scholar
• S. Dalby and J. Tong: ‘Crack growth in a new nickel-based superalloy at elevated temperature Part I Effects of loading waveform and frequency on crack growth’, J. Mater. Sci., 2005, 40, 1217–1228.
   Web of Science ®Google Scholar
• J. Tong, S. Dalby and J. Byrne: ‘Crack growth in a new nickel-based superalloy at elevated temperature. Part III. Characterisation’, J. Mater. Sci., 2005, 40, 1237–1243.
   Web of Science ®Google Scholar
• S. Baker: ‘An investigation into static crack growth and dwell-fatigue in the nickel based superalloy RR1000 at elevated temperatures’, ‘ MRes thesis, University of Birmingham, Birmingham, UK’; 2011.
   Google Scholar
• D. M. Knowles and D. W. Hunt: ‘The influence of microstructure and environment on the crack growth behavior of powder metallurgy nickel superalloy RR1000’, Metall. Mater. Trans. A, 2002, 33A, 3165–3172.
   Web of Science ®Google Scholar
• M. R. Bache, J. P. Jones, G. L. Drew, M. C. Hardy and N. Fox: ‘Environment and time dependent effects on the fatigue response of an advanced nickel based superalloy’, Int. J. Fatigue, 2009, 31, 1719–1723.
   Web of Science ®Google Scholar
• D. Turan, D. Hunt and D. M. Knowles: ‘Dwell time effect on fatigue crack growth of RR1000 superalloy’, Mater. Sci. Technol., 2007, 23, 183–188.
   Web of Science ®Google Scholar
• S. Y. Yu, H. Y. Li, M. C. Hardy, S. A. McDonald and P. Bowen: ‘Mechanisms of dwell fatigue crack growth in an advanced nickel disc alloy RR1000’14, ‘ EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications, MATEC Web of Conferences’, ; 2014.
   Google Scholar
• S. Everitt, M. J. Starink and P. A. S. Reed: ‘Temperature and dwell dependence of fatigue crack propagation in various heat treated turbine disc alloys’, in ‘Superalloys 2008’, (ed. R. C. Reed, K. A. Green, P. Caron et al.., 741–750; 2008, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
   Google Scholar
• G. Onofrio, G. A. Osinkolu and M. Marchionni: ‘Fatigue crack growth of UDIMET 720 Li superalloy at elevated temperature’, Int. J. Fatigue, 2001, 23, 887–895.
   Web of Science ®Google Scholar
• A. M. Tucker, M. B. Henderson, A. J. Wilkinson, N. J. Hide and P. A. S. Reed: ‘High temperature fatigue crack growth in powder processed nickel based superalloy U720Li’, Mater. Sci. Technol., 2002, 18, 349–353.
   Web of Science ®Google Scholar
• D. Helm and O. Roder: ‘Influence of long term exposure in air on microstructure, surface stability and mechanical properties of UDIMET 720Li’, in ‘Superalloys 2000’, (ed. T. M. Pollock, R. D. Kissinger, R. R. Bowman et al.., 487–493; 2000, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
   Google Scholar
• H. Y. Li, J. Fisk, L. B. Lim, S. Williams and P. Bowen: ‘Thresholds of time dependent intergranular crack growth in a nickel disc alloy Alloy 720Li’14, ‘ EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications, MATEC Web of Conferences’, ; 2014.
   Google Scholar
• H. T. Pang: ‘Effect of microstructure variation on turbine disc fatigue lives’, ‘ PhD thesis, University of Southampton, Southampton, UK’; 2003.
   Google Scholar
• D. Hunt, ‘ University of Cambridge, UK, personal communications’; 1998.
   Google Scholar
• S. J. Hessell, W. Voice, A. W. James, S. A. Blackham, C. J. Small, M. R. Winstone and Rolls-Roycc plc: ‘Nickel alloy for turbine engine components’, ‘ US Patent 5897718’; 1999.
   Google Scholar
• ASTM International: ‘ASTM Standard E647-00: standard test method for measurement of fatigue crack growth rates’; 2000, West Conshohocken, PA, ASTM International.
   Google Scholar
• ASTM International: ‘ASTM Standard E1820-13: standard test method for measurement of fracture toughness’; 2013, West Conshohocken, PA, ASTM International.
   Google Scholar
• S. Suresh: ‘Fatigue of materials’, 2nd edn, ; 1998, Cambridge University Press.
   Google Scholar
• P. A. S. Reed, W. F. Gale and J. E. King: ‘Intrinsic thresholds in polycrystalline Udimet 720’, Mater. Sci. Technol., 1993, 9, 281–287.
   Web of Science ®Google Scholar
• M. A. Hicks and J. E. King: ‘Temperature effects on fatigue thresholds and structure sensitive crack growth in a nickel-base superalloy’, Int. J. Fatigue, 1983, 5, 67–74.
   Web of Science ®Google Scholar
• J. E. King: ‘Fatigue crack propagation in nickel-base superalloys: effects of microstructure, load ratio, and temperature’, Mater. Sci. Technol., 1987, 3, 750–764.
   Web of Science ®Google Scholar
• M. C. Hardy, B. Zirbel, G. Shen and R. Shankar: ‘Developing damage tolerance and creep resistance in a high strength nickel alloy for disc applications’, in ‘Superalloys 2004’, (ed. K. A. Green, T. M. Pollock, H. Harada et al.., 83–90; 2004, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
   Google Scholar
• R. Krakow, P. Randelzhofer, ‘ at the Chair of Metals Science and Technology, University of Erlangen-Nürnberg, Germany, personal communications’; 2011.
   Google Scholar
• I. M. Wilcock, D. G. Cole, J. W. Brooks and M. C. Hardy: ‘Creep/fatigue behaviour of P/M disc alloys’, ‘ Charles Parsons Turbine Conference 2003’, 749–764; 2003, Dublin, Institute of Materials Minerals and Mining.
   Google Scholar
• S. Everitt, M. J. Starink, H. T. Pang, I. M. Wilcock, M. B. Henderson and P. A. S. Reed: ‘A comparison of high temperature fatigue crack propagation in various subsolvus heat treated turbine disc alloys’, Mater. Sci. Technol., 2007, 23, 1419–1423.
   Web of Science ®Google Scholar
• D. D. Krueger, S. D. Antolovich and R. H. Van Stone: ‘Effects of grain size and precipitate size on the fatigue crack growth behavior of alloy 718 at 427°C’, Metall. Trans. A, 18A, 1987, 18A, 1431–1449.
   Web of Science ®Google Scholar
• R. Keller, W. Ziehinski and W. W. Gerberich: ‘On the onset of low-energy dislocation substructures in fatigue: grain size effects’, Mater. Sci. Eng. A, 1989, Al13, 267–280.
   Web of Science ®Google Scholar