References
- Amerio E., Sangermano M., Malucelli G., Priola A. and Voit B.: ‘Preparation and characterization of hybrid nanocomposite coatings by photopolymerization and sol–gel process’, Polymer, 2005, 46, 11241. doi: 10.1016/j.polymer.2005.09.062
- Schmidt H., Jonschker G., Goedicke S. and Menning M.: ‘The sol–gel process as a basic technology for nanoparticle-dispersed inorganic–organic composites’, J. Sol–Gel Sci. Technol., 2000, 19, 39. doi: 10.1023/A:1008706003996
- Cho J. D., Ju H. T. and Hong J. W.: ‘Photocuring kinetics of UV-initiated free-radical photopolymerizations with and without silica nanoparticles’, J. Polym. Sci. Polym. Chem., 2000, 42, 39.
- Ochi M., Takahashi R. and Tenachi A.: ‘Phase structure and mechanical and adhesion properties of epoxy/silica hybrids’, Polymer, 2001, 42, 5151. doi: 10.1016/S0032-3861(00)00935-6
- Tong Y., Liu Y. and Ding M.: ‘Preparation and properties of polyimide films codoped with barium and titanium oxides’, J. Appl. Polym. Sci., 2002, 83, 1810. doi: 10.1002/app.10118
- Hajji P., David L., Gerard J. P. and Vigier G.: ‘Synthesis, structure, and morphology of polymer–silica hybrid nanocomposites based on hydroxyethyl methacrylate’, J. Polym. Sci. Polym. Phys., 1999, 37, 3172. doi: 10.1002/(SICI)1099-0488(19991115)37:22<3172::AID-POLB2>3.0.CO;2-R
- Parkhil R., Knobbe E. T. and Donley M. S.: ‘Application and evaluation of environmentally compliant spray coated ormosil films as corrosion resistant treatments for aluminum 2024-T3’, Prog. Org. Coat., 2001, 41, 261. doi: 10.1016/S0300-9440(01)00138-2
- Livage J., Henry M. and Sanchez C.: ‘Sol–gel chemistry of transition metal oxides’, Prog. Solid State Chem., 1988, 18, 259. doi: 10.1016/0079-6786(88)90005-2
- Wouters M. E. L. and Wolfs D. P.: ‘Transparent UV curable antistatic hybrid coatings on polycarbonate prepared by the sol–gel method’, Prog. Org. Coat., 2004, 51, 312. doi: 10.1016/j.porgcoat.2004.07.020
- Du Y. J., Damron M. and Tang G.: ‘Inorganic/organic hybrid coatings for aircraft aluminum alloy substrates’, Prog. Org. Coat., 2003, 47, 401. doi: 10.1016/j.porgcoat.2003.08.017
- Sanchez C. and De G. J.: ‘Hybrid organic–inorganic nanocomposites from functional nano building blocks’, Chem. Mater., 2001, 13, 3061. doi: 10.1021/cm011061e
- Hofaccker S. and Mechtel M.: ‘Sol–gel: a new tool of coating chemistry’, Prog. Org. Coat., 2002, 45, 159. doi: 10.1016/S0300-9440(02)00045-0
- Zheludkevich M. L. and Serra R.: ‘Nanostructured sol–gel coatings doped with cerium nitrate as pre-treatments for AA-2024-T3 corrosion protection performance’, Electrochim. Acta, 2005, 51, 208. doi: 10.1016/j.electacta.2005.04.021
- Bayramoglu G. and Kahraman M. V.: ‘Synthesis and characterization of UV-curable dual hybrid oligomers based on epoxy acrylate containing pendant alkoxysilane group’, Prog. Org. Coat., 2006, 57, 50. doi: 10.1016/j.porgcoat.2006.06.002
- Zheludkevich M. L. and Serra R.: ‘Oxide nanoparticle reservoirs for storage and prolonged release of the corrosion inhibitors’, Electrochem. Commun., 2005, 7, 836. doi: 10.1016/j.elecom.2005.04.039
- Zheludkevich M. L. and Serra R.: ‘Corrosion protective properties of nano structured sol–gel hybrid coatings to AA2024-T3’, Surf. Coat. Technol., 2006, 200, 3084. doi: 10.1016/j.surfcoat.2004.09.007
- Lin J., Siddiqui J. A. and Ottenbrite R. M.: ‘Surface modification of inorganic oxide particles with silane coupling agent and organic dyes’, Polym. Adv. Technol., 2001, 12, 285. doi: 10.1002/pat.64
- Guin K., Nayak S. K., Rout T. K., Bandyopadhyay N. and Sengupta D. K.: ‘Corrosion behavior of nanohybrid titania–silica composite coating on phosphated steel sheet’, J. Coat. Technol. Res., 2012, 9, (1), 97–106. doi: 10.1007/s11998-011-9321-6
- Bera S., Udayabhanu G., Narayan R. and Rout T.: ‘Sol–gel process for anticorrosion coatings’, J. Res. Updates Polym. Sci., 2013, 2, 209.
- Varma R., Coalreavy J., Oubaha M., McDonagh C. and Duffy B.: ‘Effect of organic chelates on the performance of hybrid sol-gel coated AA 2024-T3 aluminum alloys’, Prog. Org. Coat., 2009, 66, 406. doi: 10.1016/j.porgcoat.2009.09.004
- Brinker C. J. and Scherer G. W.: ‘Sol–gel science: the physics and chemistry of sol–gel processing’; 1990, New York, Academic Press Inc.
- Chou T. P., Chandrasekaran C., Limmer S. J., Seraji S., Wu Y., Forbess M. J., Nguyen C. and Cao G. Z.: ‘Organic–inorganic hybrid coatings for corrosion protection’, J. Non.-Cryst. Solids, 2001, 290, 153–162. doi: 10.1016/S0022-3093(01)00818-3
- Ivanova Y., Gerganova T. S., Dimitriev Y., Salvado I. M. and Fernandes M. H. V.: ‘Nanostructured hybrid materials as precursors for synthesis of nanocoposites in Si–O–C–N–Zr system’, Thin Solid Films, 2006, 515, 271. doi: 10.1016/j.tsf.2005.12.080
- Behzadnasaba M., Mirabedin S. M., Kabiri K. and Jamali S.: ‘Corrosion performance of epoxy coatings containing silane treated ZrO2 nanoparticles on mild steel in 3.5% NaCl solution’, Corros. Sci., 2011, 53, 89. doi: 10.1016/j.corsci.2010.09.026
- Lin J., Siddiqui J. A. and Ottenbrite R. M.: ‘Surface modification of inorganic oxide particles with silane coupling agent and organic dyes’, Polym. Adv. Technol., 2001, 12, 285. doi: 10.1002/pat.64
- Wu K. H., Chang T. C., Yang C. C. and Wang G. P.: ‘Dynamics and corrosion resistance of amine-cured organically modified silicate coatings on aluminium alloys’, Thin Solid Films, 2006, 513, 84. doi: 10.1016/j.tsf.2006.01.022
- Good R. J.: ‘Contact angles and the surface free energy of solids’, Surf. Colloid Sci., 1979, 1–29. doi: 10.1007/978-1-4615-7969-4_1
- Guin S., Nayak T., Rout N. and Bandyopadhyay D. Sengupta: ‘Corrosion resistance nano-hybrid sol–gel coating on steel sheet’, ISIJ Int., 2011, 51, 435. doi: 10.2355/isijinternational.51.435
- Zhu D.: ‘Corrosion protection of metals by silane surface treatment’, 2014, https://etd.ohiolink.edu/ap/10?0:NO:10:P10_ACCESSION_NUM:ucin1115992852.
- Aramaki K.: ‘Self-healing mechanism of a protective film prepared on Ce(NO3)3-pretreated zinc electrode by modification with Zn(NO3)2 and Na3PO4’, Corros. Sci., 2003, 45, 1085. doi: 10.1016/S0010-938X(02)00153-1
- Rao S. S., Rao B. V., Kiran R. S. and Sreedhar B.: ‘Lactobionic acid as a new synergist in combination with phosphonate Zn(II) system for corrosion inhibition of carbon steel’, J. Mater. Sci. Technol., 2014, 30, 77. doi: 10.1016/j.jmst.2013.10.003
- Asami K., Hashimoto K. and Shimodiara S.: ‘X-ray photoelectron spectrum of Fe2+ state in iron oxide’, Corros. Sci., 1976, 16, 35. doi: 10.1016/S0010-938X(76)80005-4
- Nakayama N.: ‘Inhibitory effects of nitrilotris (methylenephosphonic acid) on cathodic reactions on steels in saturated Ca(OH)2 solution’, Corros. Sci., 2000, 42, 1897. doi: 10.1016/S0010-938X(00)00034-2
- Karman F. H., Felhosi I., Kalman E., Cserny I. and Kover L.: ‘The role of oxide layer formation during corrosion inhibition of mild steel in neutral aqueous media’, Electrochim. Acta, 1998, 43, 69. doi: 10.1016/S0013-4686(97)00236-3
- Wanger C. D., Riggs W. M., Davis L. E., Moulder J. F. and Muilenberg G. E.: ‘Handbook of X-ray photoelectron spectroscopy’, 1979, Eden Prairie, MN, Physical Electronics Division, Perkin-Elmer Corp.
- Payne R., Magee R. J. and Liesegang J.: ‘II Infrared and X-ray photoelectron spectroscopy of some transition metal dithiocarbamates and xanthates’, J. Electron. Spectrosc. Relat., 1985, 35, (1), 113–130. doi: 10.1016/0368-2048(85)80046-3
- Morf P., Raimondi F., Nothofer H. G., Schnyder B., Yasuda A., Wessels J. M. and Jung T. A.: ‘Dithiocarbamates: functional and versatile linkers for the formation of self-assembled monolayers’, Langmuir, 2006, 22, (2), 658–663. doi: 10.1021/la052952u
- Soares J., Whitten J., Oblas W. and Steeves D.: ‘Novel photoluminescence properties of surface modified nanocrystalline zinc oxide: toward a reactive scaffold’, Langmuir, 2008, 24, 371–374. doi: 10.1021/la702834w
- Singh J., Im J. and Whitten J.: ‘Adsorption of mercaptosilanes on nanocrystalline and single crystal zinc oxide surfaces’, Proc. SPIE, 2014, 7030, 70300T–703001. doi: 10.1117/12.794805
- Koo J., Cho J. J., Yang H. J., Oh W. K. and Park J.: ‘Surface modification of zinc oxide nanorods with Zn-porphyrin via metal–ligand coordination for photovoltaic applications’, Bull. Korean Chem. Soc., 2012, 33, 636–640. doi: 10.5012/bkcs.2012.33.2.636
- Kendig M., Jeanjaquet S., Addison R. and Waldrop J.: ‘Role of hexavalent chromium in the inhibition of corrosion of aluminum alloy’, Surf. Coat. Technol., 2001, 140, 58. doi: 10.1016/S0257-8972(01)01099-4
- Barranco V., S. Feliu Jr. and Feliu S.: ‘EIS study of the corrosion behaviour of zinc-based coatings on steel in quiescent 3% NaCl solution. Part 1: directly exposed coatings’, Corros. Sci., 2004, 46, 2206.
- Colazzo A., Covelo X. R. and Novoa C. Perez: ‘Corrosion protection performance of sol–gel coatings doped with red mud applied on AA2024-T3’, Prog. Org. Coat., 2012, 74, 334. doi: 10.1016/j.porgcoat.2011.10.001
- Wang D. and Bierwagen G. P.: ‘Sol–gel coatings on metal for corrosion protection’, Prog. Org. Coat., 2009, 64, 327. doi: 10.1016/j.porgcoat.2008.08.010
- Rout T. K., Bandyopadhyay N., Narayan R. and Rani N.: ‘Performance of titania–silica composite coating on interstitial-free steel sheet’, Scr. Mater., 2008, 58, (6), 473–476. doi: 10.1016/j.scriptamat.2007.10.046
- Wang H. and Akid R.: ‘A room temperature cured sol–gel anticorrosion pre-treatment for Al 2024-T3 alloys’, Corros. Sci., 2007, 49, 4491. doi: 10.1016/j.corsci.2007.04.015
- Metroke T. L., Gandhi J. S. and Apblett A.: ‘Corrosion resistance properties of Ormosil coatings on 2024-T3 aluminum alloy’, Prog. Org. Coat., 2004, 50, 231. doi: 10.1016/j.porgcoat.2004.03.001
- Sheffer M., Groysman A. and Mandler D.: ‘Electrodeposition of sol–gel films on Al for corrosion protection’, Corros. Sci., 2003, 45, 2893. doi: 10.1016/S0010-938X(03)00106-9
- Wright J. D. and Sommerdijk N. A. J.: ‘Sol–gel materials chemistry and applications’; 2001, Boca Raton, FL, CRC Press/OPA Overseas Publishers Association.
- Guglielmi M. J.: ‘Sol–gel coatings on metals’, Sol–Gel Sci. Technol., 1997, 8, 443.
- Wen J. and Wilkes G. L.: ‘Organic/inorganic hybrid network materials by the sol–gel approach’, Chem. Mater., 1996, 8, 1667. doi: 10.1021/cm9601143
- Subramanian V. and van Ooij W. J.: ‘Effect of the amine functional group on corrosion rate of iron coated with films of organofunctional silanes’, Corrosion, 1998, 54, 204. doi: 10.5006/1.3284845