Single- and double-pass FSW lap joining of AA5456 sheets with different thicknesses

References

• Y. Birol and S. Kasman: ‘Effect of welding parameters on microstructure and mechanical properties of friction stir welded EN AW 5083 H111 plates’, Mater. Sci. Technol., 2013, 29, 1354–1362.
   Web of Science ®Google Scholar
• R. Fonda, P. Pao, H. Jones, C. Feng, B. Connolly and A. Davenport: ‘Microstructure, mechanical properties, and corrosion of friction stir welded Al 5456’, Mater. Sci. Eng. A, 2009, A519, 1–8.
   Web of Science ®Google Scholar
• Y. Birol: ‘Evolution of grain structure across joints in friction stir welded EN AW 5083 H111 plates during thermal exposure’, Mater. Sci. Technol., 2013, 29, 1283–1289.
   Web of Science ®Google Scholar
• Y. Bozkurt, S. Salman and G. Çam: ‘Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 joints’, Sci. Technol. Weld. Join., 2013, 18, 337–345.
   Web of Science ®Google Scholar
• G. İpekog˘lu, S. Erim and G. Çam: ‘Investigation into the influence of post-weld heat treatment on the friction stir welded AA6061 Al-alloy plates with different temper conditions’, Metall. Mater. Trans. A, 2014, 45A, 864–877.
   Web of Science ®Google Scholar
• G. Çam, S. Güçlüer, A. Çakan and H. Serindag: ‘Mechanical properties of friction stir butt-welded Al-5086 H32 plate’, Materialwiss. Werkstofftech., 2009, 40, 638–642.
   Web of Science ®Google Scholar
• A. Simar, Y. Bréchet, B. de Meester, A. Denquin, C. Gallais and T. Pardoen: ‘Integrated modeling of friction stir welding of 6xxx series Al alloys: process, microstructure and properties’, Prog. Mater. Sci., 2012, 57, 95–183.
   Web of Science ®Google Scholar
• G. İpekog˘lu and G. Çam: ‘Effects of initial temper condition and postweld heat treatment on the properties of dissimilar friction-stir-welded joints between AA7075 and AA6061 aluminum alloys’, Metall. Mater. Trans. A, 2014, 45A, 3074–3087.
   Web of Science ®Google Scholar
• G. İpekog˘lu, S. Erim and G. Çam: ‘Effects of temper condition and post weld heat treatment on the microstructure and mechanical properties of friction stir butt-welded AA7075 Al alloy plates’, Int. J. Adv. Manuf. Technol., 2014, 70, 201–213.
   Web of Science ®Google Scholar
• G. Çam and S. Mistikoglu: ‘Recent developments in friction stir welding of Al-alloys’, J. Mater. Eng. Perform., 2014, 23, 1936–1953.
   Web of Science ®Google Scholar
• G. Çam, G. Ipekoglu and H. Tarik Serindag: ‘Effects of use of higher strength interlayer and external cooling on properties of friction stir welded AA6061-T6 joints’, Sci. Technol. Weld. Join., 2014, 19, 715–720.
   Web of Science ®Google Scholar
• G. Buffa, G. Campanile, L. Fratini and A. Prisco: ‘Friction stir welding of lap joints: influence of process parameters on the metallurgical and mechanical properties’, Mater. Sci. Eng. A, 2009, A519, 19–26.
   Web of Science ®Google Scholar
• S. Babu, G. Ram, P. Venkitakrishnan, G. Reddy and K. Rao: ‘Microstructure and mechanical properties of friction stir lap welded aluminum alloy AA2014’, J. Mater. Sci. Technol., 2012, 28, 414–426.
   Web of Science ®Google Scholar
• D. Yadav and R. Bauri: ‘Microstructural characterisation of friction stir processed aluminium’, Mater. Sci. Technol., 2011, 27, 1163–1169.
   Web of Science ®Google Scholar
• A. Ebnonnasir, F. Karimzadeh and M. Enayati: ‘Novel artificial neural network model for evaluating hardness of stir zone of submerge friction stir processed Al 6061-T6 plate’, Mater. Sci. Technol., 2011, 27, 990–995.
   Web of Science ®Google Scholar
• G. Çam: ‘Friction stir welded structural materials: beyond Al-alloys’, Int. Mater. Rev., 2011, 56, 1–48.
   Web of Science ®Google Scholar
• H. Bisadi, A. Tavakoli, M. Tour Sangsaraki and K. Tour Sangsaraki: ‘The influences of rotational and welding speeds on microstructures and mechanical properties of friction stir welded Al5083 and commercially pure copper sheets lap joints’, Mater. Des., 2013, 43, 80–88.
   Web of Science ®Google Scholar
• L. Dubourg, A. Merati and M. Jahazi: ‘Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin’, Mater. Des., 2010, 31, 3324–3330.
   Web of Science ®Google Scholar
• M. Wang, H. Zhang, J. Zhang, X. Zhang and L. Yang: ‘Effect of pin length on hook size and joint properties in friction stir lap welding of 7B04 aluminum alloy’, J. Mater. Eng. Perform., 2014, 23, (5), 1881–1886.
   Web of Science ®Google Scholar
• P. Threadgill, A. Leonard, H. Shercliff and P. Withers: ‘Friction stir welding of aluminium alloys’, Int. Mater. Rev., 2009, 54, 49–93.
   Web of Science ®Google Scholar
• Q. Yang, X. Li, K. Chen and Y. Shi: ‘Effect of tool geometry and process condition on static strength of a magnesium friction stir lap linear weld’, Mater. Sci. Eng. A, 2011, A528, 2463–2478.
   Web of Science ®Google Scholar
• L. Cederqvist and A. Reynolds: ‘Factors affecting the properties of friction stir welded aluminum lap joints’, Weld. J., 2001, 80, 281–287.
   Web of Science ®Google Scholar
• AWS D17.3/D17.3M:2010: ‘Specification for friction stir welding of aluminum alloys for aerospace applications’, 2009, Miami, FL, American Welding Society.
   Google Scholar
• X. Cao and M. Jahazi: ‘Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy’, Mater. Des., 2011, 32, 1–11.
   Web of Science ®Google Scholar
• M. Yadava, R. Mishra, Y. Chen, B. Carlson and G. Grant: ‘Study of friction stir joining of thin aluminium sheets in lap joint configuration’, Sci. Technol. Weld. Join., 2010, 15, 70–75.
   Web of Science ®Google Scholar
• L. Wan, Y. Huang, Y. Wang, S. Lv and J. Feng: ‘Friction stir welding of aluminium hollow extrusion: weld formation and mechanical properties’, Mater. Sci. Technol., 2014, 1–10.
   Google Scholar
• Y.-H. Zhao, S.-B. Lin, F.-X. Qu and L. Wu: ‘Influence of pin geometry on material flow in friction stir welding process’, Mater. Sci. Technol., 2006, 22, 45–50.
   Web of Science ®Google Scholar
• W. Arbegast: ‘A flow-partitioned deformation zone model for defect formation during friction stir welding’, Scr. Mater., 2008, 58, 372–376.
   Web of Science ®Google Scholar
• C. Menzemer and T. Srivatsan: ‘The effect of environment on fatigue crack growth behavior of aluminum alloy 5456’, Mater. Sci. Eng. A, 1999, A271, 188–195.
   Web of Science ®Google Scholar
• G. Ipekoglu, S. Erim, B. Kiral and G. Çam: ‘Investigation into the effect of temper condition on friction stir weldability of AA6061 Al-alloy plates’, Kovove Mater., 2013, 51, 155–163.
   Web of Science ®Google Scholar
• G. İpekog˘lu, B. Gören Kıral, S. Erim and G. Çam: ‘Investigation of the effect of temper condition on friction stir weldability of AA7075 Al-alloy plates’, Mater. Technol., 2012, 46, 627–632.
   Google Scholar
• G. Cantin, S. David, W. Thomas, E. Lara-Curzio and S. Babu: ‘Friction skew-stir welding of lap joints in 5083-0 aluminium’, Sci. Technol. Weld. Join., 2005, 10, 268–280.
   Web of Science ®Google Scholar