REFERENCES
- A. J. Wright: EUROPA CAFV Programme-Numerical Modelling Study, 2006, QinetiQ.
- N. Jones, T. O. Uran and S. A. Tekin: ‘The dynamic plastic behavior of fully clamped rectangular plates’, Int. J. Solids Struct. , 1970, 6, (12), 1499–1512.
- N. Jones, R. N. Griffin and R. E. van Duzer: ‘An experimental study into the dynamic plastic behavior of wide beams and rectangular plates’, Int. J. Mech. Set, 1971, 13, (8), 721–735.
- S. B. Menkes and H. J. Opat: ‘Tearing and shear failures in explosively loaded clamped beams’, Experimen. Mech. , 1973, 13, (11), 480–486.
- G. N. Nurick and J. B. Martin: ‘Deformation of thin plates subjected to impulsive loading — a review. Part I: theoretical considerations’, Int. J. Impact Eng. , 1989, 8, (2), 159–170.
- G. N. Nurick and J. B. Martin: ‘Deformation of thin plates subjected to impulsive loading-a review. Part II: experimental studies’, Int. J. Impact Eng. , 1989, 8, (2), 171–186.
- R. G. Teeling-Smith and G. N. Nurick: ‘The deformation and tearing of thin circular plates subjected to impulsive loads’, Int. J. Impact Eng. , 1991, 11, (1), 77–91.
- T. X. Yu and F. L. Chen: ‘The large deflection dynamic plastic response of rectangular plates’, Int. J. Impact Eng. , 1992, 12, (4), 605–616.
- M. D. Olson, G. N. Nurick and J. R. Fagnan: ‘Deformation and rupture of blast loaded square plates-predictions and experiments’, Int. J. Impact Eng. , 1993, 13, (2), 279–291.
- W. Q. Shen and N. Jones: ‘Dynamic response and failure of fully clamped circular plates under impulsive loading’, Int. J. Impact Eng. , 1993, 13, (2), 259–278.
- G. N. Nurick, M. E. Gelman and N. S. Marshall: ‘Tearing of blast loaded plates with clamped boundary conditions’, Int. J. Impact Eng. , 1996, 18, (7-8), 803–827.
- A. P. Mouritz, D. S. Saunders and S. Buckley: ‘The damage and failure of GRP laminates by underwater explosion shock loading’, Composites, 1994, 25, (6), 431–437.
- A. P. Mouritz: ‘The damage to stitched GRP laminates by underwater explosion shock loading’, Compos. Set Technol, 1995, 55, (4), 365–374.
- A. P. Mouritz: ‘Effect of processing on the underwater explosion shock behavior of GRP laminates’, J. Compos. Mater. , 1995, 29, (18), 2488–2503.
- G. N. Nurick, M. D. Olson, J. R. Fagnan and A. Levin: ‘Deformation and tearing of blast-loaded stiffened square plates’, Int. J. Impact Eng. , 1995, 16, (2), 273–291.
- J. Wang: ‘Simulation of landmine explosion using LS-DYNA 3D software: Benchmark Work of Simulation of Explosion in Soil and Air’, D.o.D.-W.S.D.A.a.M.R. Laboratory, Editor, DSTO Aeronautical and Maritime Research Laboratory, Australia, 2001.
- F. Doke, M. Meo, A. Wright, M. French and M. Bernabie: ‘Glass/ epoxy composite armours under blast loads’, Proc. 7th Int. Conf. on ‘Composite science and technology’, Sharjah, UAE, January 2009, American University of Sharjah.
- D. W. Hyde: `CONWEP: conventional Weapons Effects Program', US Army Engineer Waterways Experiment Station, USA, 1991.
- G. R. Johnson and W. H. Cook: ‘Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures’, Eng. Fract. Mech. , 1985, 21, (1), 31–48.
- F. K. Chang and K. Y. Chang: ‘A progressive damage model for laminated composites containing stress concentrations’, J. Compos. Mater. , 1987, 21, (9), 834–855.
- S. Bala: Tie-break contacts in LS-DYNA Livermore Software, Livermore Software Technology Corporation, Livermore, CA, USA.
- P. P. M. Lemmen and G. J. Meijer: ‘Failure prediction tool theory and user manual’, TNO Report, 2001.
- ‘LS-DYNA keyword user's manual’, Vol. I-II, v. 971, Editor. 2007, Liveromore Software Technology Corporation, Livermore, CA, USA.
- M. J. Mullin and B. J. O'Toole: ‘Simulation of energy absorbing materials in blast loaded structures’, Proc. 8th Int. LS-DYNA Users Conf., Detroit, MI, USA, May 2004, LSTC and ETA, 67-80.