Process and cost modelling applied to manufacture of complex aerospace composite part

References

• Weimer C, Mitschang P: ‘Preformverfahren’, in ‘Handbuch Verbundwerkstoffe’, (ed. , Neitzel M, Mitschang P), 73–104; 2004, München, Carl Hanser Verlag.
   Google Scholar
• Asareh M, Mills AR, R DD, Cartié: ‘Investigation of preform manufacturing techniques using novel binder coated carbon fibre tows’, Proc. 13th Eur. Conf. on ‘Composite materials’, Stockholm, Sweden, June 2008, ESCM (European Society for Composite Materials).
   Google Scholar
• ‘Materials, process and CAE tools development for pre-impregnated carbon binder yarn preform composites’, PreCarBi-Project Proposal, Project no. 30848, April 2006.
   Google Scholar
• Zouari B, Dumont F, Daniel JL, Boisse P: ‘Analyses of woven fabric shearing by optical method and implementation in a finite element program’, Proc. 6th Esaform, Salerno, Italy, April 2003, V. Brucato, Vol. 1, 875–878.
   Google Scholar
• van der Weeen F: ‘Algorithms for draping fabrics on doubly curved surfaces’. Int. J. Numer. Methods Eng., 1991, 31, (7), 1415–1426.
   Web of Science ®Google Scholar
• Rudd CD, Rice EV, Bulmer LJ, Long AC: ‘Process modeling and design for resin transfer molding’, Plast. Rubber Compos. Process. Appl., 1993, 20, (2), 67–76.
   Web of Science ®Google Scholar
• Picket AK, Queckborner T, de Luca P, Haug E: ‘An explicit finite element solution for the forming prediction of continuous fibre-reinforced thermoplastic sheets’. Compos. Manuf., 1995, 6, (3–4), 237–243.
   Web of Science ®Google Scholar
• Dong L, Lekakou C, Bader MG: ‘Solid-mechanics finite element simulations of the draping of fabrics: a sensitivity analysis’. Composites A, 2000, 31A, (7), 639–652.
   Web of Science ®Google Scholar
• Skordos AA, Monroy Aceves C, Sutcliffe MPF: ‘A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites’ Composites A, 2007, 38A, (5), 1318–1330.
   Web of Science ®Google Scholar
• Pantelakis SpG, Katsiropoulos ChV, Labeas GN, Sibois H: ‘A concept to optimize quality and cost in thermoplastic composite components applied to the production of helicopter canopies’, Composites A, 2009, 40A, 595–606.
   Web of Science ®Google Scholar
• ‘Development and innovation for advanced manufacturing of thermoplastics (DINAMIT)’, CEC final report, EU FP6 Project no. AST3-CT-2003-5022831, Brussels, Belgium, 2007.
   Google Scholar
• Miller A, Dodds N, Hale J, Gibson A: ‘High speed pultrusion of thermoplastic matrix composites’, Composites A, 1998, 29A, 773–782.
   Web of Science ®Google Scholar
• Krebs J, Friedrich K, Bhattacharyya D: ‘A direct comparison of matched-die versus diaphragm forming’, Composites A, 1998, 29A, 183–188.
   Web of Science ®Google Scholar
• Henninger F, Friedrich K: ‘Production of textile reinforced thermoplastic profiles by roll forming’, Composites A, 2005, 35A, 573–583.
   Google Scholar
• ‘Process integrated cost analysis tool (PICANT)’, CEC Final report, BRITE/EURAM II, BRE2, CT92-0169, Brussels, Belgium, 1995.
   Google Scholar
• Wang E, Gutowski T: ‘Cost comparison between thermoplastic and thermoset composites’, SAMPE J., 1990, 26, 19–26.
   Web of Science ®Google Scholar
• Esawi AMK, Ashby MF: ‘Cost estimates to guide pre-selection of processes’, Mater. Des., 2003, 24, 605–616R.
   Web of Science ®Google Scholar
• Bader MG: ‘Selection of composite materials and manufacturing routes for cost effective performance’, Composites A, 2002, 33A, 913–934.
   Web of Science ®Google Scholar
• Barlow D, Howe C, Clayton G, Brouwer S: ‘Preliminary study on cost optimization of aircraft composite structures applicable to liquid moulding technologies’, Compos. Struct., 2002, 57, 53–57.
   Web of Science ®Google Scholar
• Kendall K: ‘Discrete event simulation and cost analysis for manufacturing optimization of an automotive LCM component’, Composites A, 1998, 29A, 711–720.
   Web of Science ®Google Scholar
• Verrey J, Wakeman MD, Michaud V, Manson J: ‘Manufacturing cost comparison of thermoplastic and thermoset RTM for an automotive floor pan’, Composites A, 2006, 37A, 9–22.
   Web of Science ®Google Scholar
• Soremekun GA: ‘Genetic algorithms for composite laminate design optimization’, MS thesis, Department of Engineering Science, Mechanics, Virginia Polytechnic Institute, Blacksburg, VA, USA, 1997.
   Google Scholar
• Schlimbach J, Mitschang P: ‘Process-based cycle time estimation for the thermoplastic tape placement’, J. Thermoplast. Compos. Mater., 2006, 19,507–529.
   Web of Science ®Google Scholar
• Kassapoglou C: ‘Minimum cost and weight design of fuselage frames. Part A: design constraints and manufacturing process characteristics’, Composites A, 1999, 30A, 887–894.
   Web of Science ®Google Scholar
• Kassapoglou C: ‘Minimum cost and weight design of fuselage frames. Part B: cost considerations, optimization and results’, Composites A, 1999, 30A, 895–904.
   Web of Science ®Google Scholar
• Curran R, Ragunathan S, Price M: ‘Review of aerospace cost modelling: the genetic causal approach’, Prog. Aerosp. Sci., 2004, 40, (8), 487–534.
   Web of Science ®Google Scholar
• Weimer C, Roser T, Spanner H, Buchs W: ‘Flexible preform manufacturing based on stitching technology for carbon fibre structural applications’, Proc. CFK-Valley Stade Convention, Stade, Germany, June 2008.
   Google Scholar
• ‘PAM-QUIKFORM’, ESI Group, Rungis-Cedex, France. http://www.esi.group.com
   Google Scholar
• Mack C, Taylor HM: ‘The fitting of woven cloth to surfaces’, J. Text. Inst., 1956, 47, (8), 477–488.
   Google Scholar
• Ruiz E, Achim V, Soukane S, Trochu F, Bréard J: ‘Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites’, Compos. Sci. Technol., 2006, 66, (3–4), 475–486.
   Web of Science ®Google Scholar