REFERENCES
- R. Freeman: ‘The metal molybdenum’, 10-21; 1956, Detroit, MI, American Society for Metals.
- C. Toensing: ‘The metal molybdenum’, 31-47; 1956, Detroit, MI, American Society for Metals.
- T. Patrician, V. Sylvester and R. Daga: Proc. Symp. on ‘Physical metallurgy and technology of molybdenum and its alloys’; Ann Arbor, MI, USA, 1985, AMAX Materials Research Center, 1-11.
- H. Huang and K. Hwang: Metall. Mater. Trans. A, 2002, 33A, 657–664.
- D. Agrawal: J. Mater. Educat. , 1997, 19, (4-6), 49–58.
- R. M. Anklekar, D. K. Agrawal and R. Roy: Powder Metall, 2001, 44, (4), 355–362.
- J. P. Cheng: Mater. Lett. , 2002, 56, (4), 587–592.
- J. P. Cheng: J. Mater. Sci. Lett. , 2001, 20, (1), 77–79.
- J. P. Cheng: Am. Ceram. Soc. Bull, 2000, 79, (9), 71–74.
- J. P. Cheng: J. Mater. Process. Technol. , 2000, 108, (1), 26–29.
- J. P. Cheng, D. K. Agrawal, S. Komarneni, M. Mathis and R. Roy: Mater. Res. Innovat. , 1997, 1, 44–52.
- D. E. Clark and W. H. Sutton: Ann. Rev. Mater. Sci. , 1996, 26, 299–331.
- J. D. Katz: Ann. Rev. Mater. Sci. , 1992, 22, 153–170.
- K. Rodiger: Int. J. Refract. Hard Met. , 1998, 16, (4-6), 409–416.
- R. Roy: Nature, 1999, 399, 688–670.
- B. Vaidhyanathan, D. Agrawal, T. R. Shrout and Y. Fang: Mater. Lett. , 2000, 42, 207–211.
- P. Yadoji: Mater. Sci. Eng. B, Solid-State Mater. Adv. Technol. , 2003, 98, (3), 269–278.
- A. C. Metaxas: Power Eng. 1, 1991, 5, (5), 237–247.
- W. H. Sutton: MRS Bull. , 1993, 18, (11), 22–24.
- E. T. Thostenson: Composites. A, Appl. Sci. Manuf, 1999, 30A, (9), 1055–1071.
- J. P. Cheng: Mater. Res. Innovat. , 2002, 5, (3-4), 170–177.
- R. Peelamedu: J. Mater. Res. , 2004, 19, (6), 1599–1602.
- R. Roy: Mater. Res. Innovat. , 2002, 6, (3), 128–140.
- R. Roy, R. Peelamedu, C. Grimes, J. P. Cheng and D. Agrawal: J. Mater. Res. , 2002, 17, (12), 3008–3011.
- ‘Standard test method for density, oil content, and interconnected porosity of sintered metal structural parts and oil-impregnated bearings’, ASTM standard B 328-96, ASTM, Philadelphia, PA, USA, 2003.
- L. Dillinger: ‘Automatic polishers-suggested procedures for grind-ing and polishing various alloys’, Leco Corp., St. Joseph, MI, USA, 2001, available at: www.leco.com
- J. H. Adair, A. J. Roese and L. G. McCoy: Adv. Ceram. , 1984, 111, 142–156.
- H. G. Krarup, M. M. Mandanas and J. H. Adair: Proc. Fine Powder Process. Int. Conf., University Park, PA, USA, 1999, Pennsylvania State University, 63-70.
- J. D. S. Gurosik: ‘Evaluation of processing conditions for pure molybdenum components manufactured by uni-axial pressing and powder injection molding’, Master's dissertation, Pennsylvania State University, State College, PA, USA, 2003.