References
- F. V. Lenel: ‘Steam treatment of porous iron’, in ‘Powder metallurgy’, (ed. J. Wulff), 512-519; 1942, Cleveland, OH, American Society for Metals.
- R. Kieffer and W. Hotop: `Sintereisen und sinterstahl'; 1948, Wien, Springer-Verlag.
- M. J. Balschin: Pulvermetallurgie'; 1954, Halle (Saale), VEB Wilhelm Knapp Verlag.
- Iliigands iron powder handbook', Hiigands AB, Hiigands, Sweden, 1957-1962.
- F. W. Regel: ‘Die anwendung des dampfbehandlungsverfahrens bei gesinterten eisenteilen’, Werkstatt uns Betrieb, 1963, 96, (8), 52–61.
- P. Franklin and B. L. Davies: ‘The effects of steam oxidation on porosity of sintered iron’, Powder Metall. , 1979, (4), 187–192.
- K. Volenik, H. Volrabova, J. Neid, M. Seberini and J. Cirak: ‘Structure of oxidation products of sintered steel in superheated steam’, Powder Metall. , 1978, (3), 149–154.
- G. F. Bocchini, A. Gallo and I. Montevecchi: ‘Treatment of sintered steel parts in steam atmosphere’, Proc. 2nd Int. Cong. on ‘Heat treatment of materials’, Florence, Italy, April 1982, AIM, 1091-1102.
- G. F. Bocchini, A. Gallo and I. Montevecchi: trattamento inatmosfera di vapore di particolari in acciaio sinterizzato', La metallurgia italiana, 1983, (3), 180–187.
- P. Beiss: ‘Steam treatment of sintered parts’, Proc. World Conf. on ‘Powder metallurgy’, London, UK, July 1990, Institute of Metals, Vol. 1, 488-496.
- G. F. Bocchini: trattamento a vapore dei sinterizzati ferrosi.Uno stato dell'arte', 13° Convegno Nazionale Trattamenti Termici, Salsomaggiore, novembre 1991, AIM, pp. 155-160.
- G. F. Bocchini: ‘Steam treatment of ferrous PM parts’, Proc. PM World Conf., San Francisco, CA, USA, June 1992, MPIF, 77-106.
- A. Gallo and V. Sergi: ‘Cinetica dell'ossidazione a vapore di materiali porosi a base ferro’, 22° Congresso Nazionale Innovazione per la qualità, Bologna, Italy, May 1988, AIM, pp. 326-332.
- S. A. Gallo, A. Vitiello and U. Prisco: ‘On control of Young's modulus of iron sintered part through steam oxidation treatment’, Powder Metall. , 2003, 46, (1), 15–19.
- A. Squire: Report PB 4073, Office of Technical Service, US Department Com, Washington, 1944.
- W. D. Jones: ‘fundamental principles of powder metallurgy’; 1960, London, Edward Arnolds (Publishers), Ltd.
- K. Erhard: ‘Powder metallurgy’, in ‘Metals Handbook’ 9th edn, Vol. 7; 1984, Materials Park, OH, ASM International.
- ‘Materials standard for PM structural parts’, Standard 35, MPIF, Princeton, NJ, USA, 2000.
- M. Eudier: Powder Metall. , 1962, 9, 278–290.
- K. M. Vedula and R. W. Heckel: Mod. Dev. Powder Metall, 1981, 12, 759–775.
- W. A. Spitzing, R. E. Smelser and O. Richmond: Acta Metall, 1988, 36, 1201–1211.
- G. Straffelini, V. Fontanari and A. Molinari: ‘True and apparent Young's modulus in ferrous porous materials’, Mater. Set Eng. A, 1999, A260, 197-202.
- R. Haynes and J. T. Egediege: Powder Metall, 1989, 32, 47–52.
- T. J. Griffiths and A. Ghanizadeh: Powder Metall. , 1986, 29, 129–133.
- J. R. Moon: Powder Metall. , 1989, 32, 132–139.
- B. Kubicky: `Sintered machine elements', 1995, New York, Ellis Horwood.
- J. W. Dally and W. F. Riley: ‘Experimental stress analysis’, 1991, New York, Mc Graw Hill.
- C. Fraser and J. Milne: ‘Integrated electrical and electronic engineering for mechanical engineers’; 1994, New York, Mc Graw Hill.
- M. F. Doerner and W. D. Nix: ‘A method for interpreting the data from depth-sensing indentation instruments’, J. Mater. Res. , 1986, 1, (4), 601–609.
- ‘Universal hardness testing of metallic materials, part 1: test method’, German standard no. DIN 50359-1, 1997.
- W. C. Oliver and G. M. Pharr: ‘An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments’, J. Mater. Res. , 1992, 7, (6), 1564–1583.
- Y. Cheng and C. M. Cheng: ‘What is indentation hardness’, Surf Coat. Technot, 2000, 133-134, 417-424.
- T. A. Venkatesh, K. J. van Vliet, A. E. Giannakopoulos and S. Suresh: `Determinaton of elasto-plastic properties by instru-mented sharp indentation: guidelines for property extraction', Ser. Mater. , 2000, 42, 833–839.
- G. F. Bocchini, B. Rivolta and G. Silva: ‘An application of the universal hardness test to PM materials’, PM World Conference, Orlando, FL, June 2002, MPIF, pp. 11-99 and 11-109.
- G. F. Bocchini, B. Rivolta and R. Gerosa: ‘Universal hardness test to characterize PM steels’, Int. J. Powder Metall. , 2008, 44, (3), 77–84.
- M. Swain (ed.): ‘Materials science and technology, structure and properties of ceramics’, Vol. 11; 1994, Weinheim, VCH.