References
- German RM: ‘Powder injection molding’, 61–62; 1990, Princeton, NJ, MPIF.
- Huang BY, Fan JL, Liang SQ, Qu XH: ‘The rheological and sintering behavior of W-Ni-Fe nano-structured crystalline powder’, J. Mater. Process. Technol., 2003, 137, 177–181.
- Sotomayor ME, Várez A, Levenfeld B: ‘Influence of powder particle size distribution on rheological properties of 316L powder injection moulding feedstocks’, Powder Technol., 2010, 200, 30–36.
- Ahn S, Park SJ, Lee S, Atre SV, German RM: ‘Effect of powders and binders on material properties and molding parameters in iron and stainless powder injection molding process’, Powder Technol., 2009, 193, 162–169.
- Han Y, Fan JL, Liu T, Cheng HC, Tian JM: ‘The effects of ball-milling treatment on the densification behavior of ultra-fine tungsten powder ’, Int. J. Refract. Met. Hard Mater., 2011, 29, 743–750.
- Hosokawa M, Nogi K, Naito M, Yokoyama T: ‘Nanoparticle technology handbook’, 5–10; 2007, Oxford, Elsevier.
- Fan JL: ‘Tungsten alloys and their novel preparation techniques’, 142–143; 2006, Beijing, Metallurgy Industry Press.
- Kim KH, Youn HC, Choi CJ, Lee BT: ‘Fabrication and material properties of powder injection molded Fe sintered bodies using nano Fe powder’, Mater. Lett., 2007, 61, 1218–1222.
- Kim KH, Lee BT, Choi CJ: ‘Fabrication and evaluation of powder injection molded Fe-Ni sintered bodies using nano Fe-50%Ni powder’, J. Alloys Compd, 2010, 491, 391–394.
- Song JH, Evans JRG: ‘The injection molding of fine and ultrafine zirconia powders’, Ceram. Int., 1995, 21, 325–333.
- Xie ZP, Luo JS, Wang X, Li JB, Huang Y: ‘The effect of organic vehicles on the injection molding of ultrafine zirconiapowders’, Mater. Des., 2005, 26, 79–82.
- Supriadi S, Baek ER, Choi CJ, Lee BT: ‘Binder system for STS 316 nanopowder feedstocks in micro-metal injection molding’, J. Mater. Process. Technol., 2007, 187–188, 270–273.
- Ren SB, He XB, Qu XH, Humail IS, Li Y: ‘Effects of binder compositions on characteristics of feedstocks of microsized SiC ceramic injection molding’, Powder Metall., 2007, 50, 255–259.
- Ren SB, He XB, Qu XH, Humail IS, Wei YP: ‘Influence of binder composition on rheological behavior of injection-molded microsized SiC suspensions’, J. Univ. Sci. Technol. Beijing, 2008, 15, 297–301.
- Huang BY, Liang SQ, Qu XH: ‘The rheology of metal injection molding’, J. Mater. Process. Technol., 2003, 137, 132–137.
- Li YM, Qu XH, Huang BY: ‘Evaluation of rheological properties of metal injection molding feedstocks’, J. Mater. Eng., 1999, 7, 32–35.