References
- Mohanty RM, Balasubramanian K and Seshadri SK: ‘Boron carbide-rinforced aluminium 1100 matrix composite: Fabrication and properties’, Mater. Sci. Eng. A, 2008, A498, 42–52.
- Shorowodi KM, Lacoui T, Haseeb ASMA, Celis JP and Froyen L: ‘Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composite: a compatative study’, J. Mater. Process. Technol., 2003, 142, 738–743.
- Mazaheri Y, Meratian M, Emadi R and Najarian AR: ‘Comparison of microstructural and mechanical properties of Al–TiC, Al–B4C and Al–TiC–B4C composites prepared by casting techniques’, Mater. Sci. Eng. A, 2013, A560, 278–287.
- Flumerfelt JF: ‘Aluminium powder metallurgy processing’, PhD thesis, Iowa State University, 1999.
- MacAskill IA, Hexemer RL Jr, Donaldson IW and Bishop DP: ‘Effect of magnesium, tin and nitrogen on the sintering response of aluminium powder’, J. Mater. Process. Technol., 2010, 210, 2252–2260.
- Topcu I, Gulsoy HO, Kadioglu N and Gulluogu AN: ‘Processing and mechanical properties of B4C reinforced Al matrix composites’, J. Alloys Compd, 2009, 482, 516–521.
- Schaffer GB, Hall BJ, Bonner SJ, Huo SH and Sercombe TB: ‘The effect of the atmosphere and the role of pore filling on the sintering of aluminium’, Acta Mater., 2006, 54, 131–138.
- Estrada JL, Duszczyk J and Korevaar BM: ‘Heating sequence and hydrogen evolution in alloyed aluminium powders’, J. Mater. Sci., 1991, 26, 1631–1634.
- Arockiasamy A, German RM, Wang P, Horstemeyer MF, Morgan W and Park SJ: ‘Sintering behavior of Al-6061 powder produced by rapid solidification process’, Powder Metall., 2011, 55, 354–359.
- Ziani A and Pelletier S: ‘Supersolidus liquid phase sintering behviour of degassed 6061 Al powder’, Int. J. Powder Metall., 1999, 35, 49–58.
- Iwamoto K, Yamasaki M and Kawamura Y: ‘Vacuum degassing behavior of rapidly solidified Al-Mn-Zr alloy powder’, Mater. Sci. Eng. A, 2007, 449, 1013–1017.
- Yamasaki M and Kawamura Y: ‘Changes in the surface characteristics of gas atomized pure aluminium powder during vacuum degassing’, Mater. Trans., 2006, 47, 1902–1905.
- Zhang Z, Steven D, Rustin V, Ying L, Troy D, Zhou TY, Schoenung JM and Lavernia EJ: ‘Degassing behavior of nanostructured Al and its composites’, Metall. Mater. Trans. A, 2010, 41A, 532–541.
- Pickens JR: ‘Aluminium powder metallurgy technology for high strength applications’, J. Mater. Sci., 1981, 16, 1437–1457.
- Zhao N and Nash P: ‘Effect of degassing of SiC reinforced 6061 aluminium alloy composites on properties’, Powder Metall., 2001, 44, 333–338.
- Zhang P, Li Y, Wang W, Gao Z and Wang B: ‘The design, fabrication and properties of B4C/Al neutron absorbers’, J. Nucl. Mater., 2013, 437, 350–358.
- Yan M, Yu P, Schaffer GB and Qian M: ‘Secondary phases and interfaces in a nitrogen-atmosphere sintered Al alloy: transmission electron microscopy evidence for the formation of AlN during liquid phase sintering’, Acta Mater., 2010, 58, 5667–5674.
- Srinivasa Rao C and Upadhyaya GS: ‘2014 and 6061 aluminium alloy-based powder metallurgy composites containing silicon carbide particles/fibres’, Mater. Des., 1995, 16, 359–366.
- Lumley RN, Sercombe TB and Schaffer GB: ‘Surface oxide and the role of magnesium during the sintering of aluminium’, Metall. Mater. Trans. A, 1999, 30A, 457–463.