References
- Abenojar J, Velasco F, Bautista A, Campos M, Bas JA and Torralba JM: ‘Atmosphere influence in sintering process of stainless steels matrix composites reinforced with hard particles’, Compos. Sci. Technol., 2003, 63, 69–79.
- Kurgan N and Varol R: ‘Mechanical properties of P/M 316L stainless steel materials’, Powder Technol., 2010, 201, 242–247.
- Rosso M and Grande MA: ‘High density sintered stainless steels with improved properties’, J. Achiev. Mater. Manuf. Eng., 2007, 21, 97–102.
- Tosangthum N, Coovattanachai O, Morakotjinda M, Yotkaew T, Daraphan A, Krataitong R, Vetayanugul B and Tongsri R: ‘Sintering activation of 316L powder using a liquid phase forming powder’, Songklanakarin J. Sci. Technol., 2010, 32, 91–95.
- Garcia C, Martin F, Tiedra P and Cambronero LG: ’Pitting corrosion behaviour of PM austenitic stainless steels sintered in nitrogen–hydrogen atmosphere’, Corros. Sci., 2007, 49, 1718–1736.
- Samal P, Pannell J, Engström U and Mars O: ‘Austenitic stainless steels with enhanced mechanical strength’, Proc. World PM2010 Conf., Florence, Italy, October 2010, European Powder Metallurgy Association (EPMA). Page no:1–8.
- Mariappan R, Kumaran S and Rao TS: ‘Effect of sintering atmosphere on structure and properties of austeno-ferritic stainless steels’, Mater. Sci. Eng. A, 2009, A517, 328–333.
- Pagounis E and Lindroos VK: ‘Processing and properties of particulate reinforced steel matrix composites’, Mater. Sci. Eng. A, 1998, A246, 221–234.
- Patankar SN, Chandrasekaran M and Tan MJ: ‘Matrix reinforcement interaction in SiC/316L stainless steel composite’, J. Mater. Sci. Lett., 2000, 19, 613–615.
- Coovattanachai O, Tosangthum N, Morakotjinda M, Yotkaew T, Krataitong R, Vetayanugul B and Tongsri R: ‘Effect of heating rate on sintered series 300 stainless steel’, Songklanakarin J. Sci. Technol., 2010, 32, 163–167.
- Anklekar RM, Bauer K, Agrawal DK and Roy R: ‘Improved mechanical properties and microstructural development of microwave sintered copper and nickel steel PM parts’, Powder Metall., 2005, 48, 39–46.
- Anklekar RM, Agrawal DK and Roy R: ‘Microwave sintering and mechanical properties of PM copper steel’, Powder Metall., 2001, 44, 355–362.
- Saitou K: ‘Microwave sintering of iron, cobalt, nickel, copper and stainless steel powders’, Scr. Mater., 2006, 54, 875–879.
- Panda SS, Singh V, Upadhyaya A and Agrawal D: ‘Sintering response of austenitic (316L) and ferritic (434L) stainless steel consolidated in conventional and microwave furnaces’, Scr. Mater., 2006, 54, 2179–2183.
- Ertugrul O, Park HS, Onel K and Willert-Porada M: ‘Effect of particle size and heating rate in microwave sintering of 316L stainless steel’, Powder Technol., 2014, 253, 703–709.
- Katz JD: ‘Microwave sintering of ceramics’, Annu. Rev. Mater. Sci., 1992, 22, 153–170.
- Gupta M and Eugene WWL: ‘Microwaves and metals’, Chap. 3, 51; 2007, Singapore, John Wiley & Sons Inc.
- Gerdes T and Willert-Porada M: ‘Microwave sintering of metal–ceramic and ceramic–ceramic composites’, MRS Proc., 1994, 347, 531.
- German RM: ‘Powder metallurgy of iron and steel’, Chap. 6, 206; 1998, New York, John Wiley & Sons Inc.
- Tongsri R and Vetayanugul B: ‘Thermal analysis of Fe–carbide and Fe–C mixtures’, J. Met. Mater. Miner., 2010, 20, 45–49.
- Lin S and Xiong W: ‘Microstructure and abrasive behaviors of TiC–316L composites prepared by warm compaction and microwave sintering’, Adv. Powder Technol., 2012, 23, 419–425.
- Rajkumar K and Aravindan S: ‘Microwave sintering of copper–graphite composites’, J. Mater. Process. Technol., 2009, 209, 5601–5605.
- Annamalai AR, Nekatibeb F, Upadhyaya A and Agrawal DK: ‘Effect of heating mode on sinterability of carbonyl iron compacts’, Mater. Res. Innov., 2013, 17, 10–16.
- Chakthin S, Morakotjinda M, Yodkaew T, Torsangtum N, Krataithong R, Siriphol P, Coovattanachai O, Vetayanugul B, Thavarungkul N, Poolthong N and Tongsri R: ‘Influence of carbides on properties of sintered Fe–base composites’, J. Met. Mater. Miner., 2008, 18, 67–70.
- Sutcu M and Akkurt S: ‘Utilization of recycled paper processing residues and clay of different sources for the production of porous anorthite ceramics’, J. Eur. Ceram. Soc., 2010, 30, 1785–1793.