References
- Lutjering G and Willams JC: ‘Titanium’, 2nd edn; 2007, Berlin, Springer-Verlag.
- Conrad H: Prog. Mater. Sci., 1981, 26, 123–403.
- Qian M: Int. J. Powder Metall., 2010, 46, 45–57.
- Meyers MA, Vohringer O and Lubarda VA: Acta Mater., 2001, 49, 4025–4039.
- Wyatt ZW, Joost WJ, Zhu D and Ankem S: Int. J. Plast., 2012, 39, 119–131.
- Bridier F, Villechaise P and Mendez J: Acta Mater., 2005, 53, 555–567.
- Liu Z and Weisch W: Metall. Trans. A, 1988, 19A, 527–542.
- Yan M, Dargusch MS, Ebel T and Qian M: Acta Mater., 2014, 68, 196–206.
- Hanada S and Izumi O: Metall. Trans. A, 1987, 18A, 265–271.
- Yan M, Luo SD, Schaffer GB and Qian M: Metall. Mater. Trans. A, 2013, 44, 3961–3969.
- Welsch G and Bunk W: Metall. Trans. A, 1982, 13A, 889–899.
- Ogden HR and Jaffee RL: The effects of carbon, oxygen, and nitrogen on the mechanical properties of titanium and titanium alloys, TML Report No. 20, Battelle Memorial Institute, 1995.
- Soeda S, Fujii H, Okano H and Hanaki M: ‘High strength, high ductility titanium-alloy and process for producing the same’, US patent no. 6063211, 2000.
- Hao SM: ‘Thermodynamic analysis of material design’; 2001, Beijing, Chemical Industry Press.
- Hennig RG, Trinkle DR, Bouchet J, Srinvasan SG, Albers RC and Wilkins JW: Nat. Mater., 2005, 4, 129–133.
- Murray JL: ‘The Al–Ti system’, in ‘Phase diagram of binary titanium alloys’, 12; 1987, Metals Park, OH, ASM.
- Kahveci AI and Welsch GE: Scr. Metall., 1986, 20, 1287–1290.
- Huang AJ, Li GP, Hao YL and Yang R: Acta Mater., 2003, 51, 4939–4952.
- Rhodes CG and Paton NE: Metall. Trans. A, 1979, 10A, 1753–1758.
- Sauer C and Lutjering G: Mater. Sci. Eng. A, 2001, A319–A321, 393–397.
- Kim HS, Ra TY, Yeo ID, Bang HJ, Yoo YG and Kim WY: J. Mater. Sci. Technol., 2008, 24, 33–36.
- Prima F, Vermaut P, Texier G, Ansel D and Gloriant T: Scr. Mater., 2006, 54, 645–648.
- Willams JC, Hickman BS and Marcus HL: Metall. Trans., 1971, 2, 1913–1919.
- Lim JY, MaMahon CJ, Pope DP and Williams JC: Metall. Trans. A, 1976, 7A, 139–144.
- Weiss I and Semiatin SL: Mater. Sci. Eng. A, 1999, A263, 243–256.
- Zaefferer S: Mater. Sci. Eng. A, 2003, A344, 20–30.
- Li YG, Blenkinsop PA, Loretto MH, Rugg D and Voice W: Acta Mater., 1999, 47, 2889–2905.
- Wasz ML, Brotzen FR, McLellan RB and Griffin AJ Jr: Inter. Mater. Rev., 1996, 41, 1.
- Imam MA and Feng CR: ‘Role of oxygen on transformation kinetics in timetal-21S titanium alloy’, in ‘Advances in the science and technology of titanium alloy processing’, (ed. Weiss I, Srinivasan R, Bania P J, Eylon D and Semiatin S L), 435–450; 1997, Warrendale, PA, TMS.
- Bania PJ: JOM, 1994, 46, 16–19.
- Simbi DJ and Scully JC: Mater. Lett., 1996, 26, 35–39.
- Oh JM, Lee BG, Cho SW, Lee SW, Choi GS and Lim JW: Met. Mater. Int., 2011, 17, 733–736.
- Ouchi C, Iizumi H and Mitao S: Mater. Sci. Eng. A, 1998, 243, 186–195.
- Ivasishin OM, Savvakin DG, Froes FH, Mokson VC and Bondareva KA: Powder Metall. Met. Ceram., 2002, 41, 382–389.
- Bolzoni L, Ruiz-Navas EM and Gordo E: Mater. Des., 2014, 60, 226–232.
- Wang HT, Fang ZZ and Sun P: Int. J. Powder Metall., 2010, 46, 45–57.
- Wei QQ, Wang LQ, Fu YF, Qin JN, Lu WJ and Zhang D: Mater. Des., 2011, 32, 2934–2939.
- Nakai M, Niinomi M, Akahori T, Tsutsumi H and Ogawa M: Mater. Trans., 2009, 50, 2716–2720.
- Miura H: ‘The influence of density and oxygen content on the mechanical properties of injection molded Ti–6Al–4V alloys’, in ‘Advances in powder metallurgy & particulate materials’, 46–53; 2010, Princeton, NJ, Metal Powder Industries Federation (MPIF).
- Ebel T, Ferri OM, Limberg W, Oehring M, Pyczak F and Schimansky F.-P: Key Eng. Mater., 2012, 520, 153–160.
- Baufeld B, Brandl E and van der Biest O: J. Mater. Process. Technol., 2011, 211, 1146–1158.
- Baufeld B, Van der Biest O and Gault R: Mater. Des., 2010, 31, S106–S111.
- Brandl E, Palm F, Michailov V, Viehweger B and Leyens C: Mater. Des., 2011, 32, 4665–4675.
- Facchini L, Magalini E, Robotti P, Molinari A, Hoges S and Wissenbach K: Rapid Prototyp. J. 2010, 16, 450–459.
- Hrabe N and Quinn T: Mater. Sci. Eng. A, 2013, A573, 264–270.
- Hrabe N and Quinn T: Mater. Sci. Eng. A, 2013, A573, 271–277.
- Lenders S, Thone M, Riemer A, Niendorf T, Troster T, Richard HA and Maier HJ: Int. J. Fatigue, 2013, 48, 300–307.
- Murr LE, Esquivel EV, Quinones SA, Gaytan SM, Lopez MI, Martinez EY, Medina F, Hernandez DH, Martinez E, Martinez JL, Stafford SW, Brown DK, Hoppe T, Meyers W, Lindhe U and Wicker RB: Mater. Charact., 2009, 60, 96–105.
- Wang FD, Williams S, Colegrove P and Antonysamy AA: Metall. Mater. Trans. A, 2013, 44A, 968–977.
- Al-Bermani SS, Blackmore ML, Zhang W and Todd I: Metall. Mater. Trans. A, 2010, 41A, 3422–3434.
- Facchini L, Magalini E, Robotti P and Molinari A: Rapid Prototyp. J., 2009, 15, 171–178.
- Rafi HK, Starr TL and Stucker BE: Int. J. Adv. Manuf. Technol., 2013, 69, 1299–1309.
- Vilaro T, Colin C and Bartout JD: Metall. Mater. Trans. A, 2011, 42A, 3190–3199.
- Sankaran KK, Sastry SML and O’Neal JE: Metall. Trans. A, 1980, 11A, 196–198.
- Sastry SML, Meschter PJ and O’Neal JE: Metall. Trans. A, 1984, 15A, 1451–1463.
- Sastry SML, Meschter PJ, O’Neal JE, Lederich RJ and Rath BB: J. Mater. Sci., 1979, 14, 179–183.
- Sastry SML, Peng TC and Beckerman LP: Metall. Trans. A, 1984, 15A, 1465–1474.
- Naka S, Marty M and Octor H: J. Mater. Sci., 1987, 22, 887–895.
- Yan M, Liu Y, Liu YB, Kong C, Schaffer GB and Qian M: Scr. Mater., 2012, 67, 491–494.
- Yan M, Liu Y, Schaffer GB and Qian M: Scr. Mater., 2013, 68, 63–66.
- Yang YF, Luo SD, Schaffer GB and Qian M: Mater. Sci. Eng. A, 2013, A573, 166–174.
- Wang B, Liu Y and Liu YB: Mater. Sci. Eng. Powder. Metall., 2011, 16, 136–142.
- Liu Y, Wang B, Qiu J and Tang HP: Mater. Manuf. Process., 2010, 25, 735–739.
- Tang HP, Huang BY, Liu HY, Huang ZY, Liu Y and Ouyang HW: Rare Met. Mater. Eng., 2004, 33, 43–46.
- Liu Y, Chen LF, Wei W, Tang HP, Liu CT, Liu B and Huang BY: J. Mater. Sci. Technol., 2006, 22, 465–469.
- Liu Y, Liu YB, Wang B and Tang HP: Key Eng. Mater., 2012, 520, 41–48.
- Liu B, Li YP, Matsumoto H, Liu YB, Liu Y and Chiba A: Mater. Sci. Eng. A, 2011, A528, 2345–2352.
- Tang H, Lu S, Jia W, Yang G and Qian M: Int. J. Powder Metall., 2014, 50, 57–64.
- Zeng LY, Zhao YQ, Hong Q and Yang GJ: J. Alloys Compd, 2011, 5, 2081–2086.
- http://www.mineralprices.com (assessed on 1st April 2014).