References
- Q. Guan, C. X. Zhang and D. L. Guo: Weld. World (UK), 1994, 33, 308–313.
- Q. Guan: Weld. World (UK), 1999, 43, 64–74.
- Q. Guan, D. L. Guo, C. Q. Li and R. H. Leggatt: Weld. World (UK), 1994, 33, 160–167.
- J. Gabzdyl, M. Cole, S. W. Williams and D. Price: Proc. 20th Int. Cong. on ‘Applications of lasers and electro-optics’, Orlando, FL, USA, October 2001, Laser Institute of America, 1236–1245.
- D. Dye, S. M. Roberts, A. M. Korsunsky, K. E. James, B. Benn and R. C. Read: ‘Mathematical modelling of welding phenomena’, Vol. 6, 751–765; 2002, Graz, Austria, Maney.
- D. Bertaso, G. Melton, R. Jones and C. Hardy: Proc. Int. Conf. on ‘Metal fabrication and welding technology’, 87–94; 2003, Nottingham, UK, University of Nottingham.
- N. Bagshaw, E. Olden and D. Bertaso: ‘Numerical simulation and experimental validation of low stress no distortion (lsnd) welding in 304 stainless steel’, Report 780/2003, The Welding Institute (TWI), Cambridge, UK, 2003.
- E. M. van der Aa, I. M. Richardson and M. J. M. Hermans: Proc. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, May 2005, ASM International.
- J. Li, Q. Guan, Y. Shi, D. Guo, Y. Du and Y. Sun: J. Mater. Process. Technol., 2004, 147, 328–335.
- J. Li, Q. Guan, Y. W. Shi and D. L. Guo: Sci. Technol. Weld. Join., 2004, 9, 45–58.
- K. Masubuchi: ‘Analysis of welded structures’, Part 1, 642; 1980, New York, Pergamon Press.
- K. Satoh: Trans. JWRI, 1972, 3, 125–134.
- J. Goldak, A. Chakravarti and M. Bibby: Metall. trans. B, 1984, 15B, 299–305.
- E. M. van der Aa: ‘Finite element modelling of temperature profiles, distortions and residual stresses due to tig welding’, Master’s dissertation, Delft University of Technology, Delft, the Netherlands, 2003.
- D. Radaj: ‘Heat effects of welding’, 348; 1992, Berlin, Springer-Verlag.
- J. K. Hong, P. Dong and C. L. Tsai: Proc. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, June 1998, ASM International, 999–1004.
- P. Dong: Proc. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, April 2002, ASM International, 815–825.