- P. H. Morton and T. Bell: Proc 6th World Conf. on ‘Titanium’, (ed. P. Lacombe et al), les editions de physique, 1705-1712; Canne, France, June 1988, Société Francaise de Métallurgie.
- A. Bloyce, H. Dong and B. Hanson: Proc. 8th World Conf. on ‘Titanium’, (ed. P. A. Blenkinsop et al), 1975-1982; Birmingham, UK, October 1995, London, The Institute of Materials.
- H. Dong and T. Bell: Proc. 10th World Conf. on ‘Titanium’, (ed. G. Liitjering and J. Albrecht), 867-874; Hamburg, Germany, July 2003, DGM/Wiley-VCH Verlag GmbH & Co. KGaA.
- A. Walker, J. Folkes, W. M. Steen and D. R. F. West: Surf Eng. , 1985, 1, 23–29.
- H. W. Bergmann: Z. Werkstofftech. , 1985, 16, 392–405.
- T. Bell, H. W. Bergmann, J. Lanagan, P. H. Morton and A. M. Staines: Surf Eng. , 1986, 2, 133–143.
- J. P. Massoud and G. Coquerelle: Proc. 6th World Conf. on ‘Titanium’, (ed. P. Lacombe et at), les editions de physique, 1847-1852; Canne, France, June 1988, Société Francaise de Métallurgie.
- H. Xin and T. N. Baker: Proc. 8th World Conf. on ‘Titanium’, (ed. P. A. Blenkinsop et al), 2031-2038; Birmingham, UK, October 1995, London, The Institute of Materials.
- A. Weisheit and B. L. Mordike: Surf Eng. , 1995, 11, 160–161.
- J. M. Robinson, S. Anderson, R. D. Knutsen and R. C. Reed: Mater. Sci. TechnoL, 1995, 11, 611–618.
- J. M. Robinson and R. C. Reed: Wear, 1995, 186-187, 360-367.
- C. Gerdes, A. Karimi and H. W. Bieler: Wear, 1995, 186-187, 368-374.
- J. de Damborena, B. Fernandez, V. Lopez and A. J. Vazques: Int. J. Mater. Prod Technot, 1996, 11, 301–309.
- J. E. Masse and J. F. Mathieu: Mater. Manuf Process. , 1996, 11, 207–214.
- C. Hu and T. N. Baker: J. Mater. Set, 1997, 32, 2821–2826.
- S. Mridha and T. N. Baker: J. Mater. Process. TechnoL, 1998, 77, 115–121.
- S. Bonb, B. Brenner and E. Beyer: Mat.-wiss. Werkstofftech. , 2001, 32, 160–165.
- S. Bonb, B. Brenner, H.-J. Scheibe and E. Beyer: Proc. 10th World Conf. on ‘Titanium’, 1001-1008; Hamburg, Germany, July 2003, DGM/Wiley-VCH Verlag GmbH & Co. KGaA.
- H. C. Man, Z. D. Cui, T. M. Yue and F. T. Cheng: Mater. Sci. Eng. A, 2003, A355, 167-173.
- C. Hu, S. Mridha, H. S. Ubhi, P. Holdway, A. W. Bowen and T. N. Baker: Proc. 8th World Conf. on ‘Titanium’, (ed. P. A. Blenkinsop et al), 1959-1966; Birmingham, UK, October 1995, London, The Institute of Materials.
- L. Xue, M. Islam, A. K. Koul, B. Bibby and W. Wallace: Adv. Perform. Mater. , 1997, 4, 389–408.
- C. Hu, H. Xin, L. M. Watson and T. N. Baker: Acta Mater. , 1997, 45, 4311–4322.
- H. Xin, L. M. Watson and T. N. Baker: Acta Mater. , 1998, 46, 1949–1961.
- H. Xin, C. Hu and N. Baker: J. Mater. Sci. , 2000, 35, 3373–3382.
- M. S. Selamat, T. N. Baker and L. M. Watson: J. Mater. Process. Technol. , 2001, 113, 509–515.
- J. Kaspar, A. Luft, S. BonB and B. Brenner: Proc. Conf. on Nitrieren, Stickstoff im Randgefuge metallischer Werkstoffe’, (ed. J. Grosch and E. J. Mittermeijer), 207-216; 2002, Aachen, AWT.
- J. Kaspar, A. Luft, S. BonB, B. Winderlich and B. Brenner: Proc. 10th World Conf. on ‘Titanium’, (ed. G. Liitjering et al), 949-956; Hamburg, Germany, July 2003, DGM/Wiley-VCH Verlag GmbH & Co. KGaA.
- U. Draugelates, R. Reiter and B. Holzmiiller: Proc. Conf. on `Reibung und verschleiB’, (ed. K.-H. zum Gahr), 197-202; 1996, Bad Nauheim, DGM Informationsges.-Verl.
- Y. Fu, H. Du and Y. Gu: J. Mater. Eng. Perform. , 2000, 9, 571–578.
- S. Bonb: `Struktur und eigenschaften lasergaslegierter randschich-ten’, thesis, Fraunhofer IRB Verlag, Stuttgart, Germany, 2000.
- J. Kaspar, J. Bretschneider, B. Winderlich and B. Brenner: Mater. Sci. Eng. A, to be published.
- R. Boyer, G. Welsch and E. W. Collings: ‘Materials properties handbook: titanium alloys’; 1994, Materials Park, OH, ASM International.
- J. L. Murray: ‘Phase diagrams of binary titanium alloys’, 176–186; 1990, Materials Park, OH, ASM International.
- H. Rieger: `Kavitation und tropfenschlagverschleiB’; 1977, Karlsruhe, Werkstofftechnische Verlagsgesellschaft mbH.
- R. H. Richmann and W. P. McNaughton: Wear, 1990, 140, 63–82.
Microstructure, hardness and cavitation erosion behaviour of Ti–6Al–4V laser nitrided under different gas atmospheres
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.