- J. C. Ion: ‘Laser processing of engineering materials’, Chapter 4, ‘Systems for material processing’; 2005, Oxford, Elsevier.
- J. Feng, M. G. S. Ferreira and R. Vilar: ‘Laser cladding of Ni—Cr—A1203 composite coatings on AISI 304 stainless steel’, Surf Coat. Technot , 1996, 88, 212–218.
- K. H. Lo, C. T. Kwok, E. T. Cheng and H. C. Man: ‘Corrosion resistance of laser fabricated metal-matrix composite layer on stainless steel 316L’, J. Laser Appl, 2003, 15, 107–114.
- S. Yu, Y. Liu, L. Ren and W. Li: ‘Development of laser-cladding layers containing nano-A1203 particles for wear-resistance materi-als’, Metall Mater. Trans. A, 2006, 37A, 3639–3645.
- A. Schiissler: ‘Microstructure and properties of laser processed com-posite layers’, in ‘Laser treatment of materials’, (ed. B. L. Mordike), 287-292; 1992, New York, DGM Metallurgy Information.
- P. Wu, C. Z. Thou and X. N. Tang: `Microstructural characteriza-tion and wear behaviour of laser cladded nickel-based and tungsten carbide composite coatings’, Surf Coat. Technol., 2003, 166, 84–88.
- M. Cadenas, R. Vijande, H. J. Montes and J. M. Sierra: ‘Wear behaviour of laser cladded and plasma sprayed WC—Co coatings’, Wear, 1997, 212, 244–253.
- Z. Liu, L. Jian and W. Tao: ‘Preparation of WC—Co composite powder by electroless plating and its Application in laser cladding’, Mater. Lett., 2006; 60, 1956–1959.
- G. J. Xu and M. Kutsuma: ‘Cladding with Stellite 6 +WC using a YAG laser robot system’, Surf Eng., 2006, 22, 345–252.
- D. Chen, L. C. Lim and M. Qian: ‘Laser cladding of WC—Ni composite’, J. Mater. Process. Technol., 1996, 62, 321–323.
- P.-Z. Wang, J.-X. Qu and H.-S. Shao: ‘Cemented carbide reinforced nickel-based alloy coating by laser cladding and the wear characteristics’, Mater. Des., 1996, 17, (5/6), 289-296.
- K. van Acker, D. Vanhoyweghen, R. Persoons and J. Vangrunderbeek: ‘Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings’, Wear, 2005, 258, 194–202.
- G. L. Goswami, S. Kumar, R. Galun and B. L. Mordike: ‘Laser cladding of nickel based carbide dispersion alloys for hardfacing Applications’, Lasers Eng., 2003, 13, 3514.
- P. Wu, H. M. Du, X. L. Chen, Z. Q. Li, H. L. Bai and E. Y. Jiang: ‘Influence of WC particle behaviour on the wear resistance proper-ties of Ni—WC composite coatings’, Wear, 2004, 257, 142–147.
- W. Cerri, R. Martinella and G. P. Mor: ‘Laser deposition of carbide-reinforced coatings’, Surf Coat. Technol., 1991, 49,40–45.
- B. D. Zhu, X. Y. Zeng, Z. Y. Tao, S. G. Yang and K. Cui: ‘Coarse cemented WC particle ceramic—metal composite coatings produced by laser cladding’, 1993, Wear, 170, 161-166.
- T. Zhao, X. Cai, S. X. Wang and S. Zheng: ‘Effect of Ce02 on microstructure and corrosive wear behavior of laser-cladded Ni/ WC coating’, Thin Solid Films, 2000, 379, (1-2), 128–132.
- J. R. Davis: ‘Surface engineering for corrosion and wear resistance’, 62; 2001, Materials Park, OH, ASM International.
- C. T. Kunioshi, O. V. Correa and L. V. Ramanathan: ‘High temperature oxidation and erosion—oxidation behaviour of HVOF sprayed Ni-20Cr, WC-20Cr-7Ni and Cr3C2—Ni-20Cr coatings’, Surf Eng., 2006, 22, (2), 121–127.
- D.-W. Zhang and T. C. Lei: ‘The microstructure and erosive—corrosive wear performance of laser-clad Ni—Cr3C2 composite coating’, Wear, 2003, 255, 129–133.
- S. S. Babu, R. P. Martukanitz, K. D. Parks and S. A. David: ‘Toward prediction of microstructural evolution during laser surface alloying’, Metall. Mater. Trans. A, 2002, 33A, 1189–1200.
- K. C. Ludema: ‘Friction, wear, lubrication — a textbook in Tribology’, Chapter 8, ‘Wear’; 1996, Boca Raton, FL, CRC Press.
- S. W. Huang, M. Samandi and M. Brandt: ‘Abrasive wear performance and microstructure of laser clad WC/Ni layers’, Wear, 2004, 256, 1095-1105.
Surface Engineering
Volume 26, 2010 - Issue 1-2: In memory of Tom Bell