On microstructure and fatigue characterisation of cast iron alloyed with PTA deposits

References

• Willidal Th, Bauer W, Schumacher P: ‘Stress/strain behaviour and fatigue limit of grey cast iron’, Mater. Sci. Eng. A, 2005, A413–A414, 578–582.
   Google Scholar
• Bertolino G, Perez-Ipina JE: ‘Geometrical effects on lamellar grey cast iron fracture toughness’, J. Mater. Process. Technol., 2006, 179, 202–206.
   Web of Science ®Google Scholar
• Ramadan M, Takita M, Nomura H: ‘Effect of semi-solid processing on solidification microstructure and mechanical properties of gray cast iron’, Mater. Sci. Eng. A, 2006, A417, 166–173.
   Web of Science ®Google Scholar
• James MN, Li WF: ‘Fatigue crack growth in austempered ductile and grey cast irons–stress ratio effects in air and mine water’, Mater. Sci. Eng. A, 1999, A265, 129–139.
   Google Scholar
• Tong X, Zhou H, Zhang W, Zhang Z.-H, Ren L.-Q: ‘Thermal fatigue behavior of gray cast iron with striated biomimetic non-smooth surface’, J. Mater. Process. Technol., 2008, 206, 473–480.
   Web of Science ®Google Scholar
• Tong X, Li F.-H, Liu M, Dai M.-J, Zhou H: ‘Thermal fatigue resistance of non-smooth cast iron treated by laser alloying with different self-fluxing alloys’, Opt. Laser Technol., 2010, 42, 1154–1161.
   Web of Science ®Google Scholar
• Tong X, Zhou H, Chen WW, Jiang W, Xian ZL, Ren LQ, Zhang ZH: ‘Effects of pre-placed coating thickness on thermal fatigue resistance of cast iron with biomimetic non-smooth surface treated by laser alloying’, Opt. Laser Technol., 2009, 41, 671–678.
   Web of Science ®Google Scholar
• Li S.-B, Xiang W.-H, Zhai H.-X, Zhou Y: ‘Formation of TiC hexagonal platelets and their growth mechanism’, Powder Technol., 2008, 185, 49–53.
   Web of Science ®Google Scholar
• Ramachandran CS, Balasubramanian V, Varahamoorthy R, Babu S: ‘Dry sliding wear behaviour of plasma transferred arc hardfaced colmonoy surface’, Surf. Eng., 2009, 25, (6), 440–448.
   Web of Science ®Google Scholar
• Ozel S, Kurt B, Somunkiran I, Orhan N: ‘Microstructural characteristic of NiTi coating on stainless steel by plasma transferred arc process’, Surf. Coat. Technol., 2008, 202, 3633–3637.
   Web of Science ®Google Scholar
• Sudha C, Shankar P, SubbaRao RV, Thirumurugesan R: ‘Microchemical and microstructural studies in a PTA weld overlay of Ni–Cr–Si–B alloy on AISI 304L stainless steel’, Surf. Coat. Technol., 2008, 202, 2103–2112.
   Web of Science ®Google Scholar
• Eroglu M, Ozdemir N: ‘Tungsten-inert gas surface alloying of a low carbon steel’, Surf. Coat. Technol., 2002, 154, 209–217.
   Web of Science ®Google Scholar
• Wu HY, Zhang PZ, Xu Z: ‘Study on nanomechanical and high temperature tribological behaviour of Ti2AlNb based alloys by plasma surface alloying’, Surf. Eng., 2008, 24, (6), 464–469.
   Web of Science ®Google Scholar
• Skarvelis P, Papadimitriou GD: ‘Plasma transferred arc composite coatings with self lubricating properties, based on Fe and Ti sulfides: microstructure and tribological behavior’, Surf. Coat. Technol., 2009, 203, 1384–1394.
   Web of Science ®Google Scholar
• Bourithis L, Papadimitriou GD: ‘The effect of microstructure and wear conditions on the wear resistance of steel metal matrix composites fabricated with PTA alloying technique’, Wear, 2009, 266, 1155–1164.
   Web of Science ®Google Scholar
• Jiang WP, Molian P: ‘Nanocrystalline TiC powder alloying and glazing of H13 steel using a CO2 laser for improved life of die-casting dies’, Surf. Coat. Technol., 2001, 135, 139–149.
   Web of Science ®Google Scholar
• Bourithis L, Milonas A, Papadimitriou GD: ‘Plasma transferred arc surface alloying of a construction steel to produce a metal matrix composite tool steel with TiC as reinforcing particles’, Surf. Coat. Technol., 2003, 165, 286–295.
   Web of Science ®Google Scholar
• Wang XH, Zhang M, Zou ZD, Qu SY: ‘In situ production of Fe–TiC surface composite coatings by tungsten-inert gas heat source’, Surf. Coat. Technol., 2006, 200, 6117–6122.
   Web of Science ®Google Scholar
• Ramachandran CS, Balasubramanian V, Varahamoorthy R, Babu S: ‘Effect of experimental parameters on erosive abrasive wear behaviour of cobalt based (stellite) plasma transferred arc hardfaced surface’, Surf. Eng., 2009, 25, (6), 458–469.
   Web of Science ®Google Scholar
• Ji LB, Hu SB, Shi KY, Huang QW, Xu W: ‘Microstructures of plasma surface strengthened Mo-Cr cast iron used in mould’, Heat Treat. Met., 2011, 36, (6), 7–13.
   Google Scholar
• Shi KY, Hu SB, Xu W, Huang QW: ‘Surface treatment of 45 steels by plasma beam alloying and plasma Surface Quenching’, Adv. Mater. Res., 2010, 129–131, 1109–1113.
   Google Scholar
• Sih GC: ‘Handbook of stress-intensity factor’; 1973, Bethlehem, PA, Lehigh University.
   Google Scholar
• Kac S, Kusinski J: ‘SEM and TEM microstructural investigation of high-speed tool steel after laser melting’, Mater. Chem. Phys., 2003, 81, 510–512.
   Web of Science ®Google Scholar
• Lin YC, Wang SW: ‘Microstructure of TiC-W alloying on steel in nanoscale’, Wear, 2004, 256, 720–725.
   Web of Science ®Google Scholar
• Bourithis L, Papaefthymiou S, Papadimitriou GD: ‘Plasma transferred arc boriding of a low carbon steel: microstructure and wear properties’, Appl. Surf. Sci., 2002, 200, 203–218.
   Web of Science ®Google Scholar
• Gonzalez-Hermosilla WA, Chicot D, Lesage J, la Barbera-Sosac JG, Gruescu IC: ‘Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray’, Mater. Sci. Eng. A, 2010, A527, 6551–6561.
   Google Scholar
• Tsay LW, Liu YC, Lin D.-Y, Young MC: ‘The use of laser surface-annealed treatment to retard fatigue crack growth of austenitic stainless steel’, Mater. Sci. Eng. A, 2004, A328, 177–183.
   Google Scholar
• Sivapragash M, Lakshminarayanan PR, Karthikeyan R, Raghukandan K, Hanumantha M: ‘Fatigue life prediction of ZE41A magnesium alloy using Weibull distribution’, Mater. Des., 2008, 29, 1549–1553.
   Web of Science ®Google Scholar
• Shan D, Nayeb-Hashemi H: ‘Fatigue-life prediction of SiC aluminum composite using a Weibull model’, NDT E Int., 1999, 32, 265–274.
   Web of Science ®Google Scholar
• Sakin R, Ay I: ‘Statistical analysis of bending fatigue life data using Weibull distribution in glass-fiber reinforced polyester composites’, Mater. Des., 2008, 29, 1170–1181.
   Web of Science ®Google Scholar
• Ibrahim A, Berndt CC: ‘Fatigue and deformation of HVOF sprayed WC–Co coatings and hard chrome plating’, Mater. Sci. Eng. A, 2007, A456, 114–119.
   Google Scholar
• Kim KR, Suh CM, Murakami RI, Chung CW: ‘Effect of intrinsic properties of ceramic coatings on fatigue behavior of Cr–Mo–V steels’, Surf. Coat. Technol., 2003, 171, 15–23.
   Web of Science ®Google Scholar
• Ibrahim A, Lima RS, Berndt CC, Marple BR: ‘Fatigue and mechanical properties of nanostructured and conventional titania (TiO2) thermal spray coatings’, Surf. Coat. Technol., 2007, 201, 7589–7596.
   Web of Science ®Google Scholar
• Sun YH, Hanaki S, Yamashita M, Uchida H, Tsujii H: ‘Fatigue behavior and fractography of laser-processed hot work tool steel’, Vacuum, 2004, 73, 655–660.
   Web of Science ®Google Scholar
• Song RC, Hanaki S, Yamashita M, Uchida H: ‘Reliability evaluation of a laser repaired die-casting die’, Mater. Sci. Eng. A, 2008, A483–A484, 343–345.
   Google Scholar
• Cruz Pde la, Oden M, Ericsson T: ‘Effect of laser hardening on the fatigue strength and fracture of a B–Mn steel’, Int. J. Fatigue, 1998, 20, (5), 389–398.
   Web of Science ®Google Scholar
• Doong J.-L, Tan Y.-H: ‘Effect of laser surface alloying chromium onto AISI 1018 steel on the fatigue crack growth rate’, Int. J. Fatigue, 1989, 4, 239–248.
   Google Scholar
• Hwang J.-R, Fung C.-P: ‘Effect of electron beam surface hardening on fatigue crack growth rate in AISI 4340 steel’, Surf. Coat. Technol., 1996, 80, 271–278.
   Web of Science ®Google Scholar
• Tong X, Zhou H, Chen L, Zhang Z.-H, Ren L.-Q: ‘Effects of C content on the thermal fatigue resistance of cast iron with biomimetic non-smooth surface’, Int. J. Fatigue, 2008, 30, 1125–1133.
   Web of Science ®Google Scholar
• Tong X, Zhou H, Chen L, Zhang Z.-H, Ren L.-Q: ‘Effects of graphite shape on thermal fatigue resistance of cast iron with biomimetic non-smooth surface’, Int. J. Fatigue, 2009, 31, 668–677.
   Web of Science ®Google Scholar