References
- Sola A, Bellucci D, Cannillo V, Cattini A: ‘Bioactive glass coatings: a review’, Surf. Eng., 2011, 27, (8), 560–572.
- Fernandes FAP, Heck SC, Picon CA, Totten GE, Casteletti LC: ‘Wear and corrosion resistance of pack chromised carbon steel’, Surf. Eng., 2012, 28, (5), 313–317.
- Kim KM, Kim JH, Lee YY, Kim KY: ‘Effect of immersion in NaOH solution on ferritic steel as a bipolar plate for polymer electrolyte membrane fuel cells’, Int. J. Hydrogen Energy, 2011, 36, 13014–13021.
- Sakai RT, da Cruz FMDL, de Melo HG, Benedetti AV, Santilli CV, Suegama PH: ‘Electrochemical study of TEOS, TEOS/MPTS, MPTS/MMA and TEOS/MPTS/MMA films on tin coated steel in 3·5% NaCl solution’, Prog. Org. Coat., 2012, 74, 288–301.
- Rohr V, Schütze M: ‘Diffusion coatings for heat exchange materials’, Surf. Eng., 2004, 20, (4), 266–274.
- De Araujo P, Steyer P, Millet J.-P, Damond E, Stauder B, Jacquot P: ‘PVD, aluminium alloy coatings: environmentally friendly alternative to protect steel parts against corrosion’, Surf. Eng., 2003, 19, (4), 304–309.
- Iost A, Bigot R, Barbieux F, Vast P: ‘Mechanical behavior of metaphosphate glasses used as coating on metals in relation to their structure and preparation method’, J. Mater. Sci., 1999, 34, 3991–3996.
- Kaur B, Singh K, Pandey OP: ‘Microstructural study of Crofer 22 APU–glass interface for SOFC application’, Int. J. Hydrogen Energy, 2012, 37, 3839–3847.
- Jamnapara NI, Frangini S, Avtani DU, Nayak VS, Chauhan NL, Jhala G, Mukherjee S, Khanna AS: ‘Microstructural studies of electrospark deposited aluminide coatings on 9Cr steels’, Surf. Eng., 2012, 28, (9), 700–704.
- Kaur B, Singh K, Pandey OP: ‘Microstructural analysis of glass–steel interface’, Surf. Coat. Technol., 2013.
- Alavi SH, Dehghanian C, Taheri P: ‘Investigation of corrosion behaviour of carbon steel coated by pulsed plasma electrolytic boronising technique in 3·5 wt-% NaCl aqueous solution’, Surf. Eng., 2011, 27, (7), 509–514.
- Verdian MM, Salehi M, Raeissi K: ‘Microstructure formation and properties of HVOF sprayed NiTi coatings prepared from amorphous/nanocrystalline NiTi powders’, Surf. Eng., 2010, 26, (6), 491–496.
- Jiang J, Wang Y, Zhong Q, Zhou Q, Zhang L: ‘Preparation of Fe2B boride coating on low-carbon steel surfaces and its evaluation of hardness and corrosion resistance’, Surf. Coat. Technol., 2011, 206, 473–478.
- Vijayakumar J, Mohan S: ‘Comparative study of microstructure and corrosion properties in 3·5% NaCl solution of electrodeposited nickel obtained from various baths’, Surf. Eng., 2011, 27, (1), 32–36.
- Liu C, Bi Q, Leyland A, Matthews A: ‘An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0·5 N NaCl aqueous solution. Part I: establishment of equivalent circuits for EIS data modelling’, Corros. Sci., 2003, 45, (6), 1243–1256.
- Macdonald JR: ‘Impedance spectroscopy emphasizing solid materials and systems’; 1987, New York, John Wiley & Sons.
- Sarmento VHV, Schiavetto MG, Hammer P, Benedetti AV, Fugivara CS, Suegama PH: ‘Corrosion protection of stainless steel by polysiloxane hybrid coatings prepared using the sol–gel process’, Surf. Coat. Technol., 2010, 204, 2689–2701.
- Zhang X, van den Bos C, Sloof WG, Terryn H, Hovestad A, de Wit JHW: ‘Investigation of Cr(III) based conversion coatings on Electrogalvanised Steel’, Surf. Eng., 2004, 20, (4), 244–250.
- Subramanian B, Ashok K, Subramanian K, Sastikumar D, Selvan G, Jayachandran M: ‘Evaluation of corrosion and wear resistance titanium nitride (TiN) coated on mild steel (MS) with brush plated nickel interlayer’, Surf. Eng., 2009, 25, (7), 490–495.
- Calata JN, Lu G, Chuang T: ‘Constrained sintering of glass, glass–ceramic and ceramic coatings on metal substrates’, Surf. Interface Anal., 2001, 31, 673–681.
- Ashrafi A, Golozar MA, Mallakpour S: ‘Corrosion behaviour of 316L stainless steel coated by amorphous and semicrystalline polypyrrole’, Surf. Eng., 2009, 25, (2), 120–126.
- Datta S, Das S: ‘A new high temperature resistant glass-ceramic coating for gas turbine engine components’, Bull. Mater. Sci., 2005, 28, 689–696.