Elastic anisotropy of coatings by AFM analysis of microindentations

References

• Freund L. B. and Suresh S.: ‘Thin film materials, stress, defect formation and surface evolution’, 167–232; 2004, Cambridge University Press.
   Google Scholar
• Oliver W. C. and Pharr G. M.: ‘An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments’ J. Mater. Res., 1992, 7, 1564–1583.
   Web of Science ®Google Scholar
• Xiaodong L. and Bhushan B.: ‘A review of nanoindentation continuous stiffness measurement technique and its applications’, Mater. Charact., 2002, 48, 11–36.
   Web of Science ®Google Scholar
• Malkow T. and Bull S. J.: ‘Hardness measurements on thin IBAD CNx films – a comparative study’, Surf. Coat. Technol., 2001, 137, 197–204.
   Web of Science ®Google Scholar
• Antunes J. M., Cavaleiro A., Menezes L. F., Simoes M. I. and Fernandes J. V.: ‘Ultra-microhardness testing procedure with Vickers indenter’, Surf. Coat. Technol., 2002, 149, 27–35.
   Web of Science ®Google Scholar
• Lesage J., Chicot D., Nosei L. and Feugeas J.: ‘Prediction of hardness–depth profile from indentations at surface of materials’, Surf. Eng., 2009, 25, 93–96.
   Web of Science ®Google Scholar
• Beake B., Bell G. A., Goodes S. R., Pickford N. J. and Smith J. F.: ‘Improved nanomechanical test techniques for surface engineered materials’, Surf. Eng., 2010, 26, 37–49.
   Web of Science ®Google Scholar
• Barquete D. M., Corat E. J., Campos R. A., Moura Neto C. and Trava-Airoldi V. J.: ‘Thermodiffused vanadium carbide interface for diamond films on steel and cemented carbides substrates’, Surf. Eng., 2010, 26, 506–510.
   Web of Science ®Google Scholar
• Budna K. P. and Mitterer C.: ‘Synthesis and characterisation of sputtered hard coatings within the system Cr–N/WSX’, Surf. Eng., 2010, 26, 602–606.
   Web of Science ®Google Scholar
• Kuppusami P., Elangovan T., Murugesan S., Thirumurugesan R., Khan S., George R. P., Ramaseshan R., Divakar R., Mohandas E. and Mangalaraj D.: ‘Microstructural, nanomechanical and antibacterial properties of magnetron sputtered nanocomposite thin films of CrN/Cu’, Surf. Eng., 2012, 28, 134–140.
   Web of Science ®Google Scholar
• Lesage J., Pertuz A., Puchi-Cabrera E. S. and Chicot D.: ‘A model to determine the surface hardness of thin films from standard micro-indentation tests’, Thin Solid Films, 2006, 497, 232–238.
   Web of Science ®Google Scholar
• Puchi-Cabrera E. S., Berrıos J. A. and Teer D. G.: ‘On the computation of the absolute hardness of thin solid films’, Surf. Coat. Technol., 2002, 157, 185–196.
   Web of Science ®Google Scholar
• Marshall D. B., Noma T. and Evans A. G.: ‘A simple method for determining elastic-modulus-to-hardness ratios using Knoop indentation technique’, J. Am. Ceram. Soc., 1982, 65, 175–176.
   Web of Science ®Google Scholar
• Loubet J. L., Georges J. M. and Meille G.: ‘Vickers Indentation curves ot elastoplastic materials’ in ‘Microindentation techniques in materials science and engineering’, (ed. Blau P. J. and Lawn B. R..), ASTM-STP 889, 72–79; 1986, Philadelphia, PA, American Society for Testing and Materials.
   Google Scholar
• Sneddon I. N.: ‘The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile’, Int. J. Eng. Sci., 1965, 3, 47–57.
   Google Scholar
• Zhang J. and Sakai M.: ‘Geometrical effect of pyramidal indenters on the elastoplastic contact behaviors of ceramics and metals’, Mater. Sci. Eng. A, 2004, A381, 62–70.
   Google Scholar
• Mathia T. G., Pawlus P. and Wieczorowski M.: ‘Recent trends in surface metrology’, Wear, 2011, 271, 494–508.
   Web of Science ®Google Scholar
• Rouxel T., Sanglebœuf J. C., Moysan C. and Truffin B.: ‘Indentation topometry in glasses by atomic force microscopy’, J. Non-Cryst. Solids, 2004, 344, 26–36.
   Web of Science ®Google Scholar
• Leonard R. L., Hasan S. A., Terekhov A. Y., Thompson C., Erck R. A., Dickerson J. H. and Johnson J. A.: ‘Protective coatings for enhanced performance in biomedical applications’, Surf. Eng., 2012, 28, 473–479.
   Web of Science ®Google Scholar
• Nagy P., Juhasz A. and Kalman E.: ‘AFM investigation on Vickers indents: an artefact?’, Mikrochim. Acta, 2000, 132, 457–460.
   Google Scholar
• Chowdhury S. and Laugier M. T.: ‘The use of non-contact AFM with nanoindentation techniques for measuring mechanical properties of carbon nitride thin films’, Appl. Surf. Sci., 2004, 233, 219–226.
   Web of Science ®Google Scholar
• Sirena M., Fusil S., Bouzehouane K., George J. M. and Cros V.: ‘Study of atomic force microscopy nanoindentation for the development of nanostructures’, Physica B, 2009, 132B, 457–460.
   Google Scholar
• Zhu Y., Dong Z., Wejinya U. C., Jin S. and Ye K.: ‘Determination of mechanical properties of soft tissue scaffolds by atomic force microscopy nanoindentation’, J. Biomechanics, 2011, 44, 2356–2361.
   PubMed Web of Science ®Google Scholar
• Ferencz R., Sanchez J., Blumich B. and Herrmann W.: ‘AFM nanoindentation to determine Young’s modulus for different EPDM elastomers’, Polym. Test., 2012, 31, 425–432.
   Web of Science ®Google Scholar
• Kocourek T., Ruzek M., Landa M., Jelinek M., Miksovsky J. and Kopecek J.: ‘Evaluation of elastic properties of DLC layers using resonant ultrasound spectroscopy and AFM nanoindentation’, Surf. Coat. Technol., 2011, 205, S67–S70.
   Web of Science ®Google Scholar
• Jee A. Y. and Lee M.: ‘Comparative analysis on the nanoindentation of polymers using atomic force microscopy’, Polym. Test., 2010, 29, 95–99.
   Web of Science ®Google Scholar
• Bemporad E., Sebastiani M., Pecchio C. and De Rossi S.: ‘High thickness Ti/TiN multilayer thin coatings for wear resistant applications’, Surf. Coat. Technol., 2006, 201, 2155–2165.
   Web of Science ®Google Scholar
• CES, The Cambridge Engineering Selector, Granta Design, Rustat House, 62 Clifton Road, Cambridge CB1 7EG, UK. http://www.grantadesign.com (accessed 14 May 2013).
   Google Scholar
• Bull S. J.: ‘Nanoindentation of coatings’, J. Phys. D, 2005, 38D, R393–R413.
   Google Scholar
• Bolshakov A., Oliver W. C. and Pharr G. M.: ‘Influences of stress on the measurement of mechanical properties using nanoindentation. 2: finite element simulation’, J. Mater. Res., 1996, 11, 760–768.
   Web of Science ®Google Scholar
• Suresh S. and Giannakopoulos A. E.: ‘A new method for estimating residual stresses by instrumented sharp indentation’, Acta Mater., 1998, 46, 5755–5767.
   Web of Science ®Google Scholar
• Sebastiani M., Bemporad E., Carassiti F. and Schwarzer N.: ‘Residual stress measurement at the micrometer scale: focused ion beam (FIB) milling and nanoindentation testing’, Philos. Mag., 2011, 91, 1121–1136.
   Web of Science ®Google Scholar
• Sebastiani M., Bemporad E. and Carassiti F.: ‘On the influence of residual stress on nano-mechanical characterization of thin coatings’, J. Nanosci. Nanotechnol., 2011,11, 1–9.
   PubMedGoogle Scholar