Effect of microblasting on cathodic arc evaporation CrN coatings

References

• Khameneh AS, Heydarzadeh SM: ‘Effect of grit-blasting parameters on the surface roughness and adhesion strength of sprayed coating’, Surf. Interface Anal., 2010, 42, 551–554.
   Web of Science ®Google Scholar
• Nikolaj G, Bretislav S, Kamil K, Zdenek P: ‘Residual stress depth profile in surface layers of shot-peened decarburised steels’, Proc. Conf. 50th Annual Conf. on ‘Experimental stress analysis’, Tabor, Czech Republic, June 2012, TechSoft Engn; Variel; VUKV; LABTECH; DUO; Zwick Roell; Safibra; HBP Merici Technika; Inova; Air Phoenix; Composite; CompoTech; IMECO TH; Skoda Power; Instron; Derutex; Nikon; NUX, 111–114.
   Google Scholar
• Scuracchio BG, de Lima NB, Schön CG: ‘Role of residual stresses induced by double peening on fatigue durability of automotive leaf springs’, Mater. Des., 2013, 47, 672–676.
   Web of Science ®Google Scholar
• Yamauchi N, Demizu K, Ueda N, Sone T, Tsujikawa M, Hirose Y: ‘Effect of peening as pretreatment for DLC coatings on magnesium alloy’, Thin Solid Films, 2006, 506, 378–383.
   Web of Science ®Google Scholar
• Toenshoff HK, Karpuschewski B, Mohlfeld A, Seegers H: ‘Influence of stress distribution on adhesion strength of sputtered hard coatings’, Thin Solid Films, 1998, 332, 146–150.
   Web of Science ®Google Scholar
• Bouzakis K.-D, Michailidis N, Hadjiyiannis S, Efstathiou K, Pavlidou E, Erkens G, Rambadt S, Wirth I: ‘Improvement of PVD coated inserts cutting performance, through appropriate mechanical treatments of substrate and coating surface’, Surf. Coat. Technol., 2001, 146, 443–450.
   Web of Science ®Google Scholar
• Klocke F, Schroeder T, Bouzakis E, Klein A: ‘Manipulation of coating and subsurface properties in reconditioning of WC–Co carbide cutting tools’, Surf. Coat. Technol., 2007, 202, 1194–1198.
   Web of Science ®Google Scholar
• Bouzakis K.-D, Skordaris G, Klocke F, Bouzakis E: ‘A FEM-based analytical–experimental method for determining strength properties gradation in coatings after micro-blasting’, Surf. Coat. Technol., 2009, 203, 2946–2953.
   Web of Science ®Google Scholar
• Bouzakis K.-D, Michailidis N, Skordaris G, Bouzakis E, Biermann D, M’Saoubi R: ‘Cutting with coated tools: coating technologies, characterization methods and performance optimization’, Proc. Conf. 62nd General Assembly of CIRP, Hong Kong, China, August 2012, Vol. 61, 703–723.
   Google Scholar
• Bouzakis K.-D, Bouzakis E, Skordaris G, Makrimallakis S, Tsouknidas A, Katirtzoglou G, Gerardism S: ‘Effect of PVD films wet micro-blasting by various Al2O3 grain sizes on the wear behaviour of coated tools’, Surf. Coat. Technol., 2011, 205, S128–S132.
   Web of Science ®Google Scholar
• Bouzakis K.-D, Klocke F, Skordaris G, Bouzakis E, Gerardis S, Katirtzoglou G, Makrimallakis S: ‘Influence of dry micro-blasting grain quality on wear behaviour of TiAlN coated tools’, Wear, 2011, 271, 783–791.
   Web of Science ®Google Scholar
• Barbatti C, Garcia J, Pitonak R, Pinto H, Kostka A, Di Prinzio A, Staia MH, Pyzalla AR: ‘Influence of micro-blasting on the microstructure and residual stresses of CVD kappa-Al2O3 coatings’, Surf. Coat. Technol., 2009, 203, 3708–3717.
   Web of Science ®Google Scholar
• Gelfi M, Bontempi E, Roberti R, Depero LE: ‘X-ray diffraction Debye Ring Analysis for STress measurement (DRAST): a new method to evaluate residual stresses’, Acta Mater., 2004, 52, 583–589.
   Web of Science ®Google Scholar
• Cullity BD, Stock SR: ‘Elements of X-ray diffraction’, 3rd edn; 2001, Upper Saddle River, NJ, Prentice Hall.
   Google Scholar
• Oden M, Ericsson C, Hakasson G, Ljungcrantz H: ‘Microstructure and mechanical behaviour of arc-evaporated Cr–N coatings’, Surf. Coat. Technol., 1999, 114, 39–51.
   Web of Science ®Google Scholar
• Sebastiani M, Piccoli M, Bemporad E: ‘Effect of micro-droplets on the local residual stress field in CAE-PVD thin coatings’, Surf. Coat. Technol., 2013, 215, 407–412.
   Web of Science ®Google Scholar
• Attar F, Johannesson T: ‘Adhesion and X-ray elastic constant evaluation of CrN coating’, Thin Solid Films, 258–, 1995.
   Google Scholar
• Bouzakis KD, Skordaris G, Bouzakis E: ‘Method for determining coating’s strength changes after inducing plastic or elastic residual stresses’, Proc. Eng., 2011, 19, 34–39.
   Google Scholar
• Gelfi M, La Vecchia GM, Lecis N, Troglio S: ‘Relationship between through-thickness residual stress of CrN-PVD coatings and fatigue nucleation sites’, Surf. Coat. Technol., 2005, 192, 263–268.
   Web of Science ®Google Scholar
• Baragetti S, Gelfi M, La Vecchia GM, Lecis N: ‘Fatigue resistance of CrN thin films deposited by arc evaporation process on H11 tool steel and 2205 duplex stainless steel’, Fatigue Fract. Eng. Mater. Struct., 2005, 28, 615–21.
   Web of Science ®Google Scholar