Experimental and SPH study of cold spray impact between similar and dissimilar metals

References

• Papyrin A., Kosarev V., Klinkov S., Alkhimov A. and Fomin V.: ‘High velocity interaction of particles with the substrate. Experiment and modeling’, in ‘Cold Spray Technology’, 1st edn, Chap. 2, 33–108; 2007, Amsterdam, Elsevier Science.
   Google Scholar
• Gartner F.: ‘Advances in cold spraying’, Surf. Eng., 2006, 22, 161–163.
   Web of Science ®Google Scholar
• Villafuerte J.: ‘Recent trends in cold spray technology: looking at the future’, Surf. Eng., 2010, 26, 393–394.
   Web of Science ®Google Scholar
• Nooirinah O., Rohana A., Nazrul H. N. and Suhana M.: Supersonic particle deposition as potential corrosion treatment method for helicopter part in Malaysia’, Int. J. Adv. Res. Eng. Technol., 2012, 3, 275–279.
   Google Scholar
• Zhu Q. J., Wang K., Wang X. H. and Hou B. R.: ‘Electrochemical impedance spectroscopy analysis of cold sprayed and arc sprayed aluminium coatings serviced in marine environment’, Surf. Eng., 2012, 28, 300–305.
   Web of Science ®Google Scholar
• Lee J. C., Kang H. J., Chu W. S. and Ahn S. H.: ‘Repair of damaged mold surface by cold spray method’, CIRP. Ann-Manuf. Technol., 2007, 56, 577–580.
   Web of Science ®Google Scholar
• Richer P., Yandouz M., Beauvais L. and Jodoin B.: ‘Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF, and cold dynamic spraying’, Surf. Coat. Technol., 2010, 204, 3962–3974.
   Web of Science ®Google Scholar
• Kumar M., Singh H. and Singh N.: ‘Synthesis and deposition of Ni-20Cr powder using cold spraying’, Surf. Eng., 2013, 29, 419–426.
   Web of Science ®Google Scholar
• Lee H. and Ko K.: ‘Effect of SiC particle on cold sprayed Al–SiC composite coatings’, Surf. Eng., 2009, 25, 601–611.
   Google Scholar
• Lee H. and Ko K.: ‘Fabrication of porous Al alloy coatings by cold gas dynamics spray process’, Surf. Eng., 2010, 26, 395–398.
   Web of Science ®Google Scholar
• Assadi H., Gartner F., Stoltenhoff T. and Kreye H.: ‘Bonding mechanism in cold spraying’, Acta Mater., 2003, 51, 4379–4394.
   Web of Science ®Google Scholar
• Bae G., Xiong Y., Kumar S., Kang K. and Lee C.: ‘General aspects of interface bonding in kinetic sprayed coatings’, Acta Mater., 2008, 56, 4858–4868.
   Web of Science ®Google Scholar
• King P. C., Bae G., Zahiri S. H., Jahedi M. and Lee C.: ‘An experimental and finite element study of cold spray copper impact onto two aluminum substrates’, J. Thermal Spray Technol., 2010, 19, 620–634.
   Web of Science ®Google Scholar
• Schmidt T., Gartner F., Stoltenhoff H., Assadi H. and Kreye H.: ‘Development of a generalized parameter window for cold spray deposition’, Acta Mater., 2006, 54, 729–742.
   Web of Science ®Google Scholar
• Wu J., Fang H. Y., Yoon S. H., Kim H. J. and Lee C.: ‘The rebound phenomenon in kinetic spraying deposition’, Scr. Mater., 2006, 54, 665–669.
   Web of Science ®Google Scholar
• Zhou X., Wu X., Wang J. and Zhang J.: ‘Numerical investigation of the rebounding and the deposition behaviour of particles during cold spraying’, Acta Metall. Sin. (Engl. Lett.), 2011, 24, 1–11.
   Google Scholar
• Li W.-Y. and Gao W.: ‘Some aspects on 3D modeling of high velocity impact of particles in cold spraying by explicit finite element analysis’, Appl. Surf. Sci., 2009, 255, 7878–7892.
   Web of Science ®Google Scholar
• Li W.-Y., Shuo Y. and Wang X. F.: Numerical investigations of the effect of oblique impact on particle deformation in cold spraying by the SPH method’, Appl. Surf. Sci., 2010, 256, 3725–3734.
   Web of Science ®Google Scholar
• Yin S., Wang X.-F., Xu B.-P. and Li W.-Y.: ‘Examination of the calculation method for modeling the multi-particle impact process in cold spraying’, J. Therm. Spray Technol., 2010, 19, (5), 1032–1041.
   Web of Science ®Google Scholar
• Chun D.-M. and Ahn S.-H.: ‘Deposition mechanism of dry sprayed ceramic particles at room temperature using nano-particle deposition system’, Acta Mater., 2011, 59, 2693–2270.
   Web of Science ®Google Scholar
• Manap A., Okabe T. and Ogawa K.: ‘Computer simulation of cold sprayed deposition using smoothed particle hydrodynamics’, Procedia Eng., 2011, 10, 1145–1150.
   Google Scholar
• Manap A. and Ogawa K.: ‘Numerical analysis of interfacial bonding of aluminum powder particle and aluminum substrate by cold spray technique using the SPH method’, Proc. JSME/ASME 2011 Int. Conf. on ‘Materials and processing’, Corvallis, OR, USA, June 2011, American Society of Mechanical Engineers.
   Google Scholar
• Manap A., Ogawa K. and Okabe T.: ‘Numerical analysis of interfacial bonding of Al–Si particle and mild steel substrate by cold spray technique using the SPH method’, J. Sol. Mech. Mater. Eng., 2012, 6, 241–250.
   Google Scholar
• Lin Y. Y., Hui C. Y. and Jagota A.: ‘The role of viscoelastic adhesive contacts in the sintering of polymeric particles’, J. Colloid Interface Sci., 2001, 237, 267–282.
   PubMed Web of Science ®Google Scholar
• Johnson G. R. and Cook W. H.: ‘Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures’, Eng. Fract. Mech., 1985, 21, 31–48.
   Web of Science ®Google Scholar
• Wang Y., Beom H. G., Sun M. and Lin S.: ‘Numerical simulation of explosive welding using the material point method’, Int. J. Impact Eng., 2011, 38, 51–60.
   Web of Science ®Google Scholar
• Lee J., Shin S., Kim H. J. and Lee C.: ‘Effect of gas temperature on critical velocity and deposition characteristics in kinetic spraying’, Appl. Surf. Sci., 2007, 253, 3512–3520.
   Web of Science ®Google Scholar
• Klinkov S. V., Kosarev V. F. and Rein M.: ‘Cold spray deposition: significance of particle impact phenomena’, Aerosp. Sci. Technol., 2005, 9, 582–591.
   Web of Science ®Google Scholar