References
- Meneve J, Vercammen K, Dekempeneer E and Smeets J: ‘Thin tribological coatings: magic or design’, Surf. Coat. Technol., 1997, 94–95, 476–482.
- Nordin M, Larsson M and Hogmark S: ‘Mechanical and tribological properties of multilayered PVD TiN/CrN’, Wear, 1999, 232, 221–225.
- Sproul WD: ‘Reactive sputter deposition of polycrystalline nitride and oxide superlattice coatings’, Surf. Coat. Technol., 1996, 86–87, 170–176.
- Yogesha S, Udupa KR and Hegde AC: ‘Surface modification by multilayered Zn–Co alloy coatings’, Surf. Eng., 2012, 28, (1), 49–56.
- An T, Wen M, Hu CQ, Tian HW and Zheng WT: ‘Interfacial fracture for TiN/SiNx nano-multilayer coatings on Si(1 1 1) characterized by nanoindentation experiments’, Mater. Sci. Eng. A, A494, 2008, 324–328.
- Kosinskiy M, Ahmed SI, Liu Y, Gubisch M, Mastylo R, Spiess L and Schaefer JA: ‘Friction and wear properties of WC/C nano-scale multilayer coatings on technical surfaces’, Tribiol. Lett., 2011, 44, (1), 89–98.
- Panagopoulos CN, Georgiou EP, Tsoutsouva MG and Krompa M: ‘Composite multilayered coatings on mild steel’, Tribiol. Lett., 2011, 8, (1), 125–133.
- Carradò A, Schmerber G and Pelletier H: ‘Structural and mechanical investigations of magnetron sputtering TiO2/Ti/TiN multilayer films on Si(100) substrate’, Tribiol. Lett., 2010, 7, (6), 821–829.
- Paulitsch J, Maringer C and Mayrhofer PH: ‘Low friction CrNMPP/TiNDCMS multilayer coatings’, Tribiol. Lett., 2012, 46, (1), 87–93.
- Cao JL, Choy KL, Sun HL, Li HQ, Teer D and Bao MD: ‘Syntheses of nano-multilayered TiN/TiSiN and CrN/CrSiN hard coatings’, J. Coat. Technol. Res., 2011, 8, (2), 283–288.
- Zhao X, Xie Z and Munro P: ‘Nanoindentation of hard multilayer coatings: finite element modelling’, Mater. Sci. Eng. A, 2011, A528, 1111–1116.
- Chen L, Wanga SQ, Dua Y and Li J: ‘Microstructure and mechanical properties of gradient Ti(C, N) and TiN/Ti(C, N) multilayer PVD coatings’, Mater. Sci. Eng. A, 2008, A478, 336–339.
- Altuncu E and Üstel F: ‘Correlation between sputtering conditions and growth properties of (TiAl)N/AlN multilayer coatings’, Mater. Manuf. Proccesses, 2009, 24, (7–8), 794–795.
- Luo Q: ‘Origin of friction in running-in sliding wear of nitride coatings’, Tribiol. Lett., 2010, 37, (3), 529–539.
- Toth L (ed.): ‘Transition metal carbides and nitrides’; 1971, New York, Academic Press.
- Bull SJ and Jones AM: ‘Multilayer coatings for improved performance’, Surf. Coat. Technol., 1996, 78, 173–184.
- Zheng L and Ramalingam S: ‘Multi-layer and composite structures for advanced coatings’, Surf. Coat. Technol., 1996, 81, 52–71.
- Scheerer H, Hoche H, Broszeit E and Berger C: ‘Tribological properties of sputtered CrN coatings under dry sliding oscillation motion at elevated temperatures’, Surf. Coat. Technol., 2001, 142–144, 1017–1022.
- Bowden FP and Tabor D (eds.): ‘Friction and lubrication of solids’, Part I; 1950, Oxford, Oxford University Press.
- Park BL: ‘Characteristics of PECVD grown tungsten nitride films as diffusion barrier layers for ULSI DRAM applications’, J. Electron. Mater., 1997, 26, L1–L5.
- Uekubo M, Oku T, Nii K, Murakami M, Takahiro K, Yamaguchi S, Nakano T and Ohta T: ‘WNx diffusion barriers between Si and Cu’, Thin Solid Films, 1996, 286, 170–175.
- Polcar T, Parreira NMG and Cavaleiro A: ‘Structural and tribological characterization of tungsten nitride coatings at elevated temperature’, Wear, 2008, 265, 319–326.
- Polcar T, Parreira NMG and Cavaleiro A: ‘Tribological characterization of tungsten nitride coatings deposited by reactive magnetron sputtering’, Wear, 2007, 262, 655–665.
- Yu CY, Wang SB, Li TB and Zhang ZX: ‘Tribological behaviour of CrAlN coatings at 600°C’, Surf. Eng., 2013, 29, (3), 318–321.
- Tański T and Lukaszkowicz K: ‘Structure and properties of PVD coatings deposited on aluminium alloys’, Surf. Eng., 2012, 28, (8), 598–604.
- Singh VP, Sil A and Jayaganthan R: ‘Tribological behaviour of nanostructured Al2O3 coatings’, Surf. Eng., 2012, 28, (4), 277–284.
- Kek Merl D, Panjan P and Milošev I: ‘Effect of tungsten content on properties of PVD sputtered Al–WX alloys’, Surf. Eng., 2013, 29, (3), 281–286.
- Yamamoto T, Kawate M, Hasegawa H and Suzuki T: ‘Effects of nitrogen concentration on microstructures of WNX films synthesized by cathodic arc method’, Surf. Coat. Technol., 2005, 193, 372–374.
- Shen YG, Mai YW, Zhang QC, McKenzie DR, McFall WD and McBride WE: ‘Residual stress, microstructure, and structure of tungsten thin films deposited by magnetron sputtering’, J. Appl. Phys., 2000, 87, 177–187.
- Boukhris L and Poitevin JM: ‘Electrical resistivity, structure and composition of D.C. sputtered WNx films’, Thin Solid Films, 1997, 310, 222–227.
- Guruvenket S and Rao GM: ‘Bias induced structural changes in tungsten nitride films deposited by unbalanced magnetron sputtering’, Mater. Sci. Eng. B, 2004, B106, 172–176.
- Fang ZH, Hu M, Zhang W, Zhang XR and Yang HB: ‘Mechanical properties of porous silicon by depth-sensing nanoindentation techniques’, Thin Solid Films, 2009, 517, 2930–2935.
- Şahin O, Uzun O, Kölemen U and Uçar N: ‘Mechanical characterization for β-Sn single crystals using nanoindentation tests’, Mater. Charact., 2008, 59, 427–434.
- Carvalho NJM and de Hosson JThM: ‘Deformation mechanisms in TiN/(Ti,Al)N multilayers under depth-sensing indentation’, Acta Mater., 2006, 54, (7), 1857–1862.
- Carvalho NJM and de Hosson JTM: ‘Nanoindentation study of PVD WC/C coatings supported by cross-sectional electron microscopy observations’, Surf. Eng., 2001, 17, (2), 105–111.
- Pharr GM, Oliver WC and Brotzen FR: ‘On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation’, J. Mater. Res., 1992, 7, 613.
- Holmberg K and Matthews A (eds.): ‘Coating tribology: properties, techniques and applications in surface engineering’; 1994, Amsterdam, Elsevier.
- Kıvak T, Samtas G and Cicek A: ‘Taguchi method based optimisation of drilling parameters in drilling of AISI 316 steel with PVD monolayer and multilayer coated HSS drills’, Measurement, 2012, 45, 1547–1557.
- Braic V, Zoit CN, Balaceanu M, Kiss A, Vladescu A, Popescu A and Brai M: ‘TiAlN/TiAlZrN multilayered hard coatings for enhanced performance of HSS drilling tools’, Surf. Coat. Technol., 2010, 204, 1925–1928.
- Upadhyay RK and Kumaraswamidhas LA: Unpublished work, 2014.
- Chen CQ, Pei YT, Shaha KP and de Hosson JThM: ‘Tunable self-organization of nanocomposite multilayers’, Appl. Phys. Lett., 2010, 96, (7), 073103.
- Carvalho NJM and de Hosson JTM: ‘Characterization of mechanical properties of tungsten carbide/carbon multilayers: cross-sectional electron microscopy and nanoindentation observations’, J. Mater. Res., 2001, 16, (8), 2213–2222.
- Strondl C, Carvalho NM, de Hosson JThM and Krug TG: ‘Influence of energetic ion bombardment on W–C:H coatings deposited with W and WC targets’, Surf. Coat. Technol., 2005, 200, (1–4), 1142–1146.
- Strondl C, Carvalho NM, de Hosson JThM and van der Kolk GJ: ‘Investigation on the formation of tungsten carbide in tungsten-containing diamond like carbon coatings’, Surf. Coat. Technol., 2003, 162, (2–3), 288–293.
- Carvalho NJM and de Hosson JTM: ‘Microstructure investigation of magnetron sputtered WC/C coatings deposited on steel substrates’, Thin Solid Films, 2001, 388, (1–2), 150–159.
- Upadhyay RK and Kumaraswamidhas LA: ‘Tungsten/tungsten nitride performance at elevated temperature’, Mater. High Temp., 2014, DOI. 10.11794/1878641314Y.000000003.
- Mohamed SH: ‘Thermal, thermal stability of tungsten nitride films deposited by reactive magnetron sputtering’, Surf. Coat. Technol., 2008, 202, 2169–2175.
- Ramalingam S, and Zheng L: ‘Film–substrate interface stresses and their role in the tribological performance of surface coatings’, Tribiol. Int., 1995, 28, 145–161.
- Mao K, Sun Y, Bloyce A and Bell T: ‘Surface coating effects on contact stress and wear: an approach of surface engineering design and modelling’, Surf. Eng., 2010, 26, (1–2), 142–148.
- Holleck H and Schier V: ‘Multilayer PVD coatings for wear protection’, Surf. Coat. Technol., 1995, 76–77, 328–336.