Protection of Cu components with Mg and Al coatings deposited by pack cementation

References

• Sozer EB, Jiang C, Gundersen MA and Umstattd RJ: ‘Quantum efficiency measurements of photocathode candidates for back-lighted thyratrons’, IEEE Trans. Dielectr. Electr. Insul., 2009, 16, (4), 993–998.
   Web of Science ®Google Scholar
• Kim KH, Norton DP, Christen DK and Budai JD: ‘Formation of oxidation-resistant Cu–Mg coatings on (001) Cu for oxide superconducting tapes’, Surf. Coat. Technol., 2008, 202, 5136–5139.
   Web of Science ®Google Scholar
• A Schweitzer P: ‘Fundamentals of metallic corrosion: atmospheric and media corrosion of metals’, 2nd edn; 2007, Boca Raton, FL, CRC Press.
   Google Scholar
• Chaliampalias D, Papazoglou M, Tsipas S, Pavlidou E, Skolianos S, Stergioudis G and Vourlias G: ‘Fabrication and examination of oxidation resistance of zinc coated copper and brass components by chemical deposition’, Surf. Eng., 2011, 27, (5), 362–367.
   Web of Science ®Google Scholar
• Rahman A, Jayaganthan R, Prakash S, Chawla V and Chandra R: ‘Cyclic high temperature oxidation behaviour of sputtered Cr/Al multilayer coatings on superalloy’, Surf. Eng., 2011, 27, (5), 393–401.
   Web of Science ®Google Scholar
• Liu GJ, Jia SS, Hong SH, Lim JW, Zhu YF, Mimura K and Isshiki M: ‘Corrosion resistance of dilute CuMg alloys at elevated temperature’, Corros. Sci., 2009, 51, (3), 463–468.
   Web of Science ®Google Scholar
• Arcot B, Murarka SP, Clevenger LA, Hong QZ and Ziegler W: ‘Intermetallic formation in copper/magnesium thin films – kinetics, nucleation and growth, and effect of interfacial oxygen’, J. Appl. Phys., 1994, 76, 5161.
   Web of Science ®Google Scholar
• Chaliampalias D, Andronis S, Stergioudis G, Tsipas D, Vourlias G and Pavlidou E: ‘Deposition of multilayer NiCrBSiFe and Al coatings on low carbon steels’, Microscopy Cong., Kiel, Germany, August–September 2011, Proc., (Copyright) 2011 DGE – German Society for Electron Microscopy e.V. Germany, MC2011.
   Google Scholar
• Felipe TS, Murarka SP, Bedell S and Landford WA: ‘Capacitance–voltage, current–voltage, and thermal stability of copper alloyed with aluminium or magnesium’, Thin Solid Films, 1998, 35, 49–53.
   Web of Science ®Google Scholar
• Frederick MJ and Ramanath GJ: ‘Kinetics of interfacial reaction in Cu–Mg alloy films on SiO2’, Appl. Phys., 2004, 95, 363–366.
   Web of Science ®Google Scholar
• Stathokostopoulos D, Chaliampalias D, Stefanaki EC, Polymeris G, Pavlidou E, Chrissafis K, Hatzikraniotis E, Paraskevopoulos KM and Vourlias G: ‘Structure, morphology and electrical properties of Mg2Si layers deposited by pack cementation’ Appl. Surf. Sci., 2013, 285, 417–424.
   Web of Science ®Google Scholar
• Stathokostopoulos D, Chaliampalias D, Pavlidou E, Hatzikraniotis E, Stergioudis G, Paraskevopoulos KM and Vourlias G: ‘Formation of Mg2Si thick films on Si substrates using pack cementation process’, AIP Conf. Proc., 2012, 1449, 203–206.
   Google Scholar
• Vourlias G, Chaliampalias D, Pavlidou E, Stergioudis G and Chrissafis K: ‘Examination of zinc coatings on copper substrates by thermal analysis’, J. Therm. Anal. Calorim., 2013, 111, 49–55.
   Web of Science ®Google Scholar
• Hu G, Xu Z, Liu J and Li Y: ‘Microstructure and corrosion resistance of simultaneous Al–Fe coating on copper by pack cementation’, Surf. Coat. Technol., 2009, 203, 3392–3397.
   Web of Science ®Google Scholar
• Eslami A, Arabi H and Rastegari S: ‘Gas phase aluminizing of a nickel base superalloy by a single step HTHA aluminizing process’, Can. Metall. Q., 2009, 48, (1), 91–98.
   Web of Science ®Google Scholar
• Xiang ZD and Datta PK: ‘Relationship between pack chemistry and aluminide coating formation for low-temperature aluminisation of alloy steels’, Acta Mater., 2006, 54, 4453–4463.
   Web of Science ®Google Scholar
• Schmidt D, Galetz M and Schutze M: ‘Deposition of manganese and cobalt on ferritic–martensitic steels via pack cementation process’ Oxid. Met., 2013, 79, 589–599.
   Web of Science ®Google Scholar
• Vourlias G, Pistofidis N, Chrissafis K, Pavlidou E and Stergioudis G: ‘Mechanism and kinetics of the formation of zinc pack coatings’, J. Therm. Anal. Calorim., 2008, 91, 497–501.
   Web of Science ®Google Scholar
• Zhou F, Gao M, Tu GF, Liu K and Pengu KW: ‘Aluminide coating prepared on Ni-base superalloy by pack cementation’, Adv. Mater. Res., 2014, 848, 11–17.
   Google Scholar
• Sakidja R, Perepezko JH and Calhoun P: ‘Synthesis, thermodynamic stability and diffusion mechanism of Al5Fe2-based coatings’, Oxid. Met., 2014, 81, 167–177.
   Web of Science ®Google Scholar
• Wang J, Wu DJ, Zhu CY and Xiang ZD: ‘Low temperature pack aluminising kinetics of nickel electroplated on creep resistant ferritic steel’, Surf. Coat. Technol., 2013, 236, 135–141.
   Web of Science ®Google Scholar
• Chiang KT, Kallenborn KJ and Yuen JL: ‘Aluminization of copper for oxidation protection’, Surf. Coat. Technol., 1992, 52, 135–139.
   Web of Science ®Google Scholar
• Abd El-Azim ME and Soliman HM: ‘Pack aluminizing of copper’, J. Mater. Sci. Technol., 1997, 13, 127–132.
   Web of Science ®Google Scholar
• ‘PC powder diffraction files’, JCPDS-ICDD, 2003.
   Google Scholar
• Okamoto H: ‘Alloy phase diagram’, Vol. 3, 747–748; 1992, Materials Park, OH, ASM International.
   Google Scholar
• Nordlien JH, Ono S, Masuko N and Nisancioglu K: ‘A TEM investigation of naturally formed oxide films on pure magnesium’, Corros. Sci., 1997, 39, (8), 1397–1414.
   Web of Science ®Google Scholar
• Eliezer D and Alves H (eds.): ‘Corrosion and oxidation of magnesium alloys’, 267–291; 2002, New York, John Wiley & Sons.
   Google Scholar
• Zhu F, Lu HM, Jiang Q, Mimura K and Isshiki M: ‘Effect of alloying Mg on corrosion resistance of Cu at high temperature’, J. Electrochem. Soc., 2007, 3, 153–158.
   Web of Science ®Google Scholar