Investigation of monolayer–multilayer PVD nitride coating

References

• Kathrein M, Michotte C, Penoy M Polcik P and Mitterer C: ‘Multifunctional multi-component PVD coatings for cutting tools’, Surf. Coat. Technol., 2005, 200, 1867–1871.
   Web of Science ®Google Scholar
• Dey SP and Deevi SC: ‘Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review’, Mater. Sci. Eng. A, 2003, A342, 58–79.
   Google Scholar
• Kothari DC and Kale AN: ‘Recent trends in surface engineering using cathodic arc technique’, Surf. Coat. Technol., 2002, 158–159, 174–179.
   Web of Science ®Google Scholar
• Kulkarni AP, Joshi GG and Sargade VG: ‘Performance of PVD AlTiCrN coating during machining of austenitic stainless steel’, Surf. Eng., 2013, 29, (5), 402–407.
   Web of Science ®Google Scholar
• McIntyre D, Greene JE, Håkansson G, Sundgren JE and Münz WD: ‘Oxidation of metastable single-phase polycrystalline Ti0·5Al0·5N films: kinetics and mechanisms’, J. Appl. Phys., 1990, 67, 1542–1543.
   Web of Science ®Google Scholar
• Smith IJ, Münz WD, Donohue LA, Petrov I and Greene JE: ‘Improved Ti1–xAlxN PVD coatings for dry high speed cutting operations’, Surf. Eng., 1998, 14, (1), 37–42.
   Google Scholar
• Harris SG, Doyle ED, Vlasveld AC and J Dolder P: ‘Dry cutting performance of partially filtered arc deposited titanium aluminium nitride coatings with various metal nitride base coatings’, Surf. Coat. Technol., 2001, 146–147, 305–311.
   Web of Science ®Google Scholar
• Helmersson U, Todorova S, Barnett SA, Sundgren JE, Markert LC and Greene JE: ‘Growth of single-crystal TiN/VN strained-layer superlattices with extremely high mechanical hardness’, J. Appl. Phys., 1987, 62, 481–484.
   Web of Science ®Google Scholar
• Yashar PC and Sproul WD: ‘Nanometer scale multilayered hard coatings’, Vacuum, 1999, 55, 179–190.
   Web of Science ®Google Scholar
• Basu A, Majumdar JD and Manna I: ‘Structure and properties of CrxN coating’, Surf. Eng., 2012, 28, (3), 199–204.
   Web of Science ®Google Scholar
• Khlifi K, Ben C and Larbi A: ‘Investigation of adhesion of PVD coatings using various approaches’, Surf. Eng., 2013, 29, (7), 555–560.
   Web of Science ®Google Scholar
• Ji J, Niu Y, Wu J and Yu Z: ‘Improvement of properties of TiN coating by optimising microstructural design’, Surf. Eng., 2014, 30, (1), 36–40.
   Web of Science ®Google Scholar
• Desmaison J, Lefort P and Billy M: ‘Oxidation of titanium nitride in oxygen: Behavior of TiN0·83 and TiN0·79 plates’, Oxid. Met., 1979, 13, (3), 203–222.
   Web of Science ®Google Scholar
• Wahlström U, Hultman L, Sundgren JE, Adibi F, Petrov I and Greene JE: ‘Crystal growth and microstructure of polycrystalline Ti1−xAlxN alloy films deposited by ultra-high-vacuum dual-target magnetron sputtering’, Thin Solid Films, 1993, 235, 62–70.
   Web of Science ®Google Scholar
• Upadhyay RK and Kumaraswamidhas LA: ‘Surface modification by multilayered W/W2N coating’, Surf. Eng., 2014, 30, (7), 475–482.
   Web of Science ®Google Scholar
• Kıvak T, Samtaş G and Çiçek A: ‘Taguchi method based optimisation of drilling parameters in drilling of AISI 316 steel with PVD monolayer and multilayer coated HSS drills’, Measurement, 2012, 45, 1547–1557.
   Web of Science ®Google Scholar
• Braic V, Zoit CN, Balaceanu M Kiss A, Vladescu A, Popescu A and Braic M: ‘TiAlN/TiAlZrN multilayered hard coatings for enhanced performance of HSS drilling tools’, Surf. Coat. Technol., 2010, 204, 1925–1928.
   Web of Science ®Google Scholar
• Aubert A. Danroc J, Gauchcr A and Terrat JP: ‘Hard chrome and molybdenum coatings produced by physical vapour deposition’, Thin Solid Films, 1985, 126, 61–67.
   Web of Science ®Google Scholar
• Rudnik PJ, Graham ME and Sproul WD: ‘High rate reactive sputtering of MoNx coatings’, Surf. Coat. Technol., 1991, 49, 293–297.
   Web of Science ®Google Scholar
• Baba K and Hatada R: ‘Corrosion-resistant titanium nitride coatings formed on stainless steel by ion-beam-assisted deposition’, Surf. Coat. Technol., 1994, 66, 368–372.
   Web of Science ®Google Scholar
• Anitha VP, Bhattacharya A, Patil NitinG and Major S: ‘Study of sputtered molybdenum nitride as a diffusion barrier’, Thin Solid Films, 1993, 236, 306–310.
   Web of Science ®Google Scholar
• Kacsich T and Lieb KP: ‘Oxidation of thin CrN and Cr2N films analyzed via nuclear reaction analysis and Rutherford backscattering spectrometry’, Thin Solid Films, 1994, 245, 4–6.
   Web of Science ®Google Scholar
• Wilson A, Matthews A, Housden J, Turner R and Garside B: ‘A comparison of the wear and fatigue properties of plasma-assisted physical vapour deposition TiN, CrN and duplex coatings on Ti–6Al–4V’, Surf. Coat. Technol., 1993, 62, 600–607.
   Web of Science ®Google Scholar
• Hollek H: ‘Material selection for hard coatings’, J. Vac. Sci. Technol. A, 1986, 4A, (6), 2661–2669.
   Google Scholar
• Aubert A, Gillet R, Gaucher A and Terrat JP: ‘Hard chrome coatings deposited by physical vapour deposition’, Thin Solid Films, 1983, 108, 165–172.
   Web of Science ®Google Scholar
• Guruvenket S and Rao GM: ‘Bias induced structural changes in tungsten nitride films deposited by unbalanced magnetron sputtering’, Mater. Sci. Eng. B, 2004, B106, 172–176.
   Web of Science ®Google Scholar
• Tlili B, Nouveau C, Walock MJ, Nasri M and Ghrib T: ‘Effect of layer thickness on thermal properties of multilayer thin films produced by PVD’, Vacuum, 2012, 86, 1048–1056.
   Web of Science ®Google Scholar
• Bouzakis KD, Makrimallakis S, Katirtzoglou G, Skordaris G, Gerardis S, Bouzakis E, Leyendecker T, Bolz S and Koelker W: ‘Adaption of graded Cr/CrN-interlayer thickness to cemented carbide substrates’ roughness for improving the adhesion of HPPMS PVD films and the cutting performance’, Surf. Coat. Technol., 2010, 205, 1564–1570.
   Web of Science ®Google Scholar
• Joseph MC, Tsotsos C, Baker MA, Kench PJ, Rebholz C, Matthews A and Leyland A: ‘Characterisation and tribological evaluation of nitrogen-containing molybdenum–copper PVD metallic nanocomposite films’, Surf. Coat. Technol., 2005, 190, 345–356.
   Web of Science ®Google Scholar
• Zhao F, Song ZX, Zhang GF, Hou XD and Deng DW: ‘Effects of substrate bias on structure and mechanical properties of AlCrTiWNbTa coatings’, Surf. Eng., 2013, 29, (10), 778–782.
   Web of Science ®Google Scholar
• Pang J, Bai Y, Qin F, Pan L, Zhao Y and Kang R: ‘Deposition of Ti–Si–N films on Al substrates by magnetron sputtering’, Surf. Eng., 2013, 29, (10), 749–754.
   Web of Science ®Google Scholar
• Priyadarshini BG, Gupta MK, Ghosh S, Chakraborty M and Aich S: ‘Role of substrate bias during deposition of magnetron sputtered Ni, Ti and Ni–Ti thin films’, Surf. Eng., 2013, 29, (9), 689–694.
   Web of Science ®Google Scholar
• Kottfer D, Ferdinandy M, Kaczmarek L, Maňková I and Beňo J: ‘Investigation of Ti and Cr based PVD coatings deposited onto HSS Co 5 twist drills’, Appl. Surf. Sci., 2013, 282, 770–776.
   Web of Science ®Google Scholar
• Thaiwatthana S, Jantaping N and Limthongkul P: ‘Residual stress measurement of low temperature plasma surface alloyed layer using X-ray diffraction techniques’, Surf. Eng., 2012, 28, (4), 273–276.
   Web of Science ®Google Scholar
• Ghrib T, Tlili B, Nouveau C, Benlatreche Y, Lambertin M, Yacoubi N and Ennasri M: ‘Experimental investigation of the mechanical micro structural and thermal properties of thin CrAIN layers deposited by PVD technique for various aluminum percentages’, Phys. Proc., 2009, 2, 1327–1336.
   Google Scholar
• Shen YG, Mai YW, McKenzie DR, Zhang QC, McFall WD and McBride WE: ‘Composition, residual stress, and structural properties of thin tungsten nitride films deposited by reactive magnetron sputtering’, J. Appl. Phys., 2000, 88, 1380–1388.
   Web of Science ®Google Scholar
• Gassner G, Mayrhofer PH, Kutschej K, Mitterer C and Kathrein M: ‘Magnéli phase formation of PVD Mo–N and W–N coatings’, Surf. Coat. Technol., 2006, 201, 3335–3341.
   Web of Science ®Google Scholar
• Rybiak R, Fouvry S, Liskiewicz T and Wendler B: ‘Fretting wear of a TiN PVD coating under variable relative humidity conditions – development of a ‘composite’ wear law’, Surf. Coat. Technol., 2008, 202, 1753–1763.
   Web of Science ®Google Scholar
• Hsu CH, Lin CK, Huang KH and Ou KL: ‘Improvement on hardness and corrosion resistance of ferritic stainless steel via PVD-(Ti,Cr)N coatings’, Surf. Coat. Technol., 2013, 231, 380–384.
   Web of Science ®Google Scholar
• Holmberg K and Matthews (eds.) A: ‘Coating tribology: properties, techniques and applications in surface engineering’; 1994, Amsterdam, Elsevier.
   Google Scholar
• Upadhyay RK and Kumaraswamidhas LA: ‘Tungsten/tungsten nitride performance at elevated temperature’, Mater. High Temp., 2014, 31, (2), 102–108.
   Google Scholar
• Larsson M, Bromark M, Hedenqvist P and Hogmark S: ‘Deposition and mechanical properties of multilayered PVD Ti–TiN coatings’, Surf. Coat. Technol., 1995, 76–77, 202–205.
   Web of Science ®Google Scholar
• Shen YG, Mai YW, Zhang QC, McKenzie DR, McFall WD and McBride WE: ‘Residual stress, microstructure, and structure of tungsten thin films deposited by magnetron sputtering’, J. Appl. Phys., 2000, 87, 177–187.
   Web of Science ®Google Scholar
• Liu C, Bi Q and Matthews A: ‘EIS comparison on corrosion performance of PVD TiN and CrN coated mild steel in 0·5 N NaCl aqueous solution’, Corros. Sci., 2001, 43, 1953–1961.
   Web of Science ®Google Scholar
• Ürgen M, Eryilmaz OL, Çakir AF, Kayali ES, Nilüfer B and Işik Y: ‘Characterization of molybdenum nitride coatings produced by arc-PVD technique’, Surf. Coat. Technol., 1997, 95, 501–506.
   Google Scholar
• Perry AJ, Baouchi AW, Petersen JH and Pozder SD: ‘Crystal structure of molybdenum nitride films made by reactive cathodic arc evaporation’, Surf. Coat. Technol., 1992, 54–55, 261–265.
   Web of Science ®Google Scholar
• Tian B, Yue W, Fu Z, Gu Y, Wang C and Liu J: ‘Microstructure and tribological properties of W-implanted PVD TiN coatings on 316L stainless steel’, Vacuum, 2014, 99, 68–75.
   Web of Science ®Google Scholar
• Polcar T, Parreira NMG and Cavaleiro A: ‘Structural and tribological characterization of tungsten nitride coatings at elevated temperature’, Wear, 2008, 265, 319–326.
   Web of Science ®Google Scholar
• Polcar T, Parreira NMG and Cavaleiro A: ‘Tribological characterization of tungsten nitride coatings deposited by reactive magnetron sputtering’, Wear, 2007, 262, 655–665.
   Web of Science ®Google Scholar
• Aouadi SM, Luster B, Kohli P, Muratore C and Voevodin AA: ‘Progress in the development of adaptive nitride-based coatings for high temperature tribological applications’, Surf. Coat. Technol., 2009, 204, 962–968.
   Web of Science ®Google Scholar
• Deng JX and Liu A: ‘Dry sliding wear behavior of PVD TiN, Ti55Al45N, and Ti35Al65N coatings at temperatures up to 600°C’, Int. J. Refract. Met. Hard Mater., 2013, 41, 241–249.
   Web of Science ®Google Scholar
• Barnes AM, Bartle KD and Thibon VRA: ‘A review of zinc dialkyldithiophosphates (ZDDPS): characterisation and role in the lubricating oil’, Tribol. Int., 2001, 34, 389–395.
   Web of Science ®Google Scholar
• Blanco D, González R, Battez AH, Viesca JL and González AF: ‘Use of ethyl-dimethyl-2-methoxyethylammonium tris(pentafluoroethyl)trifluorophosphate as base oil additive in the lubrication of TiN PVD coating’, Tribol. Int., 2011, 44, 645–650.
   Web of Science ®Google Scholar
• Battez AH, González R, Viesca JL, González AF and Hadfield M: ‘Lubrication of PVD coatings with ethyl-dimethyl-2-methoxyethylammonium tris(pentafluoroethyl)trifluorophosphate’, Tribol Int., 2013, 58, 71–78.
   Web of Science ®Google Scholar
• Gu J, Tung S and Barber G: ‘Wear process in manufacturing’, ASTM STP 1362, ASTM, West Conshohocken, PA, USA, 31–47, 1999.
   Google Scholar
• Upadhyay RK, Kumaraswamidhas LA: ‘On the influence of surfactant over friction properties of steel’, Chem. Phys. Lett., 2014, 608, 167–172.
   Web of Science ®Google Scholar
• Bieleman J (Ed.): ‘Additives for coatings’; 200, Weinheim, Wiley-VCH.
   Google Scholar
• Miller CA and Neogi P: ‘Interfacial phenomena equilibrium and dynamic effects’; 2008, Boca Raton, FL, CRC Press.
   Google Scholar