Colorimetric variation of zinc–titanium alloy coatings

References

• P. A. Schweitzer: ‘Corrosion of linings and coatings’, in ‘Cathodic and inhibitor protection and corrosion monitoring’, 403; 2006, Boca Raton, FL, CRC Press Taylor & Francis Group.
   Google Scholar
• J. Zervoudis and G. Anderson: ‘A review of bath alloy additives and their impact on the quality of the galvanized coating’, Proc. 6th Asia Pacific General Galvanizing Conf., Cairns, Australia, 29 May - 2 June 2005.
   Google Scholar
• A. Amadeh, B. Pahlevani and S. Heshmati-Manesh: ‘Effects of rare earth metal addition on surface morphology and corrosion resistance of hot-dipped zinc coatings’, Corros. Sci., 2002, 44, 2321–2331. doi: 10.1016/S0010-938X(02)00043-4
   Web of Science ®Google Scholar
• N. Pistofidis, G. Vourlias, S. Konidaris, E. L. Pavlidou, A. Stergiou and G. Stergioudis: ‘The effect of bismuth on the structure of zinc hot-dip galvanized coatings’. Mater. Lett., 2007, 61, 994–997. doi: 10.1016/j.matlet.2006.06.029
   Web of Science ®Google Scholar
• R. Fratesi, N. Ruffini, M. Malavolta and T. Bellezze: ‘Contemporary use of Ni and Bi in hot-dip galvanizing’. Surf. Coat. Technol., 2002, 157, 34–39. doi: 10.1016/S0257-8972(02)00137-8
   Web of Science ®Google Scholar
• R. Gutenberg, J. Lait and F. Weinberg: ‘Changing Al and Pb bath concentrations in galvanized sheet steel’. Can. Metall. Q., 1990, 29, 307–312. doi: 10.1179/cmq.1990.29.4.307
   Web of Science ®Google Scholar
• R. W. Lewis and G. P. Smyth: ‘Process for the production of coloured coatings’, Canada patent no. 3,530,013, 1970.
   Google Scholar
• M. Tomita, S. Yamamoto and C. Tominaga: ‘Colored zinc coating’, patent no. EP 0269005, 1993.
   Google Scholar
• Q. C. Le and J. Z. Cui: ‘Investigation on colourisation regularity of colouring hot dip galvanisation processing’, Surf. Eng., 2008, 24, 57–62. doi: 10.1179/174329407X265884
   Web of Science ®Google Scholar
• N. Sugawara: ‘Research and development on colored zinc coating technology at Nikko Zinc Company’, Zinc & Lead ‘95, Sendai, Japan, 1995.
   Google Scholar
• T. I. Ender, G. Török and A. Lévai: ‘Revisiting ‘colour’ hot dip galvanizing by titanium bath alloying’, in Proc. Intergalva Conf., Paris, France, 2012.
   Google Scholar
• R. G. Kuehni: ‘Color space and its division’, Color Res. Appl., 2001, 26, 209–222. doi: 10.1002/col.1018
   Web of Science ®Google Scholar
• L. Simonot and M. Elias: ‘Color change due to surface state modification’, Color Res. Appl., 2003, 28, 45–49. doi: 10.1002/col.10113
   Web of Science ®Google Scholar
• E. Franceschi, P. Letardi and G. Luciano: ‘Color measurements on patinas and coating system for outdoor bronze monuments’, J. Cult. Her., 2006, 7, 166–170. doi: 10.1016/j.culher.2006.03.001
   Web of Science ®Google Scholar
• F. L. S. Cuppo, A. García-Valenzuela and J. A. Olivares: ‘Influence of surface roughness on the diffuse near-normal viewing reflectance factor of coatings and its consequences on color measurements’, Color Res. Appl., 2013, 38, 117–187. doi: 10.1002/col.20752
   Web of Science ®Google Scholar
• ‘Colorimetry’, Technical Report 15:2004, Commission Internationale de l’Eclairage, 2004.
   Google Scholar
• ‘Standard pratice for calculation of color tolerances and color differences from instrumentally measured color coordinates’, in ‘Book of standards’, ASTM D2244-11, ASTM International, West Conshohocken, PA, USA, 2011.
   Google Scholar
• ASTM D3134-97R03: ‘Practice for establishing color and gloss tolerances’, in ‘Book of standards’; 2008, West Conshohocken, PA, ASTM International.
   Google Scholar
• M. V. Diamanti, B. Del Curto, V. Masconale, C. Passaro and M. P. Pedeferri: ‘Anodic coloring of titanium and its alloy for jewels production’, Color Res. Appl., 2012, 37, 384–390. doi: 10.1002/col.20683
   Web of Science ®Google Scholar
• I. de Graeve: ‘The road to intelligent coloured coatings’, Surf. Eng., 2011, 10, 719–723. doi: 10.1179/174329411X13178124951231
   Web of Science ®Google Scholar
• ‘Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods’, UNI EN ISO 1461, 2009.
   Google Scholar
• Y. Ohno: ‘Spectral color measurement’, in ‘Colorimetry: understanding the CIE system’, 101–134; 2007, Hoboken, NJ, John Wiley & Sons.
   Google Scholar
• F. Gugliermetti, F. Bisegna and L. Monti: ‘The ‘ID card’ of ancient materials: spectral signature, colour and thermal analysis. A tool for the monitoring and conservation of the archaeological heritage’, J. Int. Color Assoc., 2012, 8, 68–75.
   Google Scholar
• T. H. J. Ellingham: J. Soc. Chem. Ind., 1944, 63, 125–160. doi: 10.1002/jctb.5000630501
   Google Scholar
• E. Gaul: ‘Coloring titanium and related metals by electrochemical oxidation’, J. Chem., 1993, 70, 176–178.
   Web of Science ®Google Scholar
• O. Untracht: ‘Jewelry concepts and technology’; 1982, Garden City, NY, Doubleday.
   Google Scholar